1963 C-10 in NC

[1963c-10]

I'll keep the good drum off the driver side, but the rest will end up in the scrap yard then. The front brake lines looked new and I saved those. (I pick up the new 63 Saturday and don't know what all it'll need yet.) Those rubbers made get reused if the ones on the truck are shot. Might be able to salvage the driver side drum also. The cross shafts looked fine, and all the bolts came out just as I wanted them too.

[Sharps40]

Yep, the rubbers had less than 2000 miles on em at the time of the attack.

[1963c-10]

Finally got the call I've been waiting for...."your seat is ready for pick up"!!!! Bad news is I have to work through lunch and have an appointment at 5pm, so it'll be tomorrow before I can go get it.

[TJ's Chevy]

Cool! I can't wait to see it!

[1963c-10]

Change of plans....will be going at lunch, so pics today!!!

[1963c-10]

OK, here it is. Just back from picking up the seat. What do you guys think? Marine grade vinyl and SMS fabric. Total cost off material & labor less than $500.

[Racer2172]

Looks awesome, killer seat!

[1963c-10]

Thank you Racer2172, this one was a long time in the works, so I'm glad to see it done. Now I have to wait a few months before install.

[1963c-10]

Another picture....the cloth is hard to shoot, it keeps looking almost "dirty", have to have good light. These pics are from the shop. The pic two posts above looks much better.

[TheBlueBomber]

[1963c-10]

thanks austin, you'll see it friday

[1963c-10]

Couple more pics of the seat. One of the seat bottom and one of the original seat tag. Tag reads Top line: 2 25 63 Reynolds and bottom line part #3769168

I had a "stiffner" pad added over the springs and we went to 5" foam pad in place of the original 1" foam pad. Had the burlap replaced also. All springs were in great shape and no repair was needed there. Sitting on it is like night and day from the old foam and lmc cover that was installed in 2009.

[TJ's Chevy]

That seat is so awesome!

[TheBlueBomber]

Did the shop make a template from the other cover for future use?

[1963c-10]

Originally Posted by TheBlueBomber

Did the shop make a template from the other cover for future use?

Yes, I plan on doing one in the other 63 too.

[1963c-10]

Originally Posted by T.J. MCCAULEY

That seat is so awesome!

Thanks TJ

[pimpston65]

that seat looks amazing, im redoing my seat from the frame up... what size foam did you use on the seat bottom and the backrest??? im using burlap,jute and either cotton or foam mine is a 65 c10 it calls for 6" full depth seems a bit tall. any help would be awesome....

[WhippinSaw]

That came out sweet. Glad I could help with the template.
Good job 1963-c10. Looks like an original. If they kept the measurements it might help others on the board.

[1963c-10]

Originally Posted by WhippinSaw

That came out sweet. Glad I could help with the template.
Good job 1963-c10. Looks like an original. If they kept the measurements it might help others on the board.

Thanks WhippinSaw....especially for letting me use the template. It'll be back enroute to you thursday or friday (just depends on work). I'm completely thrilled to finally have it done and he did a great job. I couldn't find any differences other than thread color, but the factory never offered blue so we had to go with what looked best. In my opinion after looking at this one, maybe they should have offered it in blue.

The whole thing was a gamble, because you don't have another one to look at to see how it'll really look finished. I hope to see some more 63 seats in different colors....already have mind working for the short fleet!!!!!

And yes, he made a template in case anyone else needs seats done. I'd be glad to help facilitate a cover for someone if it'll help any or i can provide his contact and you can deal with him directly. I supplied vinyl/cloth/seat/$350 and he supplied the rest. He sent me back a great product.

[WhippinSaw]

Your gamble on the color combo really paid off. You don't know what it's going to look like until it's done. The dark blue looks outstanding next to the white and the houndstooth fabric. I'm impressed Good job on documenting the SMS fabric and getting it done. If I knew the correct fabric was available I would of used it when I did mine.

[1963c-10]

Originally Posted by pimpston65

that seat looks amazing, im redoing my seat from the frame up... what size foam did you use on the seat bottom and the backrest??? im using burlap,jute and either cotton or foam mine is a 65 c10 it calls for 6" full depth seems a bit tall. any help would be awesome....

I've got to stop back by there tomorrow. I left the old cover there and I want to put it in the 63 fleet until I do another custom deluxe seat for that one. I'll ask about the exact foam depth he used. I thought it was 2.5" but maybe I misunderstood him. I know that originally there wasn't a whole lot of cushion between me and the seat springs. I used an original 63 seat pattern, and i know they came with full depth foam, and he made this cover to the same specs. I think originally he was going to go with 2.5" but maybe ended up with the 5". I didn't really discuss it when there, just stopped by, let my jaw hit the ground, paid the man a buch of compliments and left after talking for a few.

I'll let you know what he says though. I'll get some pics of the back of the seat also and load tomorrow.

[1963c-10]

After going out and taking some more pics and really looking at the seat....looks like 5" foam on the seat and 2.5" on the back. I had him leave the original burlap on and the original back batting as well because it was in such nice shape. I did have him put new burlap over the old (which is what he recommended due to the age), and he installed a thick jute style pad to the seat before adding the foam and new covers. It gives it a nice firm seat, but a nice soft cushion to sit on. Feels great on my back, which I broke bullriding and again bronc riding in my younger days....so was definitely an upgrade.

[pimpston65]

thks for the specs. seat is worth that price as a guy locally or (LOCO)ly wanted to charge $1000 plus materials, thats when i went ahead and gathered my own supplies and sew it myself!!!!

[1963c-10]

Originally Posted by pimpston65

thks for the specs. seat is worth that price as a guy locally or (LOCO)ly wanted to charge $1000 plus materials, thats when i went ahead and gathered my own supplies and sew it myself!!!!

Theres alot of things i don't mind attempting, but I don't have access to the proper machine. I also know that i personally couldn't have done as good of a job as him, so one of the few jobs I won't do but worth the expense.

There was another local guy who was cheaper, but I wasn't as satisifed with some of the work i saw that he did. My guy (Auto Upholstery 1116 Ramsey Street, Fayetteville, NC) did some work on a few of our family vehicles growing up and a recover for me on my 1st 63 when i was 16. He can do a few week turn around time.

[pimpston65]

sms is high but only one selling that correct stuff