![]() |
|
![]() |
#1 | |
Registered User
Join Date: Jun 2004
Location: Spartanburg, SC
Posts: 1,963
|
Re: The Hillbilly Deluxe dually build
Quote:
I know a few guys over on gmt400 could probably get you a nice used set if you want oem though...
__________________
Paul '78 GMC Serria 15 Heavy Half. 361/NV3500/3.73. Former LWB NV3500 swap Trailing arm swap '98 ECSB Z71 daily driver -traded ![]() '03 burb. Family cruiser http://upstategmtrucks.com/ |
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Sep 2012
Location: Midway, NC
Posts: 3,275
|
Re: The Hillbilly Deluxe dually build
That's a total bummer about the '78. I was looking forward to reading about it. Oh well. I'll take the control arms and all the suspension, lol.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: May 2009
Location: Monroe, LA
Posts: 2,105
|
Re: The Hillbilly Deluxe dually build
'78? Got pics? How did I miss that?
__________________
Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941 |
![]() |
![]() |
![]() |
#4 | |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: The Hillbilly Deluxe dually build
Quote:
![]()
__________________
I'm on the Instagram- @Gearhead_Kevin |
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,977
|
Re: The Hillbilly Deluxe dually build
Tx.... Are those the KH 15x8's on the back of the 78 that you got from me?
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
![]() |
![]() |
![]() |
#6 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,977
|
Re: The Hillbilly Deluxe dually build
Quote:
![]() Oh wait. I have 4 so that's not one too many. Whew, I was worried for a minute.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
![]() |
![]() |
![]() |
#7 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: The Hillbilly Deluxe dually build
You can count on it. I've built this truck to be exactly what I want without any regard to resale or any sort of financial sense. I've wanted this truck for 20 years. If I ever sold it, I doubt I'd be able to replace it with as good of one in the future.
I have three trucks, my little Honda daily driver, two trailers, my tractor and more motorcycles than I can think about. Plus Valerie's car. That's too many to keep on top of.
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
#8 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: The Hillbilly Deluxe dually build
No sir, they're stock 6 inch wheels on all four corners. Powdercoated white with a set of five dollar swap meet hubcaps. 215/75-15 front, 235/75-15 rear. Spindles and springs front, flipped in the rear.
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,977
|
Re: The Hillbilly Deluxe dually build
Gotcha. I'm on the hunt for another pair. Might have to buy them new/aftermarket.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
![]() |
![]() |
![]() |
#10 |
Farm Truck
![]() Join Date: Aug 2006
Location: Jersey Village, Texas
Posts: 547
|
Re: The Hillbilly Deluxe dually build
Going to keep the Hillbilly Deluxe?
__________________
1969 CST/10 1984 K5 Blazer 4x4 2016 Dodge Ram 2500 4x4 Mike Jersey Village, Tx |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Sep 2012
Location: Midway, NC
Posts: 3,275
|
Re: The Hillbilly Deluxe dually build
You see if you were closer I'd take the '78 off your hands. It appears to be in better shape than my ole '76. I understand having one too many. At one time I had three squares. I had my '76 Silverado, '74 Cheyenne Super and '87 Silverado. I like the older round eye ones better. I hated the '87. I'm not an electronic nutt. So when the windows didn't work and other crap didn't work it was time to move on. I like simple. I don't do complex.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC |
![]() |
![]() |
![]() |
#12 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: The Hillbilly Deluxe dually build
I'm somewhat frustrated at the pace I'm making on this dually. I guess I'm saying that my patience is wearing a bit thin.
Here is where I stand now... 1) The fuel filler project is complete other than final hardware to bolt the neck to the bed side. I'm using a couple of various screws right now until my McMaster Carr order of stainless steel bad assedness arrives. I'm currently in day number 9 of it sitting at the UPS Atlanta hub. I contacted McMaster and their response was, "UPS is having a hard time making deliveries into Texas. We are aware of the issue. Please continue to follow the tracking number XXXXXXXXXXX for updates as they occur." 2) Front suspension is rebuilt with new ball joints and lots of cleaning and painting. I cut one coil from the springs to lower the front to match the lowered rear. I also installed new shock absorbers at that time. The control arm bushings were tight both upper and lower so I did not change them. I'm still mulling over the tie rod ends (and awaiting next payday to possibly replace). I have a buddy who does me top of the line alignments. When I call in a favor for an alignment, I try to only take him stuff that's 100 percent perfect. The brake rotors are good and bearings are good. I'm rebuilding the calipers rather than exchange for rebuilt ones because the rebuild kits are a couple of dollars and swapping them out for rebuilt ones is particularly expensive. These aren't the 14 dollar parts store ones like half ton trucks use. More like 40 dollars each. I have new brake hoses to install at that time also. Currently waiting on banjo bolts, banjo bolt crush washers, and wheel bearing dust caps. Both of my caps are haggard so I ordered new ones. They are particularly hard to find. O Reilly cannot get them, Autozone is back ordered on them. No deal at Summit. I had to order from Rockauto. Once my Rockauto and McMaster Carr orders make their way here, it should be short work to finish up and bolt the Alcoas onto the front and set the truck on the ground. At that time, I'll bust down the old front wheels and tires that I took off, powdercoat the wheels, install new tires, and bolt them and the last two Alcoas onto the truck to have a full set of new wheels and tires on the ground, and to be able to see the new lowered stance. I'm not sitting around watching TV here, my hands are just tied until holiday rush at the various shipping companies clears out and my parts arrive here.
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
#13 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,977
|
Re: The Hillbilly Deluxe dually build
Quote:
I just picked it up yesterday.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Aug 2004
Location: Eastern Shore VA
Posts: 366
|
Re: The Hillbilly Deluxe dually build
What size bolts are you waiting on from McMaster? Ive got a pile of SS button heads in 5/16" flavor that I could drop in an envelope and send ya. Ive got 1/2", 3/4" and 1" long with nylocks. Let me know if you want me to send ya a handfull.
__________________
-j-rod '06 3500 LWB CC 4wd, 8.1 Allison |
![]() |
![]() |
![]() |
#15 |
State of Confusion!
![]() ![]() Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,900
|
Re: The Hillbilly Deluxe dually build
Holiday does tend to interfere/cut into that truck time.
![]() Your are making way more progress than I am. But like you I am gathering stuff.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
|
Re: The Hillbilly Deluxe dually build
Good to see ya makin' progress. It's gonna be really nice when it's done. You gonna clean up the paint any?
__________________
Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low! |
![]() |
![]() |
![]() |
#17 | |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: The Hillbilly Deluxe dually build
Ten days, I finally see some progress on the McMaster Carr order. I should have it tomorrow.
![]() Quote:
I should have an update today later. I'm headed home from work now and hope to at least get the rotors, bearings, and calipers done up today. Then it will just be a matter of brake hoses, banjo bolts, and grease dust caps.
__________________
I'm on the Instagram- @Gearhead_Kevin |
|
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Mar 2013
Location: Fayetteville Arkansas
Posts: 830
|
Re: The Hillbilly Deluxe dually build
That storm backed up everything.
__________________
Scott 87 Chevy 2WD SWB, 88 4x4 LWB http://67-72chevytrucks.com/vboard/s...d.php?t=610652 |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Sep 2009
Location: Beaverton, OR from WA State
Posts: 1,515
|
Re: The Hillbilly Deluxe dually build
Excellent! I am happy to hear that you will be able to plug away at things as you would like.
__________________
Devin 1983 GMC High Sierra 2500, 4x4, RC/LB, 400 S.B., SM-465, NP-208, Corporate 10 bolt & 9.5" 14 bolt 1996 GMC Sierra SLE 3500 DRW, 4x4, EC/LB, Vortec 454, NV-4500, BW-4401, AAM 925 & AAM 1050 1997 GMC Sierra SLT 1500 4x4, Z71/F44, EC/SB, Vortec 350 My Introduction with my '83s History New Daily, the '96 |
![]() |
![]() |
![]() |
#20 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: The Hillbilly Deluxe dually build
I've been casually poking away at rebuilding the calipers today.
![]() Rockauto rebuild kits. Just a few dollars each. ![]() The bores of the calipers had a lot of crunchy junk down inside of them. ![]() ![]() Pistons were pretty skunky too. ![]() I soda blasted the pistons and then polished the outer surfaces on my buffing wheel with rouge. ![]()
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
|
Re: The Hillbilly Deluxe dually build
Are they as easy to rebuild as it seems? Barring complications, obviously?
__________________
Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low! |
![]() |
![]() |
![]() |
#22 |
I'm just glad to be here!
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
|
Re: The Hillbilly Deluxe dually build
Those pistons cleaned up nice.
__________________
Karl ![]() 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square |
![]() |
![]() |
![]() |
#23 | |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: The Hillbilly Deluxe dually build
Quote:
There are exactly two parts in the rebuild kit. The sealing ring and the dust boot. ![]() You install the sealing ring into its groove down inside the bore, then the dust boot into its groove. Then lube the piston and bore with clean brake fluid and install the piston into place. The only part that takes any deftness is stretching the dust boot over the piston. You have to push down on the piston and use a hook type of tool to run around the piston to lift the boot over the piston edge. Easier to do than to try and explain. ![]() Thank you Karl. One step at a time and hopefully I'll someday be finished.
__________________
I'm on the Instagram- @Gearhead_Kevin |
|
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Sep 2012
Location: Midway, NC
Posts: 3,275
|
Re: The Hillbilly Deluxe dually build
So do most calipers rebuild the same? Like say on a 1/2 ton will it be rebuilt the same way? It looks fairly easy. Those cleaned up nice.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC |
![]() |
![]() |
![]() |
#25 |
Watch out for your cornhole !
![]() Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: The Hillbilly Deluxe dually build
Exactly the same except being proportionately smaller.
__________________
I'm on the Instagram- @Gearhead_Kevin |
![]() |
![]() |
![]() |
Bookmarks |
|
|