What did you do to your truck today? - Page 248 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

raic65 · 02-04-2013, 01:56 AM

Repaired small rust spots in a steel bed floor I will be installing to replace the wood bed.
Posted via Mobile Device

TehNewGuy · 02-04-2013, 05:20 AM

took a buddy out for a birthday ride... On the way back decided to have some fun and dog it out just a bit... Until I went over a canal bridge at 40 mph... Not smart. Nocked out a good size piece of the dougnut between the manifold and the exhaust pipe, not to mention the original 50 year old exhaust came loose and is swaying back and forth... Guess I know what I'll be doing next!!! ohh and welcome Idaho!!!!
Posted via Mobile Device

E911manager · 02-06-2013, 10:52 PM

Worked on a door and started on a battery mount under the bed.
Posted via Mobile Device

markeb01 · 02-07-2013, 01:22 AM

Swapped jets and metering rods (richer) in the carb today which didn’t resolve the running out of gas problem at full throttle in 3rd gear. I disconnected the mechanical fuel pressure isolator from the pressure regulator to see if that has any effect. Took it out for a run tonight and it's performing perfectly. Not sure how an isolator can cause so much trouble, but I guess that will be next thing I get to figure out.

robber grin · 02-07-2013, 09:32 AM

Picked up the bed-wood my friend Harry cut out for my truck and stacked it in my basement till I can get back too it.
rg

66-PMD-GMC · 02-07-2013, 10:30 AM

Quote:

Originally Posted by markeb01

Swapped jets and metering rods (richer) in the carb today which didn’t resolve the running out of gas problem at full throttle in 3rd gear. I disconnected the mechanical fuel pressure isolator from the pressure regulator to see if that has any effect. Took it out for a run tonight and it's performing perfectly. Not sure how an isolator can cause so much trouble, but I guess that will be next thing I get to figure out.

The interesting thing about your on going story on your truck is that you don't just disconnect the culprit of any problem you are having and go on...
you figure out what is going wrong and make it right... Nice

weaintscared · 02-07-2013, 02:24 PM

Chrome column came in, Man this looks nice and didn't cost a bunch either....$ 219.00
I'm still stacking up parts Need to start puting things back together

My build
http://67-72chevytrucks.com/vboard/s...d.php?t=468622

88Lt1wagon · 02-07-2013, 02:33 PM

Quote:

Originally Posted by weaintscared

Chrome column came in, Man this looks nice and didn't cost a bunch either....$ 219.00
I'm still stacking up parts Need to start puting things back together

My build
http://67-72chevytrucks.com/vboard/s...d.php?t=468622

Where'd you find that? All the ones I'm seeing are about $500 and up

weaintscared · 02-07-2013, 02:39 PM

Quote:

Originally Posted by 88Lt1wagon

Where'd you find that? All the ones I'm seeing are about $500 and up

I bought the one for a floor shifter this is the auto one from the same seller

Check this out on Ebay itm # 321043773957

http://www.ebay.com/itm/CHROME-32-Ti...item4abfb33a05

**jayoldschool** · 02-07-2013, 09:23 PM

Quote:

I didn't realize I had 3, 64-65 caps and 1, 66

What's the difference in the caps? Any idea what these ones I bought are?

ljackson · 02-08-2013, 07:49 PM

Quote:

Originally Posted by jayoldschool

What's the difference in the caps? Any idea what these ones I bought are?

jayoldschool, it looks like you have 64-65 caps.

From what I have learned on here, the 66 caps are the same shape as the 64-65, but the 66 has a raised rib to stiffen the cap so it does not get bent as easily as the 4-5 when it is installed.

66 cap top, 64-64 bottom

**jayoldschool** · 02-08-2013, 08:53 PM

Makes perfect sense, thank you, I continue my learning journey...

Hx16457 · 02-08-2013, 09:14 PM

Had the exhaust installed, then took the wife out for alittle drive!
Dual 2.5" FlowMasters with echo tips!
Posted via Mobile Device

TehNewGuy · 02-09-2013, 11:29 AM

Took the truck out to gather supplies for the new deck. My wife got a great picture of me and my son.

jbgroby · 02-09-2013, 01:38 PM

Wasn't it a great feeling to be using your truck to get the lumber, bet you spend more time talkign about teh ride vs. picking out the lumber.

akaupp · 02-09-2013, 06:40 PM

Didn't happen today, but Monday, I picked up a new carb, Tuesday a step bumper, Wednesday got the new windshield installed along with the new carb, Thursday new points, condenser, cap, rotor, wires and plugs, Friday got it registered for the first time since I've had it.

TehNewGuy · 02-10-2013, 01:58 AM

Quote:

Originally Posted by jbgroby

Wasn't it a great feeling to be using your truck to get the lumber, bet you spend more time talkign about teh ride vs. picking out the lumber.

I love actually using the truck whether it's dump runs, going to a buddy's house to pick starfruit or avacados, or home depot runs. Its just fun to drive, and yea I had about a hour conversation between two different people on the way in and out of getting the lumber haha. And thanks guys my wife will be happy to hear about the photo!
Posted via Mobile Device

markeb01 · 02-10-2013, 01:27 AM

Quote:

Originally Posted by TehNewGuy

Took the truck out to gather supplies for the new deck. My wife got a great picture of me and my son.

I agree, that is a great and timeless shot.

Ta2Don · 02-09-2013, 12:10 PM

Awesome Pic!
Posted via Mobile Device

dantimdad · 02-09-2013, 06:47 PM

Took off the passenger side rocker panel. Gonna order the parts this week: lower door post, rocker panel and rocker backer.

Thank god for spot weld cutters!

Steven

pmkrew · 02-09-2013, 06:53 PM

Bought a Swb "project truck" for parts...
Posted via Mobile Device

chad64chevy · 02-09-2013, 07:25 PM

i finally finished my radio patch! i grinded it a lil more, put some filler on it, let it setup, sanded it smooth, and then i put some primer on it a called it done!! you cant tell it was even patched, heres some pics

Lugnutz65 · 02-09-2013, 09:32 PM

Quote:

Originally Posted by chad64chevy

i finally finished my radio patch! i grinded it a lil more, put some filler on it, let it setup, sanded it smooth, and then i put some primer on it a called it done!! you cant tell it was even patched, heres some pics

Nice job! I gotta do mine sometime. Now I know that it can be done like I planned. Good job!

Lugnutz65 · 02-09-2013, 09:37 PM

I spent 5 GLORIOUS hours pulling stuff off the front.
What a fun day I had!

FROM THIS:

TO THIS: (more pics on my BLOG and photobucket)

**TBONE1964** · 02-10-2013, 05:27 PM

Quote:

Originally Posted by chad64chevy

i finally finished my radio patch! i grinded it a lil more, put some filler on it, let it setup, sanded it smooth, and then i put some primer on it a called it done!! you cant tell it was even patched, heres some pics

Nice work!!!

02-04-2013, 01:56 AM	#1
raic65 Registered User Join Date: May 2011 Location: Bonita, Ca Posts: 156	Re: What did you do to your truck today? Repaired small rust spots in a steel bed floor I will be installing to replace the wood bed. Posted via Mobile Device

02-04-2013, 05:20 AM	#2
TehNewGuy Registered User Join Date: Nov 2012 Location: Miami, Fl Posts: 86	Re: What did you do to your truck today? took a buddy out for a birthday ride... On the way back decided to have some fun and dog it out just a bit... Until I went over a canal bridge at 40 mph... Not smart. Nocked out a good size piece of the dougnut between the manifold and the exhaust pipe, not to mention the original 50 year old exhaust came loose and is swaying back and forth... Guess I know what I'll be doing next!!! ohh and welcome Idaho!!!! Posted via Mobile Device __________________ 1966 Chevy C10 LWB Fleet- Project

02-06-2013, 10:52 PM	#3
E911manager Registered User Join Date: Oct 2011 Location: Blanchard Oklahoma Posts: 424	Re: What did you do to your truck today? Worked on a door and started on a battery mount under the bed. Posted via Mobile Device __________________ My Build CAPRICKUP 1964 Chevy SWB on a 94 Caprice http://67-72chevytrucks.com/vboard/s...d.php?t=492640

02-07-2013, 01:22 AM	#4
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: What did you do to your truck today? Swapped jets and metering rods (richer) in the carb today which didn’t resolve the running out of gas problem at full throttle in 3rd gear. I disconnected the mechanical fuel pressure isolator from the pressure regulator to see if that has any effect. Took it out for a run tonight and it's performing perfectly. Not sure how an isolator can cause so much trouble, but I guess that will be next thing I get to figure out. __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502 Last edited by markeb01; 02-07-2013 at 02:46 AM.

02-07-2013, 09:32 AM	#5
robber grin Registered User Join Date: Apr 2012 Location: Sunny Youngwood PA Posts: 463	Re: What did you do to your truck today? Picked up the bed-wood my friend Harry cut out for my truck and stacked it in my basement till I can get back too it. rg

02-07-2013, 02:24 PM	#7
weaintscared Registered User Join Date: Mar 2011 Location: Sumter SC Posts: 439	Re: What did you do to your truck today? Chrome column came in, Man this looks nice and didn't cost a bunch either....$ 219.00 I'm still stacking up parts Need to start puting things back together My build http://67-72chevytrucks.com/vboard/s...d.php?t=468622 Attached Images

02-08-2013, 08:53 PM	#12
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,170	Re: What did you do to your truck today? Makes perfect sense, thank you, I continue my learning journey...

02-08-2013, 09:14 PM	#13
Hx16457 Registered User Join Date: Sep 2012 Location: Lawton Oklahoma Posts: 308	Re: What did you do to your truck today? Had the exhaust installed, then took the wife out for alittle drive! Dual 2.5" FlowMasters with echo tips! Posted via Mobile Device __________________ People who make excuses didn't want to do it in the first place! http://s1326.photobucket.com/albums/...cpZZ1QQtppZZ16

02-09-2013, 11:29 AM	#14
TehNewGuy Registered User Join Date: Nov 2012 Location: Miami, Fl Posts: 86	Re: What did you do to your truck today? Took the truck out to gather supplies for the new deck. My wife got a great picture of me and my son. Attached Images __________________ 1966 Chevy C10 LWB Fleet- Project

02-09-2013, 01:38 PM	#15
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,772	Re: What did you do to your truck today? Wasn't it a great feeling to be using your truck to get the lumber, bet you spend more time talkign about teh ride vs. picking out the lumber. __________________ http://s1299.photobucket.com/user/jb...23904108567829

02-09-2013, 06:40 PM	#16
akaupp Registered User Join Date: Jan 2013 Location: West Point, UT Posts: 235	Re: What did you do to your truck today? Didn't happen today, but Monday, I picked up a new carb, Tuesday a step bumper, Wednesday got the new windshield installed along with the new carb, Thursday new points, condenser, cap, rotor, wires and plugs, Friday got it registered for the first time since I've had it.

02-09-2013, 12:10 PM	#19
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: What did you do to your truck today? Awesome Pic! Posted via Mobile Device __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

02-09-2013, 06:47 PM	#20
dantimdad Registered User Join Date: Feb 2010 Location: Hartselle, Al. Posts: 466	Re: What did you do to your truck today? Took off the passenger side rocker panel. Gonna order the parts this week: lower door post, rocker panel and rocker backer. Thank god for spot weld cutters! Steven __________________ “Life is and will ever remain an equation incapable of solution, but it contains certain known factors.” - Nikola Tesla Matt. 6:27 "Who of you by worrying can add a single hour to his life?” http://www.67-72chevytrucks.com/vboa...=507266&page=2

02-09-2013, 06:53 PM	#21
pmkrew Registered User Join Date: Sep 2009 Location: Marietta, Ga Posts: 115	Re: What did you do to your truck today? Bought a Swb "project truck" for parts... Posted via Mobile Device

02-09-2013, 07:25 PM	#22
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: What did you do to your truck today? i finally finished my radio patch! i grinded it a lil more, put some filler on it, let it setup, sanded it smooth, and then i put some primer on it a called it done!! you cant tell it was even patched, heres some pics Attached Images __________________ my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163



Register or Log In To remove these advertisements.

02-09-2013, 09:37 PM	#24
Lugnutz65 Registered User Join Date: Jan 2013 Location: Columbia, SC Posts: 1,927	Re: What did you do to your truck today? I spent 5 GLORIOUS hours pulling stuff off the front. What a fun day I had! FROM THIS: TO THIS: (more pics on my BLOG and photobucket) __________________ My 65 C10 build: www.lugnutz65chevystepside.weebly.com Want to know more about T5 transmissions? My website has a T5 Info Page and a Step by Step T5 rebuild.

Register or Log In To remove these advertisements.