Whose on Steelies? Post 'em up! - Page 25 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

scrich24 · 04-24-2013, 10:09 AM

Going to bolt them on later this week. 255/70R15 on 15x8 rallys

Name: rally.jpg
Views: 3115
Size: 45.8 KB

harrydunn · 04-24-2013, 10:40 AM

Took the original split rims off for one-piece 16's. Found and restored a set of chrome caps to replace the original white painted caps. Restoring the faded trim paint in the second photo. A real time consumer!

Longhorn321 · 04-24-2013, 11:08 AM

Quote:

Originally Posted by harrydunn

Took the original split rims off for one-piece 16's. Found and restored a set of chrome caps to replace the original white painted caps. Restoring the faded trim paint in the second photo. A real time consumer!

Just curious, are you going to spray that trim or paint it with a brush? Same goes for the hubcaps...did you spray or brush?

harrydunn · 04-24-2013, 11:28 AM

Quote:

Just curious, are you going to spray that trim or paint it with a brush? Same goes for the hubcaps...did you spray or brush?

Sprayed both. Took many hours to do all four. I spaced it out over several weeks so I wouldn't get sick of it.

The thin darker blue tape is 3M vinyl-style tape which is easier to work with around corners, etc. O'Reilly's had it but I had to ask for it from their paint department. They don't stock it on the shelves.

**yote1234** · 04-24-2013, 12:08 PM

i love steel wheels...stock!

Longhorn321 · 04-24-2013, 01:04 PM

Quote:

Originally Posted by harrydunn

Sprayed both. Took many hours to do all four. I spaced it out over several weeks so I wouldn't get sick of it.

The thin darker blue tape is 3M vinyl-style tape which is easier to work with around corners, etc. O'Reilly's had it but I had to ask for it from their paint department. They don't stock it on the shelves.

Cool. Thanks.

Lou Boffa · 04-24-2013, 01:35 PM

Texas Copperhead

waybad · 04-24-2013, 04:31 PM

are the factory hub caps 10 1/8? I am looking at these for my truck and want factory caps
http://www.summitracing.com/parts/wv...4044/overview/

shawno72 · 04-24-2013, 04:37 PM

Quote:

Originally Posted by waybad

are the factory hub caps 10 1/8? I am looking at these for my truck and want factory caps
http://www.summitracing.com/parts/wv...4044/overview/

Those will work but make sure you get either the 5 on 5 bolt pattern for 5 lug or the 6 on 5.5 for 6 lug bolt pattern.

waybad · 04-24-2013, 05:05 PM

Quote:

Originally Posted by shawno72

Those will work but make sure you get either the 5 on 5 bolt pattern for 5 lug or the 6 on 5.5 for 6 lug bolt pattern.

thanks,, I need the 5-4 3/4.. I have the car hubs/front and nova rear!!
thank for checking on me though!!!

shawno72 · 04-24-2013, 05:14 PM

Quote:

Originally Posted by waybad

thanks,, I need the 5-4 3/4.. I have the car hubs/front and nova rear!!
thank for checking on me though!!!

Ahhh, then those wheels are what you want for the stock look with the original hub caps..

jkeating1 · 05-03-2013, 09:51 AM

I don't guess this is what you mean by "who's on steelies?", huh? When you can see the steel in the tire, that's not a good day!

**68bowtie** · 05-03-2013, 11:27 AM

Quote:

Originally Posted by jkeating1

I don't guess this is what you mean by "who's on steelies?", huh? When you can see the steel in the tire, that's not a good day!

ah come on, you can get another couple thousand out of those. just keep it under 2mph!!

zellway · 05-03-2013, 11:57 AM

Few different setups I have had on my old burb.

Mr Chevorlet · 05-03-2013, 02:49 PM

I looked at all these pages of wheels maybe i overlooked them but i wanted to see what an original 67 4 wheel drive hubcap and wheel looked like,on the front of the truck. Do any of you have a picture if so thanks

Prematuregrey · 05-03-2013, 03:29 PM

Quote:

Originally Posted by Mr Chevorlet

I looked at all these pages of wheels maybe i overlooked them but i wanted to see what an original 67 4 wheel drive hubcap and wheel looked like,on the front of the truck. Do any of you have a picture if so thanks

Not a 67, but here's some on my 71 K20.

tookece · 05-03-2013, 08:35 PM

Name: IMG_0809.jpg
Views: 2561
Size: 43.7 KB

Name: IMG_0812.jpg
Views: 2569
Size: 74.3 KB

New old shoes

jhwkns · 05-03-2013, 09:49 PM

I replaced my worn out tires with a set of 275/ 60's I had on hand. I think I forgot how big these were.

Nothing rubs though.

**Todd68Chevy** · 05-04-2013, 06:10 AM

Quote:

Originally Posted by Mr Chevorlet

I looked at all these pages of wheels maybe i overlooked them but i wanted to see what an original 67 4 wheel drive hubcap and wheel looked like,on the front of the truck. Do any of you have a picture if so thanks

I am not 100% sure but according to this thread http://67-72chevytrucks.com/vboard/s...d.php?t=564724 1967-68 4wd did not have hub caps.

I am pretty sure 67/ 68 used the full hub cap in picture one but the hub cap in picture 2 is for a 4wd but I was told they came out on 69 and up. They look like they would match if you wanted full caps but they would not be original. Hope this helps.

502ms · 05-04-2013, 07:08 AM

Quote:

Originally Posted by BionicABs1

[/IMG]

Detroit Steel is where I was thinking of going with mine. I see you may have done the same. What size front and rear? What tire sizes? I am not copying. Just curious.
Posted via Mobile Device

jkeating1 · 05-04-2013, 09:21 AM

Quote:

Originally Posted by Todd68Chevy

I am not 100% sure but according to this thread http://67-72chevytrucks.com/vboard/s...d.php?t=564724 1967-68 4wd did not have hub caps.

I am pretty sure 67/ 68 used the full hub cap in picture one but the hub cap in picture 2 is for a 4wd but I was told they came out on 69 and up. They look like they would match if you wanted full caps but they would not be original. Hope this helps.

I was a porter in a Chevy dealership back then, and my recollection is that 4wd's didn't have caps until at least 69. Maybe even a year or two later than that.
Posted via Mobile Device

Likeaboss302 · 05-04-2013, 02:54 PM

Here's mine:
255/70 up front and behind, stock suspension with coils in the back. Painted the insides black with that plastidip crap. Wheels are 15x8.5 if I recall correctly.

ole dollor · 05-04-2013, 04:36 PM

Quote:

Originally Posted by Likeaboss302

Here's mine:
255/70 up front and behind, stock suspension with coils in the back. Painted the insides black with that plastidip crap. Wheels are 15x8.5 if I recall correctly.

yoy have a nice truck...i have always liked those wheels with the centers and beauty rings

chevy4wheeler59 · 05-05-2013, 04:24 PM

Quote:

Originally Posted by Mr Chevorlet

I looked at all these pages of wheels maybe i overlooked them but i wanted to see what an original 67 4 wheel drive hubcap and wheel looked like,on the front of the truck. Do any of you have a picture if so thanks

There ya go, 67 K 20 3/4 4x4 all original

cabman420 · 05-05-2013, 05:09 PM

Here's mine!!

04-24-2013, 10:09 AM	#601
scrich24 Registered User Join Date: Apr 2013 Location: Bloomington, IN Posts: 11	Re: Whose on Steelies? Post 'em up! Going to bolt them on later this week. 255/70R15 on 15x8 rallys

04-24-2013, 10:40 AM	#602
harrydunn Registered User Join Date: Dec 2010 Location: Columbia, MO Posts: 256	Re: Whose on Steelies? Post 'em up! Took the original split rims off for one-piece 16's. Found and restored a set of chrome caps to replace the original white painted caps. Restoring the faded trim paint in the second photo. A real time consumer! __________________ 1972 GMC 2500 Custom, 96K miles, Purchased New By My Grandparents 2016 Toyota Tundra TRD Off-Road SR5 1993/2003/2005 Toyota Land Cruisers 2004 Corvette Z06 / 2000 Covette Coupe 2006 Ducati Multistrada 2014 BMW X3 XDrive35i M Sport

04-24-2013, 12:08 PM	#605
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,406	Re: Whose on Steelies? Post 'em up! i love steel wheels...stock! Attached Images __________________ 1971 K5 CST Blazer 1965 Chevelle Malibu 283 (sadly sold) 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

04-24-2013, 01:35 PM	#607
Lou Boffa Registered User Join Date: Jan 2013 Location: San Antonio, TX Posts: 733	Re: Whose on Steelies? Post 'em up! Texas Copperhead Attached Images

04-24-2013, 04:31 PM	#608
waybad Registered User Join Date: Jan 2010 Location: Evansville,IN Posts: 409	Re: Whose on Steelies? Post 'em up! are the factory hub caps 10 1/8? I am looking at these for my truck and want factory caps http://www.summitracing.com/parts/wv...4044/overview/

05-03-2013, 09:51 AM	#612
jkeating1 Registered User Join Date: Dec 2012 Location: Allen, TX Posts: 519	Re: Whose on Steelies? Post 'em up! I don't guess this is what you mean by "who's on steelies?", huh? When you can see the steel in the tire, that's not a good day! Attached Images __________________ JK

05-03-2013, 11:57 AM	#614
zellway Registered User Join Date: Dec 2009 Location: Arizona City, AZ Posts: 747	Re: Whose on Steelies? Post 'em up! Few different setups I have had on my old burb. Attached Images __________________ ----------------------------------------------------------- Erik My 69 suburban http://67-72chevytrucks.com/vboard/s...d.php?t=530626 1970 C10 step Project Jiminy http://67-72chevytrucks.com/vboard/s...d.php?t=682647 RUST!? Thats just mother natures way of telling all of us.....MINE!!!!

05-03-2013, 02:49 PM	#615
Mr Chevorlet Rusty Nuts Join Date: Sep 2008 Location: Clever Missouri Posts: 1,338	Re: Whose on Steelies? Post 'em up! I looked at all these pages of wheels maybe i overlooked them but i wanted to see what an original 67 4 wheel drive hubcap and wheel looked like,on the front of the truck. Do any of you have a picture if so thanks __________________ (Clever Missouri) Southwest Larry Mr Chevrolet My Build, The Marathon Truck http://67-72chevytrucks.com/vboard/s...d.php?t=604414

05-03-2013, 08:35 PM	#617
tookece Registered User Join Date: Mar 2013 Location: New Caney, Tx. Posts: 18	Re: Whose on Steelies? Post 'em up! New old shoes

05-03-2013, 09:49 PM	#618
jhwkns Registered Cruiser Join Date: May 2002 Location: Las Vegas NV Posts: 2,230	Re: Whose on Steelies? Post 'em up! I replaced my worn out tires with a set of 275/ 60's I had on hand. I think I forgot how big these were. Nothing rubs though. __________________ I intend to live forever. So far, so good.

05-04-2013, 02:54 PM	#622
Likeaboss302 Registered User Join Date: Sep 2012 Location: Fort Smith, AR Posts: 23	Re: Whose on Steelies? Post 'em up! Here's mine: 255/70 up front and behind, stock suspension with coils in the back. Painted the insides black with that plastidip crap. Wheels are 15x8.5 if I recall correctly. Attached Images

05-05-2013, 05:09 PM	#625
cabman420 Registered User Join Date: Mar 2013 Location: Pawtucket RI Posts: 29	Re: Whose on Steelies? Post 'em up! Here's mine!! Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.