PO has me PO'd - Page 25 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jb4short · 05-17-2008, 01:22 AM

Quote:

Originally Posted by jaros44sr

Keep it down there, Sunny and 75 here. Can I post up a pic of those new headers ya got

definately- I took some but accidently took the card with my laptop

Should I stay a few more days?

**jaros44sr** · 05-17-2008, 01:50 AM

Quote:

Originally Posted by Tri-ProAutomotive

definately- I took some but accidently took the card with my laptop

Should I stay a few more days?

Sure, nothing exciting around the shop. Wifey wants to do lunch at the Shore, so I'm takin' Friday off. Plus I sliced my knuckle open, so it needs a couple days to heal...

Sell any parts?

jb4short · 05-17-2008, 02:08 AM

Quote:

Originally Posted by jaros44sr

Sure, nothing exciting around the shop. Wifey wants to do lunch at the Shore, so I'm takin' Friday off. Plus I sliced my knuckle open, so it needs a couple days to heal...

Sell any parts?

Bought a bunch- wait til you see the goodies roll in

**jaros44sr** · 05-17-2008, 02:09 AM

Quote:

Originally Posted by Tri-ProAutomotive

Bought a bunch- wait til you see the goodies roll in

Come on, spill the beans

jb4short · 05-17-2008, 02:34 AM

Quote:

Originally Posted by jaros44sr

Come on, spill the beans

You'll have to wait til you come back from the Show-Ah

**jaros44sr** · 05-17-2008, 03:12 AM

Quote:

Originally Posted by Tri-ProAutomotive

You'll have to wait til you come back from the Show-Ah

Must be a Maine thing, rite?

Dude, that ain't fair

msgross · 05-18-2008, 03:13 AM

Glad I finally found all your pictures on the floor install. I'll be ready to start cutting after my vacation is over. Then i'll see if I need any extra pieces from Jon as well. Stay tuned everyone, another floor install will be starting soon. Who needs a rust free Arizona cab anyway, not us!

Good work...

**jaros44sr** · 05-22-2008, 01:12 AM

Got some more work done today, worked in the kick panel area. Sure is nice to work in this area without the cowl on it. I cut out a small notch on the kick panel(top rear bolt) so it fits tighter on the floor pan, no gap when bolted up

Chevyman63 · 05-22-2008, 01:18 AM

Very cool...

msgross · 06-01-2008, 09:53 PM

so are you gettin mileage for this job? sounds like a few trips upstate!

Looks good...

**jaros44sr** · 06-02-2008, 12:05 AM

yeah, gas prices are thru the roof around here. Are you back from Vacation? Thanks

msgross · 06-02-2008, 01:06 AM

yep... put my tax stimulus check to work... in Europe! don't tell GW shhh...

Had a great time but spent waaaay more than I wanted, damn Euro exchange rate.

**jaros44sr** · 06-02-2008, 01:22 AM

Quote:

Originally Posted by msgross

yep... put my tax stimulus check to work... in Europe! don't tell GW shhh...

Had a great time but spent waaaay more than I wanted, damn Euro exchange rate.

Well, fun costs money...projected starting date still in august?

**jaros44sr** · 06-02-2008, 01:50 AM

Here's some current pics.

Don't look at this one too long or your eyes will cross

**jaros44sr** · 07-16-2008, 02:50 PM

This is where I left off for Jon on the cab corner, he has someone else taking over as I have to start a new job on Monday

Another front end, POS replacement parts fit like a glove(sorry Jon, just had to say it...LOL)

Chevyman63 · 07-16-2008, 05:15 PM

Hey, I seem to remember that Jimmy from a while ago.

So what's the new job thing?

**jaros44sr** · 07-16-2008, 06:28 PM

Well, the short story is.....it was a 3 month hiring process for a large pharmaceutical co. Background check, blood and drug check, 3 interviews and it had tobe approved by a VP or above. I should be able to get a job at the Gov's office now

. I start Monday

But the good news is I get to play with the Jimmy again

Chevyman63 · 07-17-2008, 06:41 AM

Quote:

Originally Posted by jaros44sr

Well, the short story is.....it was a 3 month hiring process for a large pharmaceutical co. Background check, blood and drug check, 3 interviews and it had tobe approved by a VP or above. I should be able to get a job at the Gov's office now

. I start Monday

But the good news is I get to play with the Jimmy again

Sweet...good luck at the new job.

vtblazer · 07-17-2008, 07:07 AM

Quote:

Originally Posted by jaros44sr

But the good news is I get to play with the Jimmy again

I'd say that's the BEST news!

What's the plan of attack/focus this time 'round?

I'm into boating now, gonna sell off all the blazers myself...

Chevyman63 · 07-17-2008, 07:13 AM

Quote:

Originally Posted by vtblazer

I'm into boating now, gonna sell off all the blazers myself...

Pardon me?

I find that hard to believe?

jb4short · 07-17-2008, 07:21 AM

Quote:

Originally Posted by jaros44sr

This is where I left off for Jon on the cab corner, he has someone else taking over as I have to start a new job on Monday

Another front end, POS replacement parts fit like a glove(sorry Jon, just had to say it...LOL)

Gotta pull back for a bigger shot- that looks great. Are those the moldings from upstate?

Big J · 07-17-2008, 08:51 AM

Congrats on the job Jim. Sounds awesome. So your gonna be a drug dealer now are ya, lol.....

**jaros44sr** · 07-17-2008, 09:07 AM

Thanks Jon, but I'm as far back as I can go, I'm in the basement as it is

Those moldings came from ScottH in Tom's River, 20.00 and 10.00 for the headlite surrounds. What a guy and what a deal. The ones in Upstate were junk, cracked torn and dented...caveat emptor, I'll keep looking for steel, I like the look of Kevs Classic

BTW, I was cursing your product...turn signals wouldn't fit!! On the off chance, I switched them from right to left, and they dropped rite in, call me an idiot.

Did ya get a chance to look at that eyebrow and hood trim yet, who's the vender, I may be going that way

Your stuff is JUNK,

and I highly recommend it to everyone. I have not had one piece that doesn't fit well. I still have more pcs. to fit so we'll see... cowl hood, inner fender wells

**jaros44sr** · 07-17-2008, 09:14 AM

Quote:

Originally Posted by Big J

Congrats on the job Jim. Sounds awesome. So your gonna be a drug dealer now are ya, lol.....

Huge dealer, largest manufactorer!!! I've bin trying to work for this company for 30 years, Thanks for the congrats. Your project is looking great, any answers on how to fill in those little rusty spots the sandblaster left?

jb4short · 07-17-2008, 09:49 AM

Quote:

Originally Posted by jaros44sr

Thanks Jon, but I'm as far back as I can go, I'm in the basement as it is

Those moldings came from ScottH in Tom's River, 20.00 and 10.00 for the headlite surrounds. What a guy and what a deal. The ones in Upstate were junk, cracked torn and dented...caveat emptor, I'll keep looking for steel, I like the look of Kevs Classic

BTW, I was cursing your product...turn signals wouldn't fit!! On the off chance, I switched them from right to left, and they dropped rite in, call me an idiot.

Did ya get a chance to look at that eyebrow and hood trim yet, who's the vender, I may be going that way

Your stuff is JUNK,

and I highly recommend it to everyone. I have not had one piece that doesn't fit well. I still have more pcs. to fit so we'll see... cowl hood, inner fender wells

As you know; I also need a set....so if you know where the "Good ones" come from keep me posted. Those trim pieces haven't come in and, as of right now, I don't have a firm date for them.

05-18-2008, 03:13 AM	#607
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: PO has me PO'd Glad I finally found all your pictures on the floor install. I'll be ready to start cutting after my vacation is over. Then i'll see if I need any extra pieces from Jon as well. Stay tuned everyone, another floor install will be starting soon. Who needs a rust free Arizona cab anyway, not us! Good work... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 05-18-2008 at 03:14 AM.

05-22-2008, 01:12 AM	#608
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: PO has me PO'd Got some more work done today, worked in the kick panel area. Sure is nice to work in this area without the cowl on it. I cut out a small notch on the kick panel(top rear bolt) so it fits tighter on the floor pan, no gap when bolted up __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 05-22-2008 at 01:27 AM.

05-22-2008, 01:18 AM	#609
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: PO has me PO'd Very cool... __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

06-01-2008, 09:53 PM	#610
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: PO has me PO'd so are you gettin mileage for this job? sounds like a few trips upstate! Looks good... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

06-02-2008, 12:05 AM	#611
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: PO has me PO'd yeah, gas prices are thru the roof around here. Are you back from Vacation? Thanks __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

06-02-2008, 01:06 AM	#612
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: PO has me PO'd yep... put my tax stimulus check to work... in Europe! don't tell GW shhh... Had a great time but spent waaaay more than I wanted, damn Euro exchange rate. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 06-02-2008 at 01:06 AM.

06-02-2008, 01:50 AM	#614
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: PO has me PO'd Here's some current pics. Don't look at this one too long or your eyes will cross __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 06-02-2008 at 01:55 AM.

07-16-2008, 02:50 PM	#615
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: PO has me PO'd This is where I left off for Jon on the cab corner, he has someone else taking over as I have to start a new job on Monday Another front end, POS replacement parts fit like a glove(sorry Jon, just had to say it...LOL) __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 07-16-2008 at 03:22 PM.

07-16-2008, 05:15 PM	#616
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: PO has me PO'd Hey, I seem to remember that Jimmy from a while ago. So what's the new job thing? __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

07-16-2008, 06:28 PM	#617
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: PO has me PO'd Well, the short story is.....it was a 3 month hiring process for a large pharmaceutical co. Background check, blood and drug check, 3 interviews and it had tobe approved by a VP or above. I should be able to get a job at the Gov's office now. I start Monday But the good news is I get to play with the Jimmy again __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

07-17-2008, 08:51 AM	#622
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,772	Re: PO has me PO'd Congrats on the job Jim. Sounds awesome. So your gonna be a drug dealer now are ya, lol..... __________________ BAZINGA! My Build

07-17-2008, 09:07 AM	#623
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,759	Re: PO has me PO'd Thanks Jon, but I'm as far back as I can go, I'm in the basement as it is Those moldings came from ScottH in Tom's River, 20.00 and 10.00 for the headlite surrounds. What a guy and what a deal. The ones in Upstate were junk, cracked torn and dented...caveat emptor, I'll keep looking for steel, I like the look of Kevs Classic BTW, I was cursing your product...turn signals wouldn't fit!! On the off chance, I switched them from right to left, and they dropped rite in, call me an idiot. Did ya get a chance to look at that eyebrow and hood trim yet, who's the vender, I may be going that way Your stuff is JUNK, and I highly recommend it to everyone. I have not had one piece that doesn't fit well. I still have more pcs. to fit so we'll see... cowl hood, inner fender wells __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 07-17-2008 at 09:32 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.