OR 100's of misc parts from the last 6 trucks parted out - Page 26 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72K5er · 01-04-2014, 10:24 AM

Yes, that's exactly what I am looking for. Would you also happen to have a factory tie rod? I don't need ends, just the main rod. I would like to use Paypal. Thanks

**tll74** · 01-04-2014, 03:00 PM

Quote:

Originally Posted by 72K5er

Yes, that's exactly what I am looking for. Would you also happen to have a factory tie rod? I don't need ends, just the main rod. I would like to use Paypal. Thanks

I might have the tie rod. I just put a 72 K20 in the shop to tear down but it will be monday before I can check. Paypal is fine as long as it is sent as "friend" or cover the fees.
Thanks, Tom

**FRENCHBLUE72** · 01-04-2014, 05:04 PM

I could use one wiper arm with blade if you have any left?

72K5er · 01-04-2014, 09:29 PM

Sounds good. What is the email I send the paypal to. No prob on sending it to a friend to avoid fees. Should I just wait till Monday and pay for it all at once?

NavyChief · 01-04-2014, 09:42 PM

I need an intake for a 1969 250 6cyl.

**tll74** · 01-06-2014, 02:30 AM

Quote:

Originally Posted by FRENCHBLUE72

I could use one wiper arm with blade if you have any left?

Sure no problem. I have several of them in nice condition. 20.00 shipped

Quote:

Originally Posted by 72K5er

Sounds good. What is the email I send the paypal to. No prob on sending it to a friend to avoid fees. Should I just wait till Monday and pay for it all at once?

Yea I'll let you know tomorrow Monday.

Quote:

Originally Posted by NavyChief

I need an intake for a 1969 250 6cyl.

I'll look I just might have one.

Thanks, Tom

diver · 01-06-2014, 12:08 PM

looking to buy stepside short bed fender tire carrier or who will have one 60-72 thanks

1971 cheburban · 01-06-2014, 01:12 PM

Interested in the lower a-arms and maybe the uppers to, will they fit a 1971 c10? How much and can you ship them to ohio, thanks

**tll74** · 01-07-2014, 03:24 AM

Quote:

Originally Posted by 72K5er

Sounds good. What is the email I send the paypal to. No prob on sending it to a friend to avoid fees. Should I just wait till Monday and pay for it all at once?

I checked and do have the tie rod. It needs ends but the tube is nice. 50.00 plus shipping. Send me your zip and I'll get a shipping cost as it would ship separate and want to be sure of cost due to the length.

Quote:

Originally Posted by diver

looking to buy stepside short bed fender tire carrier or who will have one 60-72 thanks

Butch, I don't have one. I'll keep a eye out for you though.

Quote:

Originally Posted by 1971 cheburban

Interested in the lower a-arms and maybe the uppers to, will they fit a 1971 c10? How much and can you ship them to ohio, thanks

I answered this in the other thread except for shipping. I'll do that Tuesday.

Thanks, Tom

72K5er · 01-07-2014, 12:48 PM

My zip is 21156. That's perfect, I plan on replacing the ends anyway. Does the rod have the clamps that tighten down the ends, I hope. Thanks again.

**tll74** · 01-07-2014, 09:12 PM

Quote:

Originally Posted by 72K5er

My zip is 21156. That's perfect, I plan on replacing the ends anyway. Does the rod have the clamps that tighten down the ends, I hope. Thanks again.

Shipping is 39.08. It does have the ends with clamps. Thanks, Tom

72K5er · 01-07-2014, 09:24 PM

Sounds good, what email should I send it to? I will try to get the money sent tonight, tomorrow morning the latest. Thanks again

rusted72' · 01-10-2014, 10:27 PM

Tom-
I recieved the spare tire holder..looks better than I expected ,thanks

**tll74** · 01-11-2014, 01:38 AM

Quote:

Originally Posted by rusted72'

Tom-
I recieved the spare tire holder..looks better than I expected ,thanks

Glad you like it!! Thanks, Tom

rusted72' · 05-29-2014, 01:37 PM

Tom-
wondering if you have or know of someone who would happen to have a rear cross sill for a wood bed?
any help on this would be amazing.

thanks

pkz71 · 05-29-2014, 03:40 PM

I realize your original post is quite old but I'm interested in one black original equipment (not reproduction) 1970 armrest. Your picture #1 description says that you have 3 1970 armrests in olive. They appear black in the picture so I thought I'd ask. If they are black I'm interested in one if its in excellent condition.

**tll74** · 05-30-2014, 01:25 AM

Quote:

Originally Posted by rusted72'

Tom-
wondering if you have or know of someone who would happen to have a rear cross sill for a wood bed?
any help on this would be amazing.

thanks

I have one in a 69. Not sure how good it is but I'll look for you.

Quote:

Originally Posted by pkz71

I realize your original post is quite old but I'm interested in one black original equipment (not reproduction) 1970 armrest. Your picture #1 description says that you have 3 1970 armrests in olive. They appear black in the picture so I thought I'd ask. If they are black I'm interested in one if its in excellent condition.

I have some nice black ones. 20.00 each plus shipping.

Thanks, Tom

69Rumbler · 05-30-2014, 01:34 AM

Hello do you happen to have the visors in the 1st page on the top left .. Aqua ish ones left if so how much shipped to 91731

pkz71 · 05-30-2014, 08:41 PM

Quote:

Originally Posted by tll74

I have one in a 69. Not sure how good it is but I'll look for you.

I have some nice black ones. 20.00 each plus shipping.

Thanks, Tom

Sounds good. I just need one in black as long as its original equipment and not a reproduction. Please PM me with additional info.

Thanks,
Phil

JWSmith · 05-30-2014, 08:53 PM

I'm looking for headliner trim if you have any

rusted72' · 05-31-2014, 12:07 AM

Quote:

Originally Posted by tll74

I have one in a 69. Not sure how good it is but I'll look for you.

I have some nice black ones. 20.00 each plus shipping.

Thanks, Tom

OK...depending how good it is and as long as it fits a 72', i will take it.
keep me posted
thank you.

CATCHALLBLUE · 05-31-2014, 10:00 AM

greetings, im looking for rear brake lines. All of the line and connectors from the MC to the rear. Rust free and unclogged preferred.... thank you

**tll74** · 05-31-2014, 11:36 AM

Quote:

Originally Posted by 69Rumbler

Hello do you happen to have the visors in the 1st page on the top left .. Aqua ish ones left if so how much shipped to 91731

Probably but will have to check. It will be Monday/Tuesday before I can look.

Quote:

Originally Posted by pkz71

Sounds good. I just need one in black as long as its original equipment and not a reproduction. Please PM me with additional info.

Thanks,
Phil

Phil, Yes original GM. Pm on way

Quote:

Originally Posted by JWSmith

I'm looking for headliner trim if you have any

Sorry, have never removed any without breaking it.

Quote:

Originally Posted by rusted72'

OK...depending how good it is and as long as it fits a 72', i will take it.
keep me posted
thank you.

Sorry, the one I had in mind is rusted out. I have one in a Longhorn but it would be month or two before I get to it.

Quote:

Originally Posted by CATCHALLBLUE

greetings, im looking for rear brake lines. All of the line and connectors from the MC to the rear. Rust free and unclogged preferred.... thank you

Year, leaf or coil rear suspension, 2wd or 4wd, 1/2t or 3/4t, short or long wb, power or manual brakes?

diver · 05-31-2014, 03:27 PM

hi tom,wtb auto.trans.mount for my 1967 k-20. going from 4 speed to auto and tilt colum for k20. THANKS BUTCH zip 30141

CATCHALLBLUE · 05-31-2014, 03:35 PM

69 leaf spring 1 ton dually stake bed with power brakes

01-04-2014, 10:24 AM	#626
72K5er Registered User Join Date: May 2008 Location: Upper Falls, MD Posts: 170	Re: 100's of misc parts from the last 6 trucks parted out Yes, that's exactly what I am looking for. Would you also happen to have a factory tie rod? I don't need ends, just the main rod. I would like to use Paypal. Thanks Last edited by 72K5er; 01-04-2014 at 11:40 AM.

01-04-2014, 05:04 PM	#628
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,591	Re: 100's of misc parts from the last 6 trucks parted out I could use one wiper arm with blade if you have any left? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

01-04-2014, 09:29 PM	#629
72K5er Registered User Join Date: May 2008 Location: Upper Falls, MD Posts: 170	Re: 100's of misc parts from the last 6 trucks parted out Sounds good. What is the email I send the paypal to. No prob on sending it to a friend to avoid fees. Should I just wait till Monday and pay for it all at once?

01-04-2014, 09:42 PM	#630
NavyChief Registered User Join Date: May 2013 Location: Clarksville TN Posts: 79	Re: 100's of misc parts from the last 6 trucks parted out I need an intake for a 1969 250 6cyl. __________________ 1969 C10 Long Bed Step Side (My Texas Heirloom!) It is a work in progress!!!!!

01-06-2014, 12:08 PM	#632
diver Registered User Join Date: Nov 2013 Location: hiram,georgia Posts: 243	Re: 100's of misc parts from the last 6 trucks parted out looking to buy stepside short bed fender tire carrier or who will have one 60-72 thanks Last edited by diver; 01-06-2014 at 12:09 PM. Reason: forgot year

01-06-2014, 01:12 PM	#633
1971 cheburban Registered User Join Date: Jul 2013 Location: Wellsville,ohio Posts: 140	Re: 100's of misc parts from the last 6 trucks parted out Interested in the lower a-arms and maybe the uppers to, will they fit a 1971 c10? How much and can you ship them to ohio, thanks

01-07-2014, 12:48 PM	#635
72K5er Registered User Join Date: May 2008 Location: Upper Falls, MD Posts: 170	Re: 100's of misc parts from the last 6 trucks parted out My zip is 21156. That's perfect, I plan on replacing the ends anyway. Does the rod have the clamps that tighten down the ends, I hope. Thanks again.

01-07-2014, 09:24 PM	#637
72K5er Registered User Join Date: May 2008 Location: Upper Falls, MD Posts: 170	Re: 100's of misc parts from the last 6 trucks parted out Sounds good, what email should I send it to? I will try to get the money sent tonight, tomorrow morning the latest. Thanks again

01-10-2014, 10:27 PM	#638
rusted72' Registered User Join Date: Nov 2013 Location: Whittier, CA Posts: 120	Re: 100's of misc parts from the last 6 trucks parted out Tom- I recieved the spare tire holder..looks better than I expected ,thanks

05-29-2014, 01:37 PM	#640
rusted72' Registered User Join Date: Nov 2013 Location: Whittier, CA Posts: 120	Re: 100's of misc parts from the last 6 trucks parted out Tom- wondering if you have or know of someone who would happen to have a rear cross sill for a wood bed? any help on this would be amazing. thanks

05-29-2014, 03:40 PM	#641
pkz71 Registered User Join Date: Dec 2013 Location: Bothell, WA Posts: 30	Re: 100's of misc parts from the last 6 trucks parted out I realize your original post is quite old but I'm interested in one black original equipment (not reproduction) 1970 armrest. Your picture #1 description says that you have 3 1970 armrests in olive. They appear black in the picture so I thought I'd ask. If they are black I'm interested in one if its in excellent condition.

05-30-2014, 01:34 AM	#643
69Rumbler Registered User Join Date: Jan 2013 Location: Los Angeles Posts: 903	Re: 100's of misc parts from the last 6 trucks parted out Hello do you happen to have the visors in the 1st page on the top left .. Aqua ish ones left if so how much shipped to 91731 __________________ 1969 C20 CUSTOM "RUMBLEr"

05-30-2014, 08:53 PM	#645
JWSmith Registered User Join Date: May 2013 Location: Godfrey, IL Posts: 220	Re: 100's of misc parts from the last 6 trucks parted out I'm looking for headliner trim if you have any

05-31-2014, 10:00 AM	#647
CATCHALLBLUE Registered User Join Date: May 2014 Location: Catchall Posts: 120	Re: 100's of misc parts from the last 6 trucks parted out greetings, im looking for rear brake lines. All of the line and connectors from the MC to the rear. Rust free and unclogged preferred.... thank you

05-31-2014, 03:27 PM	#649
diver Registered User Join Date: Nov 2013 Location: hiram,georgia Posts: 243	Re: 100's of misc parts from the last 6 trucks parted out hi tom,wtb auto.trans.mount for my 1967 k-20. going from 4 speed to auto and tilt colum for k20. THANKS BUTCH zip 30141



Register or Log In To remove these advertisements.

05-31-2014, 03:35 PM	#650
CATCHALLBLUE Registered User Join Date: May 2014 Location: Catchall Posts: 120	Re: 100's of misc parts from the last 6 trucks parted out 69 leaf spring 1 ton dually stake bed with power brakes

Register or Log In To remove these advertisements.