What did you do to your truck today? - Page 258 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RANDY COX · 03-17-2013, 09:55 PM

Ordered my rockers and patch panels,,OOOOH YA BABY....

markeb01 · 03-17-2013, 10:05 PM

Spent the afternoon replacing the stainless hex bolts in my rear splash pans with black carriage bolts.

MrBeast · 03-18-2013, 12:49 AM

Built a receiver mount for my winch and a bracket to put it on my trailer.

Gonna go get my 72 from where I have it stored next month, needed this to get it on the trailer.

keeks69 · 03-22-2013, 01:39 PM

Finished this today
looks pretty good just waiting for the new clear glass part!

dantimdad · 03-23-2013, 08:54 PM

Cleaned the shop and decided to remove the inner portion of the hood to sand blast it and rust proof. Plus, it'll make welding in the patch panel easier.

Steven

racecougar · 03-23-2013, 09:07 PM

I cut a hole in it.

Then spent awhile fitting up the new panel. If I make it over to the shop tomorrow, I'll start welding it in.

jbgroby · 03-23-2013, 10:04 PM

You make it look so easy.

CRGRS 66 · 03-23-2013, 10:29 PM

Spent about 1.5 hours with the wire wheel on the firewall, rest of the day sand blasting parts.

wutnxt · 03-24-2013, 04:49 PM

I managed to purchase a altenator for the 6.2 LSA supercharger set up for the 66 project low and go.....But i can't seem to purchase the bracket I need from ebay ......apparently I am a international customer and they don't roll that way....

towersddg9 · 03-24-2013, 05:57 PM

did the driver side glass and vent window, it was actually an easy job, (thanks to some help from members here) I bought the door glass off ebay it fit great, so did the new vent window (classic parts)

198plus · 03-24-2013, 08:49 PM

Quote:

Originally Posted by towersddg9

did the driver side glass and vent window, it was actually an easy job, (thanks to some help from members here) I bought the door glass off ebay it fit great, so did the new vent window (classic parts)

Looks nice, is that a new vent window.

towersddg9 · 03-25-2013, 03:43 PM

Quote:

Originally Posted by 198plus

Looks nice, is that a new vent window.

Thanks 198, looking forward to seeing your truck finished, those vent windows are new got em from Classic Parts, I was sweating the fitment as I've read here somewhere that some have had issues, these went right in and fit great

Thanks again for the feedback
Posted via Mobile Device

padresag · 03-24-2013, 07:44 PM

Quote:

Originally Posted by wutnxt

I managed to purchase a altenator for the 6.2 LSA supercharger set up for the 66 project low and go.....But i can't seem to purchase the bracket I need from ebay ......apparently I am a international customer and they don't roll that way....

if you have a US shipping address you get around that. over here we use an outfit called Seawings express international. they have a Blaine address and they bring stuff over daily $17.00 brings over 5lbs. pick it up at Victoria airport, whisk it through customs and your gone. there must be someone doing that at Abbotsford,a/port. US shipping to Blaine is usually minimal so in the end it doesn't make much difference and you don't have to pay those courier ripoff brokers fees.
ron

awbrown · 03-24-2013, 08:58 PM

Took it out for a drive ! First drive of the spring !!!

T Smith · 03-24-2013, 09:20 PM

Got the rear done last week, worked on the front this weekend..

forestb · 03-25-2013, 04:36 PM

Quote:

Originally Posted by T Smith

Got the rear done last week, worked on the front this weekend..

I don't mean to high jack the thread but how do the bottom of the bags attach to the lower control arms or do they just sit in the pockets?

T Smith · 03-25-2013, 07:40 PM

Quote:

Originally Posted by forestb

I don't mean to high jack the thread but how do the bottom of the bags attach to the lower control arms or do they just sit in the pockets?

The bottom of the bag bolts to a cup that just sits in the spring pocket.

markeb01 · 03-25-2013, 04:28 PM

Thanks for sharing that they fit well. I'd like to add those to my truck someday, along with the chrome frames on the side glass. I think they'd upgrade the cab every bit as much as the stainless windshield trim.

luvbowties · 04-09-2013, 09:04 AM

Quote:

Originally Posted by markeb01

Thanks for sharing that they fit well. I'd like to add those to my truck someday, along with the chrome frames on the side glass. I think they'd upgrade the cab every bit as much as the stainless windshield trim.

Mark, hope you don't have to do like me: apply for an FHA loan

to purchase a pair! Of all parts for our trucks, the price of vent-windows has blown my mind about as much as any thing I easily recall. I ended up buying a fairly nice pair on Ebay--including good glass and chrome--and re-building them. Luckily, they made a very nice 'driver-quality-plus' set. Even lucked up later & sold my originals to a guy whose set was much worse than mine.
sam

dantimdad · 03-25-2013, 07:17 PM

My script valve covers arrived from Don today!

Woohoo!

They look great.

Now, to mod them for a PCV valve and a baffle and then repaint.

Steven

Ta2Don · 03-25-2013, 07:20 PM

Glad you like them, but, what no pics? LOL
Posted via Mobile Device

dantimdad · 03-25-2013, 07:55 PM

Sorry, Don, here is a pic:

Daniel is chomping at the bit to paint the scripts black.

Thanks again!

Steven

Ta2Don · 03-25-2013, 10:34 PM

Quote:

Originally Posted by dantimdad

Sorry, Don, here is a pic:

Daniel is chomping at the bit to paint the scripts black.

Thanks again!

Steven

Looking Good! The black script will look sweet!

steve'62 · 03-25-2013, 10:25 PM

Posted via Mobile Device

steve'62 · 03-25-2013, 10:29 PM

Started on the cpp disc brake and drop spindle! The old spindle removal was a huge PITA.
Posted via Mobile Device
Posted via Mobile Device

03-17-2013, 09:55 PM	#1
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: What did you do to your truck today? Ordered my rockers and patch panels,,OOOOH YA BABY.... __________________ 1964 BBC 402 4x4

03-17-2013, 10:05 PM	#2
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: What did you do to your truck today? Spent the afternoon replacing the stainless hex bolts in my rear splash pans with black carriage bolts. __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502

03-18-2013, 12:49 AM	#3
MrBeast high-Tech Red Neck Join Date: Feb 2008 Location: Livingston, MT/On my boat WA/BC/AK Posts: 2,294	Re: What did you do to your truck today? Built a receiver mount for my winch and a bracket to put it on my trailer. Gonna go get my 72 from where I have it stored next month, needed this to get it on the trailer. __________________ "He used to be a pretty nice feller, now he's a welder!"

03-22-2013, 01:39 PM	#4
keeks69 Registered User Join Date: Feb 2013 Location: Port Huron Michigan Posts: 37	Re: What did you do to your truck today? Finished this today looks pretty good just waiting for the new clear glass part! Attached Images

03-23-2013, 08:54 PM	#5
dantimdad Registered User Join Date: Feb 2010 Location: Hartselle, Al. Posts: 466	Re: What did you do to your truck today? Cleaned the shop and decided to remove the inner portion of the hood to sand blast it and rust proof. Plus, it'll make welding in the patch panel easier. Steven __________________ “Life is and will ever remain an equation incapable of solution, but it contains certain known factors.” - Nikola Tesla Matt. 6:27 "Who of you by worrying can add a single hour to his life?” http://www.67-72chevytrucks.com/vboa...=507266&page=2

03-23-2013, 09:07 PM	#6
racecougar Registered User Join Date: Jan 2013 Location: Imperial, MO Posts: 999	Re: What did you do to your truck today? I cut a hole in it. Then spent awhile fitting up the new panel. If I make it over to the shop tomorrow, I'll start welding it in. __________________ Rod @ AzzKicker Cars 1965 C10 SWB - Build Thread

03-23-2013, 10:04 PM	#7
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,770	Re: What did you do to your truck today? You make it look so easy. __________________ http://s1299.photobucket.com/user/jb...23904108567829

03-23-2013, 10:29 PM	#8
CRGRS 66 Registered User Join Date: Apr 2012 Location: Cambridge, Ontario, Canada Posts: 1,771	Re: What did you do to your truck today? Spent about 1.5 hours with the wire wheel on the firewall, rest of the day sand blasting parts. __________________ Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709

03-24-2013, 04:49 PM	#9
wutnxt Registered User Join Date: Dec 2009 Location: vancouver b.c....is the biggest place most people would know but I am actually out in the valley 45 mins away Posts: 2,050	Re: What did you do to your truck today? I managed to purchase a altenator for the 6.2 LSA supercharger set up for the 66 project low and go.....But i can't seem to purchase the bracket I need from ebay ......apparently I am a international customer and they don't roll that way.... __________________ 1966 Pro street build http://67-72chevytrucks.com/vboard/s...?t=448089[ 1958 LS 2 build http://67-72chevytrucks.com/vboard/s...d.php?t=527123 1966 SBFS low and go http://67-72chevytrucks.com/vboard/s....php?p=5799909 1966 SBFS street HULK http://67-72chevytrucks.com/vboard/s...=1#post5886625 Poject Low and go gets a 6.2 ltr LSA supercharged with 6 speed automatic Aluinum Radiator Dealer pm for details

03-24-2013, 05:57 PM	#10
towersddg9 Registered User Join Date: Dec 2010 Location: Texas Posts: 246	Re: What did you do to your truck today? did the driver side glass and vent window, it was actually an easy job, (thanks to some help from members here) I bought the door glass off ebay it fit great, so did the new vent window (classic parts) Attached Images

03-24-2013, 08:58 PM	#14
awbrown Registered User Join Date: Aug 2009 Location: Detroit MI Posts: 1,209	Re: What did you do to your truck today? Took it out for a drive ! First drive of the spring !!!

03-24-2013, 09:20 PM	#15
T Smith Registered User Join Date: Jan 2011 Location: Vicksburg, Mississippi Posts: 567	Re: What did you do to your truck today? Got the rear done last week, worked on the front this weekend..

03-25-2013, 04:28 PM	#18
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: What did you do to your truck today? Thanks for sharing that they fit well. I'd like to add those to my truck someday, along with the chrome frames on the side glass. I think they'd upgrade the cab every bit as much as the stainless windshield trim. __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502

03-25-2013, 07:17 PM	#20
dantimdad Registered User Join Date: Feb 2010 Location: Hartselle, Al. Posts: 466	Re: What did you do to your truck today? My script valve covers arrived from Don today! Woohoo! They look great. Now, to mod them for a PCV valve and a baffle and then repaint. Steven __________________ “Life is and will ever remain an equation incapable of solution, but it contains certain known factors.” - Nikola Tesla Matt. 6:27 "Who of you by worrying can add a single hour to his life?” http://www.67-72chevytrucks.com/vboa...=507266&page=2

03-25-2013, 07:20 PM	#21
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: What did you do to your truck today? Glad you like them, but, what no pics? LOL Posted via Mobile Device __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD



Register or Log In To remove these advertisements.

03-25-2013, 07:55 PM	#22
dantimdad Registered User Join Date: Feb 2010 Location: Hartselle, Al. Posts: 466	Re: What did you do to your truck today? Sorry, Don, here is a pic: Daniel is chomping at the bit to paint the scripts black. Thanks again! Steven __________________ “Life is and will ever remain an equation incapable of solution, but it contains certain known factors.” - Nikola Tesla Matt. 6:27 "Who of you by worrying can add a single hour to his life?” http://www.67-72chevytrucks.com/vboa...=507266&page=2

03-25-2013, 10:25 PM	#24
steve'62 Registered User Join Date: Feb 2011 Location: Goodyear,az Posts: 251	Re: What did you do to your truck today? Posted via Mobile Device

03-25-2013, 10:29 PM	#25
steve'62 Registered User Join Date: Feb 2011 Location: Goodyear,az Posts: 251	Re: What did you do to your truck today? Started on the cpp disc brake and drop spindle! The old spindle removal was a huge PITA. Posted via Mobile Device Posted via Mobile Device Attached Images

Register or Log In To remove these advertisements.