60-66 Chevy And GMC 4X4's Gone Wild - Page 25 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

schpeen · 02-24-2016, 11:39 AM

Quote:

Originally Posted by 66Gilbert

A Nice 1966 Chevrolet 4X4 Step Side Gone Wild.

Gorgeous !!

1Bad62Pro/Street · 07-18-2015, 07:48 PM

1963 4x4 work in progress
http://www.billstruckshop.com/customers_gallery_60.htm

**Captainfab** · 07-19-2015, 12:08 AM

There are at least 2 different radius arm frame brackets. One is a bit lower than the other. I would use the lowest one, or maybe fabricate your own. There are 'C' bushings available with different degrees of rotation in them.

Quote:

Originally Posted by jaredyocum

I am curious about wether I need to drop the trailing arm mounts lower? I think it will wind up with 4" of lift by welding the coil pockets on lower than they were on the ford but I doubt ford owners lower the brackets with a 4" kit maybe they replace the bushing where it clamps on the axle? I know you want a 10degrees of kingpin rollback to drive great .
Posted via Mobile Device

jaredyocum · 07-18-2015, 01:00 PM

I do plan to use the stock ford radius bars and mounts even . It's a road truck so extra articulation is not really a big deal. Thanks for the advice though I may use it on the next off road truck. I will build a better ps hard rod though , something with less angle . I'm not sure how the steering box and tiered will be just yet . I am using a 79 c-10 2x4 owner box and pitman arm .
Posted via Mobile Device

jaredyocum · 07-18-2015, 01:33 PM

https://www.dropbox.com/sh/wgg1pc065...J7xSlJ6va?dl=0

My picture link
Posted via Mobile Device

RANDY COX · 07-18-2015, 08:35 PM

That's one FINE Stepside..

RANDY COX · 07-19-2015, 08:25 PM

I know that's been done I remember a few yrs back I think it was a 4 wheeler magazine that there was a 67-72 chevy 2WD that was converted to 4x4 using the FORD setup up front and used the 2WD rear and moved the rear trailing arms to sit I think on top of the rear end... the truck looked really good....

jaredyocum · 07-19-2015, 08:53 PM

Quote:

Originally Posted by RANDY COX

I know that's been done I remember a few yrs back I think it was a 4 wheeler magazine that there was a 67-72 chevy 2WD that was converted to 4x4 using the FORD setup up front and used the 2WD rear and moved the rear trailing arms to sit I think on top of the rear end... the truck looked really good....

Yea , there's a guy close to home that did it with a 68 swb and flipped the arm on top of the housing and hung a leaf spring 44 Chevy version and that's what gave me the idea . I don't think ill flip it though just bock the spring 4 in . I did a 90 gmc once ( it was already 4x4) with ford coils and a 9 in because it was cheaper than fixing the split open ifs front and it drove great ! But this will be my first 4 corner coil on road version . I'm not sure to plan to make a sway bar or just try it with out.
Posted via Mobile Device

LostMy65 · 08-09-2015, 02:27 PM

mud.man.rj · 08-10-2015, 09:14 PM

Quote:

Originally Posted by LostMy65

Very cool, might get lost if it's to close to the bush, seems like quality paint work w more than a few hours spent on it too.

spacedebris · 08-10-2015, 09:34 PM

my guess would be a wrap rather than a paint job.

mud.man.rj · 08-10-2015, 11:06 PM

Good thinking on the wrap, how easy it is to forget new things..

Dallas68rat · 08-14-2015, 12:42 PM

My 64 shop truck on 2002 z71 Tahoe chassis

mud.man.rj · 08-14-2015, 03:23 PM

Nice 64 with new underpinnings, can't even tell from far.

padresag · 11-07-2015, 11:24 PM

spotted in the parking lot outside Harbor Freight in Austin (north). Looks like it was maybe on an 88-98 frame ( spotted the IFS as he drove away). anybody know anything about it. found this on the f/b thread.

ron
hard to find this thread sometimes. it gets quite aways back.

piratexpress1369a · 02-23-2016, 10:35 PM

66gilbert did the back doors open on that. ..I don't see any door handles on the back

66Gilbert · 02-23-2016, 11:28 PM

Quote:

Originally Posted by Slow Build

Well, you did ask for wild.

Slow Build,

I think there's a difference between Wild and Barbaric.

Quote:

Originally Posted by piratexpress1369a

66gilbert did the back doors open on that. ..I don't see any door handles on the back

No, it is a 2 door Crew Cab. Wish I some more photos and info on this one.

66Gilbert · 02-23-2016, 11:44 PM

A 1966 Chevy 4x4 Short Bed Gone Bananas Wild.

jaredyocum · 02-24-2016, 09:18 AM

Hey have any of you guys had trouble with stock lug studs being too short for some of these new aluminum rims , I'm looking for some longer 7/16 565 shoulder like 4x4 have on the front but not having much luck , soon be ready to drive though so I'm searching.

patrickk1 · 02-24-2016, 09:42 AM

Quote:

Originally Posted by jaredyocum

Hey have any of you guys had trouble with stock lug studs being too short for some of these new aluminum rims , I'm looking for some longer 7/16 565 shoulder like 4x4 have on the front but not having much luck , soon be ready to drive though so I'm searching.

Check out the Dorman Catalog. They have a ton of different size studs.

sampsmit000 · 02-23-2016, 11:18 PM

subscribed

RANDY COX · 02-24-2016, 09:45 PM

Man that Yellow one that's a whole lot of yeller...I really dig the silver step side and I like the custom touch of those cross flags on the fender...

66Gilbert · 04-24-2016, 01:45 PM

Wish I had more pictures of both of these two. A 64-66 GMC Short Bed 4X4 and A 1966 Chevrolet Long Bed 4X4. Does anyone know how to tell the difference between the three different years on the GMC's ? By emblems, grill, hood, original paint color or scheme or something else?

GMCBURB · 04-24-2016, 08:55 PM

Maybe too obvious but a couple of differences I'm aware of are with the grill letters and hubcaps. The 64-65 grill letters (G and C) were oval shaped while in 66, the G and the C were more squared off... plus the 66 had a groove running though the letters which was painted red. The hubcaps for a 66 had a raised ridge around the center and also at the edge of the three pointed star shape (or whatever you call it). The 64-65 hubcaps were flat here.

duallyjams · 04-25-2016, 08:44 AM

Quote:

Originally Posted by GMCBURB

Maybe too obvious but a couple of differences I'm aware of are with the grill letters and hubcaps. The 64-65 grill letters (G and C) were oval shaped while in 66, the G and the C were more squared off... plus the 66 had a groove running though the letters which was painted red. The hubcaps for a 66 had a raised ridge around the center and also at the edge of the three pointed star shape (or whatever you call it). The 64-65 hubcaps were flat here.

to add to this, on 64 GMC the head light ring used two screws and a spring in 65 the head light ring used three screws to hold the head light and the spring was moved to the head light bucket, 66 used dull wiper arms and the top of the dash was darker, 66 head windshield washer and back up lights both of these were option before 66.
No big changes just a bunch of little things.

07-18-2015, 07:48 PM	#2
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: 60-66 Chevy And GMC 4X4's Gone Wild 1963 4x4 work in progress http://www.billstruckshop.com/customers_gallery_60.htm __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

07-18-2015, 01:00 PM	#4
jaredyocum Registered User Join Date: Jan 2013 Location: canton IL Posts: 29	Re: 60-66 Chevy And GMC 4X4's Gone Wild I do plan to use the stock ford radius bars and mounts even . It's a road truck so extra articulation is not really a big deal. Thanks for the advice though I may use it on the next off road truck. I will build a better ps hard rod though , something with less angle . I'm not sure how the steering box and tiered will be just yet . I am using a 79 c-10 2x4 owner box and pitman arm . Posted via Mobile Device

07-18-2015, 01:33 PM	#5
jaredyocum Registered User Join Date: Jan 2013 Location: canton IL Posts: 29	Re: 60-66 Chevy And GMC 4X4's Gone Wild https://www.dropbox.com/sh/wgg1pc065...J7xSlJ6va?dl=0 My picture link Posted via Mobile Device

07-18-2015, 08:35 PM	#6
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: 60-66 Chevy And GMC 4X4's Gone Wild That's one FINE Stepside.. __________________ 1964 BBC 402 4x4

07-19-2015, 08:25 PM	#7
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: 60-66 Chevy And GMC 4X4's Gone Wild I know that's been done I remember a few yrs back I think it was a 4 wheeler magazine that there was a 67-72 chevy 2WD that was converted to 4x4 using the FORD setup up front and used the 2WD rear and moved the rear trailing arms to sit I think on top of the rear end... the truck looked really good.... __________________ 1964 BBC 402 4x4

08-09-2015, 02:27 PM	#9
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,526	Re: 60-66 Chevy And GMC 4X4's Gone Wild __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

08-10-2015, 09:34 PM	#11
spacedebris Registered User Join Date: Apr 2012 Location: Grants Pass, OR Posts: 543	Re: 60-66 Chevy And GMC 4X4's Gone Wild my guess would be a wrap rather than a paint job. __________________ 1960 c30 Apache Panel w/ '95 cummins bt6 turbo diesel (work in progress) NOTE: due to photobucket trying to extort money my photos are temporarily unavailable. currently looking for alternative to fix issue. http://67-72chevytrucks.com/vboard/s...d.php?t=523009

08-10-2015, 11:06 PM	#12
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: 60-66 Chevy And GMC 4X4's Gone Wild Good thinking on the wrap, how easy it is to forget new things.. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

08-14-2015, 12:42 PM	#13
Dallas68rat Registered User Join Date: Jun 2013 Location: Dallas ga Posts: 3	Re: 60-66 Chevy And GMC 4X4's Gone Wild My 64 shop truck on 2002 z71 Tahoe chassis Attached Images Last edited by Dallas68rat; 08-14-2015 at 12:55 PM.

08-14-2015, 03:23 PM	#14
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: 60-66 Chevy And GMC 4X4's Gone Wild Nice 64 with new underpinnings, can't even tell from far. __________________ 1987 Green n Green machine. 5.0 4spd std. 7" lift w 35's.

11-07-2015, 11:24 PM	#15
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: 60-66 Chevy And GMC 4X4's Gone Wild spotted in the parking lot outside Harbor Freight in Austin (north). Looks like it was maybe on an 88-98 frame ( spotted the IFS as he drove away). anybody know anything about it. found this on the f/b thread. ron hard to find this thread sometimes. it gets quite aways back.

02-23-2016, 10:35 PM	#16
piratexpress1369a Registered User Join Date: Jun 2012 Location: Selkirk Ontario Canada Posts: 1,141	Re: 60-66 Chevy And GMC 4X4's Gone Wild 66gilbert did the back doors open on that. ..I don't see any door handles on the back __________________ My 63 GMC Panel Slow Build http://67-72chevytrucks.com/vboard/s...=1#post5457281 63

02-23-2016, 11:44 PM	#18
66Gilbert 1966 Crew Cab & 4X4 Fanatic Join Date: Dec 2005 Location: Arizona Posts: 904	Re: 60-66 Chevy And GMC 4X4's Gone Wild A 1966 Chevy 4x4 Short Bed Gone Bananas Wild.

02-24-2016, 09:18 AM	#19
jaredyocum Registered User Join Date: Jan 2013 Location: canton IL Posts: 29	Re: 60-66 Chevy And GMC 4X4's Gone Wild Hey have any of you guys had trouble with stock lug studs being too short for some of these new aluminum rims , I'm looking for some longer 7/16 565 shoulder like 4x4 have on the front but not having much luck , soon be ready to drive though so I'm searching. Attached Images

02-23-2016, 11:18 PM	#21
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	Re: 60-66 Chevy And GMC 4X4's Gone Wild subscribed __________________ 1964 Chevy Factory K10 Short Bed Mitchell Sampson



Register or Log In To remove these advertisements.

02-24-2016, 09:45 PM	#22
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: 60-66 Chevy And GMC 4X4's Gone Wild Man that Yellow one that's a whole lot of yeller...I really dig the silver step side and I like the custom touch of those cross flags on the fender... __________________ 1964 BBC 402 4x4

04-24-2016, 01:45 PM	#23
66Gilbert 1966 Crew Cab & 4X4 Fanatic Join Date: Dec 2005 Location: Arizona Posts: 904	Re: 60-66 Chevy And GMC 4X4's Gone Wild Wish I had more pictures of both of these two. A 64-66 GMC Short Bed 4X4 and A 1966 Chevrolet Long Bed 4X4. Does anyone know how to tell the difference between the three different years on the GMC's ? By emblems, grill, hood, original paint color or scheme or something else?

04-24-2016, 08:55 PM	#24
GMCBURB Registered User Join Date: Jul 2013 Location: Falcon, CO Posts: 34	Re: 60-66 Chevy And GMC 4X4's Gone Wild Maybe too obvious but a couple of differences I'm aware of are with the grill letters and hubcaps. The 64-65 grill letters (G and C) were oval shaped while in 66, the G and the C were more squared off... plus the 66 had a groove running though the letters which was painted red. The hubcaps for a 66 had a raised ridge around the center and also at the edge of the three pointed star shape (or whatever you call it). The 64-65 hubcaps were flat here.

Register or Log In To remove these advertisements.