What did you do to your truck today? Chapter II - Page 249 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Metaldoc · 01-25-2018, 11:34 PM

Quote:

Originally Posted by Dad's72

Well dang it. I have a 72 super. Wanna trade? Lol. Silly to do away with that.

I don't know why and the brought it back after moving the fuel tank in the 70's. This seat will have to stay in my truck as I need to access the jack and fire extinguisher through the panels behind it.

projectking · 01-26-2018, 09:33 AM

Quote:

Originally Posted by Metaldoc

My seat was done before I picked up the truck and I just put a covering over the back. It was all new foam over the springs when who ever did it. If the foam is still good on yours it doesn't look to be a real hard job to do with new covers.

Foam is in bad shape. Was told the covers are for full foam seats, I’ll have to do some digging. Thanks!

Modaddio · 01-26-2018, 06:26 PM

Had a good friend come over to help start up on the front end. Springs, A Arms, etc.

VWNate1 · 01-26-2018, 10:30 PM

Quote:

Originally Posted by Jason Banks

And 1968

And 1969......

Acorn · 01-27-2018, 12:20 AM

Quote:

Originally Posted by Modaddio

Had a good friend come over to help start up on the front end. Springs, A Arms, etc.

FYI, Your upper control arm is backwards. (On the wrong side)

FRCvette · 01-27-2018, 07:19 AM

It was 60 degrees and sunny here so I drove my truck around all day.

OregonNed · 01-27-2018, 08:26 AM

Just about completed with a rebuild of my carburetor and cleanup. Getting close to startup - just waiting on a new kick down cable bracket and PVC and breather.

Redneck Rydes · 01-27-2018, 09:48 AM

Quote:

Originally Posted by acorn

fyi, your upper control arm is backwards. (on the wrong side)

x2

BugzC10 · 01-27-2018, 02:08 PM

Got the herd out of their corrals then took the truck for a spin to the dump and gas station.

**Beau2a** · 01-27-2018, 06:50 PM

Installed the door and ignition lock set I got from Lockdoc. Also installed new rubber body mounts from GMCPauls.

Ian71GMC · 01-27-2018, 09:15 PM

Took the flatbed off then dropped it off at the body man. Starting with restoring the cab forward. I need to decide if I want to keep the flatbed or find a Fleetside again. Hard finding one in Mid-Missouri worth my time

**Boog** · 01-27-2018, 09:20 PM

Your flip. Easier on our necks.

JMC1965 · 01-27-2018, 09:21 PM

Installed courtesy lights

Ian71GMC · 01-27-2018, 09:22 PM

Quote:

Originally Posted by Boog

Your flip. Easier on our necks.

Thanks. I'm not sure how to flip

Still pretty new to adding pictures

**davischevy** · 01-27-2018, 09:37 PM

Pulled the bed off my K10.

**Boog** · 01-27-2018, 09:41 PM

That's a nifty truck bed lift you've got there Larry. Makes bed removal a one man operation.

**davischevy** · 01-27-2018, 09:56 PM

No mashed fingers, no strained backs, Boog.

stevenfromtexas · 01-27-2018, 11:42 PM

installed my carpet and tried my non-carpentry skills at building the real sub box. hahaha pretty comical. oh well, no better way to learn than screwing something up. gonna head back to HD to get more MDF after church.

69BUCKET · 01-28-2018, 01:31 AM

Got rear buttoned up...waiting on tires...started front...

ZEKE68 · 01-28-2018, 10:56 AM

Got the big block in earlier this week and got the 4L80E in place yesterday. That was a little bit scary installing the 4L80E by myself with a floor jack but it's in. I stayed with the low hump even though I had bought a high hump for it. Have around 3/4" clearance at the top which I hope is enough not to bump. Hate to give up that cup holder I have bolted to the front bottom of the bench seat. Why do the pictures always turn sideways?

BugzC10 · 01-28-2018, 12:04 PM

Quote:

Originally Posted by ZEKE68

Got the big block in earlier this week and got the 4L80E in place yesterday. That was a little bit scary installing the 4L80E by myself with a floor jack but it's in. I stayed with the low hump even though I had bought a high hump for it. Have around 3/4" clearance at the top which I hope is enough not to bump. Hate to give up that cup holder I have bolted to the front bottom of the bench seat. Why do the pictures always turn sideways?

stevenfromtexas · 01-28-2018, 03:24 PM

Why do the pictures always turn sideways?[/QUOTE]

i've been told turn your cell phone where the "home" button is to the right. if you are doing that already; then sorry brother, can't help after that

**Boog** · 01-28-2018, 04:14 PM

here.

**Boog** · 01-28-2018, 04:23 PM

A new use for WeatherTech ?

NoStopN · 01-28-2018, 07:05 PM

Quote:

Originally Posted by Ian71GMC

Now I know what my future holds for me.

01-26-2018, 06:26 PM	#6203
Modaddio Registered User Join Date: Sep 2017 Location: Thompsons Station, TN Posts: 17	Re: What did you do to your truck today? Chapter II Had a good friend come over to help start up on the front end. Springs, A Arms, etc. Attached Images Last edited by Modaddio; 01-26-2018 at 06:36 PM. Reason: Inserting images

01-27-2018, 07:19 AM	#6206
FRCvette Registered User Join Date: Mar 2007 Location: cincy Posts: 694	Re: What did you do to your truck today? Chapter II It was 60 degrees and sunny here so I drove my truck around all day. __________________ There's something women like about a pick-up man 1967 c10 swb Stepside 2004 SSR 2013 Silverado swb

01-27-2018, 08:26 AM	#6207
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today? Chapter II Just about completed with a rebuild of my carburetor and cleanup. Getting close to startup - just waiting on a new kick down cable bracket and PVC and breather. Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

01-27-2018, 02:08 PM	#6209
BugzC10 Registered User Join Date: Oct 2012 Location: Rose Hill Kansas Posts: 1,351	Re: What did you do to your truck today? Chapter II Got the herd out of their corrals then took the truck for a spin to the dump and gas station. Attached Images __________________ 1970 C10 Short Stepper with 71/72 front clip.

01-27-2018, 06:50 PM	#6210
Beau2a Senior Member Join Date: Jan 2016 Location: Enumclaw WA Posts: 267	Re: What did you do to your truck today? Chapter II Installed the door and ignition lock set I got from Lockdoc. Also installed new rubber body mounts from GMCPauls.

01-27-2018, 09:15 PM	#6211
Ian71GMC Registered User Join Date: Jan 2015 Location: Kansas City, MO Posts: 49	Re: What did you do to your truck today? Chapter II Took the flatbed off then dropped it off at the body man. Starting with restoring the cab forward. I need to decide if I want to keep the flatbed or find a Fleetside again. Hard finding one in Mid-Missouri worth my time Attached Images __________________ 1971 GMC C2500 - 350 SB - 700R4 1972 Chevy C10 - 350 SB - TH350

01-27-2018, 09:20 PM	#6212
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,513	Re: What did you do to your truck today? Chapter II Your flip. Easier on our necks. Attached Images __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

01-27-2018, 09:21 PM	#6213
JMC1965 Registered User Join Date: Jul 2017 Location: Dallas, TX Posts: 119	Re: What did you do to your truck today? Chapter II Installed courtesy lights Attached Images __________________ JMC1965 1967 C20 LWB 350 (ATK-HP32) / FiTech EFI 4L60e / 4 wheel disc brakes 20" American Racing VN327 & 245/50/20 Michelin

01-27-2018, 09:37 PM	#6215
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,860	Re: What did you do to your truck today? Chapter II Pulled the bed off my K10. Attached Images __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

01-27-2018, 09:41 PM	#6216
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,513	Re: What did you do to your truck today? Chapter II That's a nifty truck bed lift you've got there Larry. Makes bed removal a one man operation. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

01-27-2018, 09:56 PM	#6217
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,860	Re: What did you do to your truck today? Chapter II No mashed fingers, no strained backs, Boog. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

01-27-2018, 11:42 PM	#6218
stevenfromtexas Registered User Join Date: Mar 2013 Location: Hewitt, Texas Posts: 444	Re: What did you do to your truck today? Chapter II installed my carpet and tried my non-carpentry skills at building the real sub box. hahaha pretty comical. oh well, no better way to learn than screwing something up. gonna head back to HD to get more MDF after church. __________________ Steven '67 SWB, 250ci, 3OTT.......this is my first build...... I wonder if my grand kids will say, "I would give anything to have my grand dads 2005 Chevrolet Z71"

01-28-2018, 01:31 AM	#6219
69BUCKET Registered User Join Date: Oct 2017 Location: Newton Posts: 216	Re: What did you do to your truck today? Chapter II Got rear buttoned up...waiting on tires...started front... Attached Images

01-28-2018, 10:56 AM	#6220
ZEKE68 Registered User Join Date: Jul 2012 Location: Space Coast, Florida Posts: 403	Re: What did you do to your truck today? Chapter II Got the big block in earlier this week and got the 4L80E in place yesterday. That was a little bit scary installing the 4L80E by myself with a floor jack but it's in. I stayed with the low hump even though I had bought a high hump for it. Have around 3/4" clearance at the top which I hope is enough not to bump. Hate to give up that cup holder I have bolted to the front bottom of the bench seat. Why do the pictures always turn sideways? Attached Images __________________ 1968 SWB Step Side, Big Block, 4L80E , Running!

01-28-2018, 03:24 PM	#6222
stevenfromtexas Registered User Join Date: Mar 2013 Location: Hewitt, Texas Posts: 444	Re: What did you do to your truck today? Chapter II Why do the pictures always turn sideways?[/QUOTE] i've been told turn your cell phone where the "home" button is to the right. if you are doing that already; then sorry brother, can't help after that __________________ Steven '67 SWB, 250ci, 3OTT.......this is my first build...... I wonder if my grand kids will say, "I would give anything to have my grand dads 2005 Chevrolet Z71"



Register or Log In To remove these advertisements.

01-28-2018, 04:14 PM	#6223
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,513	Re: What did you do to your truck today? Chapter II here. Attached Images __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

01-28-2018, 04:23 PM	#6224
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,513	Re: What did you do to your truck today? Chapter II A new use for WeatherTech ? Attached Images __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross Last edited by Boog; 01-28-2018 at 04:28 PM.

Register or Log In To remove these advertisements.