1968 Chevrolet SWB Stepside Restomod

[gdavis]

Originally Posted by Xeen

Hey all;
Wiring progress update.
Today I ran the wiring through the firewall for the brake lights, rear turn signals, rear side markers, reverse lights and license plate light.
I'm going very slowly to make sure I do this right so it may take awhile to finish.

you will get there man. just keep it up. To bad about the weather shutting you down for the winter.

[gdavis]

Hey Brian
I found a bracket. The guy I bought the drive shaft from is giving it to me for the shipping cost. Now you want have to cut yours off in the cold.

[mcbassin]

You got questions about the 1971-72 GM Truck tilt column? I got answers!

Where did you buy repair parts for your tilt column? I need lower bearing/retainer,
backup/park neutral switch, fire wall boot and a few other parts I'm not sure of the names. I would like to find GM parts but I know that's slim to none. I already ordered a NOS turn signal switch from ebay. Any help,? thanks

[Xeen]

Originally Posted by mcbassin

Where did you buy repair parts for your tilt column? I need lower bearing/retainer,
backup/park neutral switch, fire wall boot and a few other parts I'm not sure of the names. I would like to find GM parts but I know that's slim to none. I already ordered a NOS turn signal switch from ebay. Any help,? thanks

You can get quite a few of the parts from LMC on page 134 of their online catalog.
If you need a part they don't list take a picture of it and send it in a private message and I will do my best to help you find one.

[mcbassin]

Originally Posted by Xeen

You can get quite a few of the parts from LMC on page 134 of their online catalog.
If you need a part they don't list take a picture of it and send it in a private message and I will do my best to help you find one.

Thanks.
I found the ones you are talking about at LMC. Not a big fan of there quality. But will use them if I have to. The lower bearing and housing is my biggest concern right now. I have it completely disassembled. I guess there are no replacements from later models like you found for the upper bearing race?

[gdavis]

The guy I bought the drive shaft from couldn't find the carrier bearing bracket. I got one from another board member. He is shipping it to me sometime this week or next. Like you said they are every where. I am now in a place in my build that I can start back working on the old girl. I am not going to paint untill after the first of the year. After the snow has melted and gone.

[gdavis]

today I got my carrier bearing bracket support in the mail and got it all fixed up.

[gdavis]

It is cold here today. around 65. with wind blowing at 20 seems like it is colder.

[gdavis]

done somemore on the truck. take a look

[gdavis]

Hey man where might you be?

[Xeen]

Originally Posted by gdavis

Hey man where might you be?

I'm around and I've been keeping up with your build.
My build is on hold on account of weather, so I'm saving up cash to hit it hard in the spring.

[Vic1947]

Originally Posted by Xeen

I'm around and I've been keeping up with your build.
My build is on hold on account of weather, so I'm saving up cash to hit it hard in the spring.

Glad to see you resurface, Brian. Thought we might have to send out a search party for you. I think the weather has all of us in the midwest hunkering down. Seems like one frigid cold front after another. Nothing like a little cash and warm weather to jump start a project, though.

[Low Elco]

Originally Posted by Vic1947

Glad to see you resurface, Brian. Thought we might have to send out a search party for you. I think the weather has all of us in the midwest hunkering down. Seems like one frigid cold front after another. Nothing like a little cash and warm weather to jump start a project, though.

A-men brother! Don't like all this cold!

[gdavis]

sounds like a real plan. it is had to work in and around the snow and cold winter.

[gdavis]

Thanks for telling me about Vic. I will take his advice on the next size bolt up.

[SeTx67]

Any updates?

[Xeen]

Originally Posted by SeTx67

Any updates?

Not as of yet, I will get back on the build here soon when it warms up a bit, thanks for comming by.

[SeTx67]

Looking forward to seeing you back at it. You've helped me out quite a bit with mine and made my life much easier. I appreciate all the info you've shared and advice you gave me

[gdavis]

Hey Brian it worked on the tap on the hinges.

[Xeen]

Hey all;

It's time to get going on the truck again.
I purchased the CPP Rear Disk brake kit.
Here is the Link.
http://www.ebay.com/itm/1967-68-69-7...item58aedf9ed1

[gdavis]

Brian you going to have one nice ride when you are done.

[Xeen]

Hey all;
As expected my CPP order took a full week to ship so I'm right on schedule LOL.
I have never done a rear disk conversion (add it to the list of firsts) so this should be fun.
Considering I have to pull the axle shafts I will pray to the truck gods that the shafts aren't worn to the point that they are unusable.
While I'm in there I plan to inspect and if necessary replace parts as needed.
I'm not looking forward to this part but I really dislike drum brakes and I would rather spend the time and money doing the conversion than simply repairing the drum brake setup.
Of course there is the added benefit of the improved braking characteristics because when it comes to saving your own ass because someone else doesn't know how drive excellent brakes are key as you all know.
I will post another update once the conversion kit arrives.
Until next time...

[Xeen]

Originally Posted by gdavis

Brian you going to have one nice ride when you are done.

Thanks George.
I'm an amateur though most of this stuff is new to me so I'm learning as I go and it will be far from show quality when I am finished simply because I don't have the necessary experience to do a restoration at that level, plus I don't really have the patience either haha, my plan all along was to make a nice driver.
I am just throwing a lot of money at it and hoping for the best, we will see how it all comes out.

[Bennett68C10]

Originally Posted by Xeen

I am just throwing a lot of money at it and hoping for the best, we will see how it all comes out.

This is the same thought process I have used to build mine and I think it works pretty well, especially for a couple of amateurs like us Nice looking build you have going, you will be happy you went with rear discs. I know I am.

[SeTx67]

Brian, good to see you back at it. In for updates as they come