1965/73 Cheap Build Up - Page 26 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jason65 · 08-18-2009, 07:46 AM

Quote:

Originally Posted by daverod

I think it needs to run to the back of the cab then blend in.

I agree ^^^^^.

Strodder · 08-18-2009, 10:14 AM

Quote:

Originally Posted by watahyahknow

maibe try to get the driprail to end in the low corner of the spoiler thingy en blend it in from there .
from wat i see now rounding the rear corner of the door would be futile too the front of the spoilerthingy goes straight intoo the rear gap of the door .
maibe you need to iliminate the spoiler thingy in total cut it of the roof and replace it with a front part from another 65 truck turned around , that gets a smoot roof all the way to the back and you get a piece of driprail all around , you prolly need to put some metal under it to close the gap to the rearwindow

looked at the picture again are you in for some fabricating ? use a front windshield in the back too

That's the next thing I was going to try. Bring it all the way to the back, and blend it in. The other idea you have sounds good, but I have so much more I want to do to the truck. Besides I wouldn't change the basic look of the roof. I like that bump, and the way the roof over hang's.

Strodder · 08-18-2009, 02:42 PM

Here is is. Back to my original idea.

That's it!! This is the final. No more screwing around. I like it.

Strodder · 08-18-2009, 02:44 PM

I have to weld up the bottom of the rail to make it match the front part. Then a final skim coat.

daverod · 08-18-2009, 02:51 PM

Looks good.

Sure you don't want to mess with it some more.

MacAttack · 08-18-2009, 03:12 PM

Quote:

Originally Posted by daverod

Sure you don't want to mess with it some more?

Thanks for your totally unsolicited input.

Strodder · 08-18-2009, 03:15 PM

Quote:

Originally Posted by daverod

Looks good.

Sure you don't want to mess with it some more.

:

Strodder · 08-18-2009, 03:18 PM

I forgot to mention that I used part of the A pillar to form the new drip rail that I just made.

daverod · 08-18-2009, 04:05 PM

Quote:

Originally Posted by MacAttack

Thanks for your totally unsolicited input.

Any time

shrunken66stroker · 08-18-2009, 04:20 PM

I might have to jack that idea from you Dennis. Holy sheite. That looks great. You do nice work, I don't care what these other monkeys say about you.

aggie91 · 08-18-2009, 04:33 PM

Quote:

Originally Posted by Strodder

Also taking off the A pillar was a great idea. It was rusting underneath it. Even if i was keeping it I would take it off to clean the rust, and treat it, and paint it . It is only spot welded on, and came off real easy with a chizzle.

thats what mine looked like when I removed them. I still have not decided what to do about the drip rail...

daverod · 08-18-2009, 04:35 PM

Who you callin a monkey. I'm a chimpanzee Damit.

He does do nice work though.

MacAttack · 08-18-2009, 04:37 PM

Quote:

Originally Posted by shrunken66stroker

You do nice work, I don't care what these other monkeys say about you.

That's Great Ape, Sir - Not Monkey.

Mac.

daverod · 08-18-2009, 04:42 PM

Getting a little slow on the draw arn't you.

MacAttack · 08-18-2009, 04:44 PM

Quote:

Originally Posted by daverod

Getting a little slow on the draw arn't you.

Real style (and correct spelling) take time.

daverod · 08-18-2009, 04:50 PM

Quote:

Originally Posted by MacAttack

Real style (and correct spelling) take time.

Hay its Strodder's plyace anthing go's .

Where is that guy anyway? I got somthing for him.

MacAttack · 08-18-2009, 04:54 PM

Thanks. Now I tasting my lunch all over again........

daverod · 08-18-2009, 04:55 PM

Mission complete.

daverod · 08-18-2009, 04:56 PM

Strodder going to be excited when he gets home.

MacAttack · 08-18-2009, 04:57 PM

Quote:

Originally Posted by daverod

Mission complete.

shrunken66stroker · 08-18-2009, 05:20 PM

Too much monkey business for me to get involved in. I'm going out to shave my drip rails.

daverod · 08-18-2009, 05:24 PM

Thats a monkey.

watahyahknow · 08-19-2009, 04:32 AM

jason65 · 08-19-2009, 07:42 AM

You got a winner that time Dennis. Nice job.

Strodder · 08-19-2009, 09:25 AM

Thanks you guys. Your cracking me up. I 'm busy for one night, and I get Jacked.

08-18-2009, 02:42 PM	#628
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 1965/73 Cheap Build Up Here is is. Back to my original idea. That's it!! This is the final. No more screwing around. I like it. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

08-18-2009, 02:44 PM	#629
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 1965/73 Cheap Build Up I have to weld up the bottom of the rail to make it match the front part. Then a final skim coat. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

08-18-2009, 02:51 PM	#630
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: 1965/73 Cheap Build Up Looks good. Sure you don't want to mess with it some more. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

08-18-2009, 03:18 PM	#633
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 1965/73 Cheap Build Up I forgot to mention that I used part of the A pillar to form the new drip rail that I just made. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

08-18-2009, 04:20 PM	#635
shrunken66stroker Registered User Join Date: Jan 2008 Location: Las Vegas, Nv Posts: 954	Re: 1965/73 Cheap Build Up I might have to jack that idea from you Dennis. Holy sheite. That looks great. You do nice work, I don't care what these other monkeys say about you. __________________ http://67-72chevytrucks.com/vboard/s...54#post3194654

08-18-2009, 04:35 PM	#637
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: 1965/73 Cheap Build Up Who you callin a monkey. I'm a chimpanzee Damit. He does do nice work though. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

08-18-2009, 04:42 PM	#639
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: 1965/73 Cheap Build Up Getting a little slow on the draw arn't you. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

08-18-2009, 04:54 PM	#642
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: 1965/73 Cheap Build Up Thanks. Now I tasting my lunch all over again........ __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

08-18-2009, 04:55 PM	#643
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: 1965/73 Cheap Build Up Mission complete. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

08-18-2009, 04:56 PM	#644
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: 1965/73 Cheap Build Up Strodder going to be excited when he gets home. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 08-18-2009 at 05:00 PM.

08-18-2009, 05:20 PM	#646
shrunken66stroker Registered User Join Date: Jan 2008 Location: Las Vegas, Nv Posts: 954	Re: 1965/73 Cheap Build Up Too much monkey business for me to get involved in. I'm going out to shave my drip rails. __________________ http://67-72chevytrucks.com/vboard/s...54#post3194654

08-18-2009, 05:24 PM	#647
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: 1965/73 Cheap Build Up Thats a monkey. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 08-18-2009 at 05:24 PM.

08-19-2009, 04:32 AM	#648
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: 1965/73 Cheap Build Up __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

08-19-2009, 07:42 AM	#649
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: 1965/73 Cheap Build Up You got a winner that time Dennis. Nice job.

08-19-2009, 09:25 AM	#650
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 1965/73 Cheap Build Up Thanks you guys. Your cracking me up. I 'm busy for one night, and I get Jacked. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT* Last edited by Strodder; 08-19-2009 at 09:26 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.