What did you do to your truck today! - Page 251 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Gmcfolife · 03-10-2013, 11:01 PM

Posted via Mobile Device

Gmcfolife · 03-10-2013, 11:04 PM

Built a cart for my cab and bed.
Posted via Mobile Device

Gmcfolife · 03-10-2013, 11:10 PM

Sorry not sure how to post more than 1 pic at a time.
Posted via Mobile Device
Posted via Mobile Device

Stevo427 · 03-10-2013, 11:27 PM

Got my heater to work. This truck probably hasn't had the heater working in 20 years

. Never worked while I've owned it and it never worked for the PO. Pulled my glove box out and noticed that the controls where just unplugged. Plugged everything up and got a nice loud hum from the fan!. Woohoo!. Then I got some fittings for the intake/waterpump and hooked her all up and it turned out the heater core was busted. Ordered one from Oriellys and it was to big. Returned it and got one from Auto-zone. Then while I was screwing it on the core got punctured by the screws that hold it in place!

So took that back and got another one. Then after grinding the mounting screws down I put her back together and I now have HEAT! Did all this without having to drop the fender or wheel well(Skinny hands/arms and a lot of patience)......... But I did leave 2 bolts off so I can easily take it off again later.

Then after seeing this I got a vacuum and sucked out all the leaves out of the cab/vents.

Now when the weathers like this I can be nice and cozy!

clb1024 · 03-10-2013, 11:35 PM

I fixed a hood that wouldn't shut, and they don't look half bad!
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

clb1024 · 03-10-2013, 11:36 PM

Posted via Mobile Device

jc70chevy · 03-10-2013, 11:36 PM

Installed my cpp 2.5 drop spindles so now i have a total 5.5 inch drop in front and seven in the rear cant be happier hope the bbc dont drop it to much more. Lol

Gmcfolife · 03-10-2013, 11:55 PM

Quote:

Originally Posted by jc70chevy

Installed my cpp 2.5 drop spindles so now i have a total 5.5 inch drop in front and seven in the rear cant be happier hope the bbc dont drop it to much more. Lol

Got pics?
Posted via Mobile Device

shawno72 · 03-10-2013, 11:59 PM

Quote:

Originally Posted by jc70chevy

Installed my cpp 2.5 drop spindles so now i have a total 5.5 inch drop in front and seven in the rear cant be happier hope the bbc dont drop it to much more. Lol

Oh know that it will

Lets see some pics of the progress.

jc70chevy · 03-11-2013, 12:33 AM

ill post pics in the am tommorow to dark to night keep in mind with out motor

jc70chevy · 03-11-2013, 12:47 AM

dealt with insurance about my dog chewing up my bike and finished dropping truck so heres some pics front has 3 inch drop springs from cpp ad 2.5 spindles from cpp also. rear has 5 inch springs and two inchs blocks . front should 5.5 drop and rear a 7drop

jc70chevy · 03-11-2013, 12:50 AM

other side

shawno72 · 03-11-2013, 09:01 AM

I think its gonna drop quite a bit with the big block

Expat_dude · 03-12-2013, 10:48 PM

Paint going on

Posted via Mobile Device

jc70chevy · 03-12-2013, 10:52 PM

Quote:

Originally Posted by Expat_dude

Paint going on

Posted via Mobile Device

thats a nice color one of my favorites

Expat_dude · 03-12-2013, 11:32 PM

Gotta love tangier orange, we added a touch of HOK fire ice in the first layers of clear..
Posted via Mobile Device

PAWS 72 · 03-12-2013, 11:40 PM

Sunday, I was going to change trim rings and decided I would run it like this for a few days.

It would look good dropped about 2'' front and rear.

ryanroo · 03-12-2013, 11:52 PM

I think that looks sweet!

TexasSteve · 03-13-2013, 12:01 AM

I installed a Volante CAI today. And scribed off a piece of clear Lexan to redo the top from the Volante piece into a clear window, just for kicks. I had the piece of Lexan laying around so I figured why not?

Next up? Exhaust!

Last week was a new single DIN CD deck withe the adapter mount that has a small pocket underneath the deck so it doesn't just look like a "wrong-sized" stereo floating there in a flat piece of plastic.

VWNate1 · 03-13-2013, 08:17 AM

Electrolytic De Rusting .

I'd hoped the poster of this would flesh it out a bit , what is the solution mix ,anoeds and so on......

I'd like to try this .

TIA ,

cantcode86 · 03-13-2013, 10:46 AM

Nate, Google it. You can find all kinds of videos and write ups. I remember see something on this before but never saw any real results till now. I was looking to see if that person would come back with some tips but who knows. It doesn't look like a great process but I definitely could find some uses for it.

mud.man.rj · 03-13-2013, 12:01 PM

Well Paws72, I think it looks a bit sinister the way it sits now, without the trim rings.

Square_78 · 03-13-2013, 05:54 PM

Quote:

Originally Posted by PAWS 72

Sunday, I was going to change trim rings and decided I would run it like this for a few days.

It would look good dropped about 2'' front and rear.

Thats got a mean Nascar look to it with the big lettering on the tires. I think a 6" drop would look sweet.

Square_78 · 03-13-2013, 05:55 PM

new Fel pro one piece oil pan gasket installed today. hopefully no more leaks. It was a gusher before with the old worn out cork gasket that was in there.

Mayo · 03-13-2013, 09:16 PM

On Sunday I primed and painted the backside of my new front bumper

03-10-2013, 11:01 PM	#6251
Gmcfolife Registered User Join Date: Dec 2012 Location: Santee,CA Posts: 182	Re: What did you do to your truck today! Posted via Mobile Device

03-10-2013, 11:04 PM	#6252
Gmcfolife Registered User Join Date: Dec 2012 Location: Santee,CA Posts: 182	Re: What did you do to your truck today! Built a cart for my cab and bed. Posted via Mobile Device Attached Images

03-10-2013, 11:10 PM	#6253
Gmcfolife Registered User Join Date: Dec 2012 Location: Santee,CA Posts: 182	Re: What did you do to your truck today! Sorry not sure how to post more than 1 pic at a time. Posted via Mobile Device Posted via Mobile Device Attached Images

03-10-2013, 11:27 PM	#6254
Stevo427 Registered User Join Date: Sep 2011 Location: United States Posts: 163	Re: What did you do to your truck today! Got my heater to work. This truck probably hasn't had the heater working in 20 years . Never worked while I've owned it and it never worked for the PO. Pulled my glove box out and noticed that the controls where just unplugged. Plugged everything up and got a nice loud hum from the fan!. Woohoo!. Then I got some fittings for the intake/waterpump and hooked her all up and it turned out the heater core was busted. Ordered one from Oriellys and it was to big. Returned it and got one from Auto-zone. Then while I was screwing it on the core got punctured by the screws that hold it in place! So took that back and got another one. Then after grinding the mounting screws down I put her back together and I now have HEAT! Did all this without having to drop the fender or wheel well(Skinny hands/arms and a lot of patience)......... But I did leave 2 bolts off so I can easily take it off again later. Then after seeing this I got a vacuum and sucked out all the leaves out of the cab/vents. Now when the weathers like this I can be nice and cozy!

03-10-2013, 11:35 PM	#6255
clb1024 Registered User Join Date: Mar 2012 Location: Middleburg, FL Posts: 210	Re: What did you do to your truck today! I fixed a hood that wouldn't shut, and they don't look half bad! Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device Attached Images __________________ Favorite quote: "I'm sick and tired of being sick and tired B¡±@h!" - Drunk guy in one of my accounts Rides: 67 Chevy C10 LWB Stake Bed(in bad shape) 04 Miti Endeavor AWD(wife's ride) 76 Dodge D100 Club Cab(Hand-me down from my Grandfather)

03-10-2013, 11:36 PM	#6256
clb1024 Registered User Join Date: Mar 2012 Location: Middleburg, FL Posts: 210	Re: What did you do to your truck today! Posted via Mobile Device Attached Images __________________ Favorite quote: "I'm sick and tired of being sick and tired B¡±@h!" - Drunk guy in one of my accounts Rides: 67 Chevy C10 LWB Stake Bed(in bad shape) 04 Miti Endeavor AWD(wife's ride) 76 Dodge D100 Club Cab(Hand-me down from my Grandfather)

03-10-2013, 11:36 PM	#6257
jc70chevy Registered User Join Date: Jul 2012 Location: vallejo,ca Posts: 176	Re: What did you do to your truck today! Installed my cpp 2.5 drop spindles so now i have a total 5.5 inch drop in front and seven in the rear cant be happier hope the bbc dont drop it to much more. Lol

03-11-2013, 12:33 AM	#6260
jc70chevy Registered User Join Date: Jul 2012 Location: vallejo,ca Posts: 176	Re: What did you do to your truck today! ill post pics in the am tommorow to dark to night keep in mind with out motor

03-11-2013, 12:47 AM	#6261
jc70chevy Registered User Join Date: Jul 2012 Location: vallejo,ca Posts: 176	Re: What did you do to your truck today! dealt with insurance about my dog chewing up my bike and finished dropping truck so heres some pics front has 3 inch drop springs from cpp ad 2.5 spindles from cpp also. rear has 5 inch springs and two inchs blocks . front should 5.5 drop and rear a 7drop Attached Images Last edited by jc70chevy; 03-11-2013 at 12:49 AM. Reason: more typing lol

03-11-2013, 12:50 AM	#6262
jc70chevy Registered User Join Date: Jul 2012 Location: vallejo,ca Posts: 176	Re: What did you do to your truck today! other side Attached Images

03-11-2013, 09:01 AM	#6263
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: What did you do to your truck today! I think its gonna drop quite a bit with the big block __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-12-2013, 10:48 PM	#6264
Expat_dude Registered User Join Date: Jul 2012 Location: Brookhaven, Ms/ Sakhalin Russia Posts: 370	Re: What did you do to your truck today! Paint going on Posted via Mobile Device __________________ 1970 Chevy swb, project UGHH! 1987 Grand National http://s168.photobucket.com/albums/u.../1970%20Chevy/

03-12-2013, 11:32 PM	#6266
Expat_dude Registered User Join Date: Jul 2012 Location: Brookhaven, Ms/ Sakhalin Russia Posts: 370	Re: What did you do to your truck today! Gotta love tangier orange, we added a touch of HOK fire ice in the first layers of clear.. Posted via Mobile Device __________________ 1970 Chevy swb, project UGHH! 1987 Grand National http://s168.photobucket.com/albums/u.../1970%20Chevy/

03-12-2013, 11:40 PM	#6267
PAWS 72 Registered User Join Date: Nov 2011 Location: Sheffield, ALA Posts: 2,471	Re: What did you do to your truck today! Sunday, I was going to change trim rings and decided I would run it like this for a few days. It would look good dropped about 2'' front and rear. Attached Images

03-12-2013, 11:52 PM	#6268
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: What did you do to your truck today! I think that looks sweet! __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions



Register or Log In To remove these advertisements.

03-13-2013, 12:01 AM	#6269
TexasSteve Registered User Join Date: Feb 2013 Location: Bertram, TX Posts: 103	Re: What did you do to your truck today! I installed a Volante CAI today. And scribed off a piece of clear Lexan to redo the top from the Volante piece into a clear window, just for kicks. I had the piece of Lexan laying around so I figured why not? Next up? Exhaust! Last week was a new single DIN CD deck withe the adapter mount that has a small pocket underneath the deck so it doesn't just look like a "wrong-sized" stereo floating there in a flat piece of plastic. __________________ 2001 Yukon Factory Grey Metallic~2" DJM Key front drop/3" DJM Rear Springs~stock 16" chrome steel wheels~5.3/4L60E~Volante CAI w/under bumper air scoop~Magnaflow 10426 Bullet muffler~DDM LED all exterior lighting/55w-5000k HID Hi/Low/35w Fog

03-13-2013, 08:17 AM	#6270
VWNate1 Registered User Join Date: Feb 2012 Location: So. Cali. Posts: 2,664	Re: What did you do to your truck today! Electrolytic De Rusting . I'd hoped the poster of this would flesh it out a bit , what is the solution mix ,anoeds and so on...... I'd like to try this . TIA , __________________ -Nate Geezer '49 3100 235 W/ Muncie SM420 SOLD '69 C/10 shortbed sidemount survivor 250 L6 W/ 350TH

03-13-2013, 10:46 AM	#6271
cantcode86 Registered User Join Date: Aug 2009 Location: Goose Creek SC Posts: 20	Re: What did you do to your truck today! Nate, Google it. You can find all kinds of videos and write ups. I remember see something on this before but never saw any real results till now. I was looking to see if that person would come back with some tips but who knows. It doesn't look like a great process but I definitely could find some uses for it. __________________ 72 C10 stock for now

03-13-2013, 12:01 PM	#6272
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: What did you do to your truck today! Well Paws72, I think it looks a bit sinister the way it sits now, without the trim rings.

03-13-2013, 05:55 PM	#6274
Square_78 Registered User Join Date: Mar 2012 Location: Okanagan Valley, BC, Canada Posts: 1,237	Re: What did you do to your truck today! new Fel pro one piece oil pan gasket installed today. hopefully no more leaks. It was a gusher before with the old worn out cork gasket that was in there. __________________ #teamlongbed "I refuse to go disc brakes. I actually love drum brakes. It makes for an adventure." - 50bomb 1978 Chevy shop truck - static 6/8" 1970 GMC 1500 - Accuair eLevel Resto-mod http://67-72chevytrucks.com/vboard/s...d.php?t=537497

03-13-2013, 09:16 PM	#6275
Mayo Cool Truck Join Date: Dec 2008 Location: Bowie,MD Posts: 1,869	Re: What did you do to your truck today! On Sunday I primed and painted the backside of my new front bumper __________________ 1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed

Register or Log In To remove these advertisements.