Do you need '64-'66 Chevy Truck Parts?

[towrecker]

...do you have a steel fan shroud v8 this truck had one looked odd though i remember it from when i was a kid but i think a water pump let go and killed it and the radiator the shrouds i have found are like fiberglass can you shed some light or do you have ?? if so how many $$$$ would it take to buy and ship 37659
o...what about a upper radiator pipe it used to have one of those too
thanks,
jason
there has to be something i can buy

[LILRED66]

towrecker:

Thanks for the prompt reply. The factory fan shroud for the V8 trucks was fiberglass. I don't have any right now, however, you can get them at:

www.lmctruck.com
www.classicparts.com
www.oldchevytrucks.com
www.bowtiebits.com

If you need the upper radiator hose for a V8, I sell the hard pipe radiator hose like this:

http://67-72chevytrucks.com/vboard/s...d.php?t=322792

This kit includes the hard pipe, four tower clamps and two starter hoses. The complete kit is $50.00, plus $9.95 packaing & shipping.

Please let me know if I can help you with this item or other 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

[1971 GMC SHORTY]

I would like to find a nice 1964-66 left drivers door custom cab moldeings. Ship to 91340.. Have a nice tailgate to trade??? Thanks

[LILRED66]

Originally Posted by 1971 GMC SHORTY

I would like to find a nice 1964-66 left drivers door custom cab moldeings. Ship to 91340.. Have a nice tailgate to trade??? Thanks

Good evening and thanks for the inquiry. I have a few nice sets fof 4-5-6 Chevy truck Custom cab sails.

Is the tailgate a fleetside or stepside? Chevy or GMC?

Please let me know and I will reply accordingly. Thanks for the opportunity.

[1971 GMC SHORTY]

Fleetside tail gate very nice from calif

[1971 GMC SHORTY]

Originally Posted by 1971 gmc shorty

fleetside tail gate very nice from calif

chevrolet

[LILRED66]

Originally Posted by 1971 GMC SHORTY

chevrolet

I have sent you a PM.

[jame]

Do you have the throttle rod and swivel for a 63 chevy v8 4 bbl. That was taken off my truck before I got it. I'm unsure if a 6 cylinder one is different, but I need to connect to an eldelbrock carb. I'm at the lake of the ozarks zip 65037. Thanks

[jwart]

do you have drivers door for 65 C-10fleet with wing window. how much &shipped to 60002? thanks jw

[LILRED66]

Originally Posted by jame

Do you have the throttle rod and swivel for a 63 chevy v8 4 bbl. That was taken off my truck before I got it. I'm unsure if a 6 cylinder one is different, but I need to connect to an eldelbrock carb. I'm at the lake of the ozarks zip 65037. Thanks

Good morning and Happy Easter. Thanks for the inquiry. I know what you mean by the throttle rod, but I am unsure of what you mean by the swivel. I have factory V8 throttle rods and the accelerator assembly at the firewall, so if that is what you mean, I can help.

Please clarify what you need and I will reply accordingly and thanks for the opportunity.

[LILRED66]

Originally Posted by jwart

do you have drivers door for 65 C-10fleet with wing window. how much &shipped to 60002? thanks jw

jw:

Good morning and Happy Easter. Thanks for the opportunity. I sell good, used door shells for $175.00, plus shipping, via Greyhound-Freight. You will have to pick the item up at the Greyhound terminal nearest your location. Greyhound-Freight costs $85.00.

Please let me know if I can help you with this item or other good, used 4-5-6 Chevy trucks parts in the future and thanks for the opportunity.

[66BowTieBoy]

Tony,

Happy Easter to ya and tell me, what do you get for a bench seat for my '66..?

Thanks.

[jame]

Sorry I was not clear, not having one I was unsure the correct wording. I need the rod that connects the part on the firewall and the end piece that threads on to the rod and fits in the carb allowing length adjustment. I'm unsure if it fits on a ball mounted on the carb or if it fits in a bushing in the carb and has a clip that holds it on. I called it a swivel because LMC call the clutch adjustment rod end piece a swivel -thanks again

[wc63]

hey lilred,
im looking for an intake manifold for the 315e gmc. please let me know if you have one and how much. also a fuel gauge for a 63 gmc would be much appreciated.

[wc63]

sorry about that lilred, the intake needed is for a 351e

[Jimmy S.]

Do you have any steering columns for 66 Chevy truck?

Thanks,Jimmy

[LILRED66]

Originally Posted by 66BowTieBoy

Tony,

Happy Easter to ya and tell me, what do you get for a bench seat for my '66..?

Thanks.

66BowTieBoy:

Good afternoon and thanks for the inquiry. I have a few very nice factory bench seats, but the shipping would make them uneconomical. Have you checked craigs list in your area?

[LILRED66]

Originally Posted by jame

Sorry I was not clear, not having one I was unsure the correct wording. I need the rod that connects the part on the firewall and the end piece that threads on to the rod and fits in the carb allowing length adjustment. I'm unsure if it fits on a ball mounted on the carb or if it fits in a bushing in the carb and has a clip that holds it on. I called it a swivel because LMC call the clutch adjustment rod end piece a swivel -thanks again

jame:

Good afternoon and thanks for the inquiry. I have a throttle rod for a factory V8. It attaches to the carburetor at one end and to the accelerator linkage at the other end. It is $25.00, including the ride.

Please let me know if I can help you with this item or other 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

[LILRED66]

Originally Posted by wc63

hey lilred,
im looking for an intake manifold for the 315e gmc. please let me know if you have one and how much. also a fuel gauge for a 63 gmc would be much appreciated.

Adrian:

Good afternoon and thanks for the inquiry. I tried to send you an e-mail at the address you provided this morning, but it kicked it back. In any case, I don't have a factory 351E V6 intake manifold. I have put out a few feelers and will try to locate one for you.

Sorry I couldn't help you with this item, but please keep me in mind for other 4-5-6 Chevy/GMC truck parts in the future and thanks for the opportunity.

[LILRED66]

Originally Posted by Jimmy S.

Do you have any steering columns for 66 Chevy truck?

Thanks,Jimmy

Jimmy:

Good afternoon and thanks for the inquiry. I have a few factory steering columns. Do you need an automatic, three speed or floor shift column? Please let me know and I will reply accordingly. Thanks for the opportunity.

[Jimmy S.]

The floor shift column,

Jimmy

[LILRED66]

Originally Posted by Jimmy S.

The floor shift column,

Jimmy

Jimmy:

Thanks for the prompt reply. I have a few factory floor shift columns. Without the steering wheel, a good, used factory floor shift steering column is $100.00, plus $42.00 packaging & shipping, via UPS or FedEx-Ground.

I accept cashiers check, money order or PayPal at:

4-5-6chevytrucks@sbclobal.net

Please let me know if I can help you with this item or other 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

[Sal's '55 Chevy]

hey lilred i was wondering how much you would sell me some wheel tubs for either year i do need a good pair.

[66BowTieBoy]

Tony,

I'm in KC from time to time and maybe I could pickup at your place..? Need the whole thing, (seat & mountings). So what would it cost me?
Thanks.

[LILRED66]

Originally Posted by Sal's '55 Chevy

hey lilred i was wondering how much you would sell me some wheel tubs for either year i do need a good pair.

Sal:

Good morning and thanks for the inquiry. A good, used set of rear fleetside wheel tubs is $125.00, plus $45.00 packaging & shipping, via UPS or FedEx-Ground.

Please let me know if I can help you with this item or other good, used 4-5-6 Chevy truck parts in the future and thanks for the opportunity.