My 52 GMC Build - Page 26 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Advanced Design** · 02-03-2016, 07:33 PM

Lower that was a nice mod. What wiper motor is that?

**Dieselwrencher** · 02-03-2016, 08:56 PM

Quote:

Originally Posted by lower50's

This morning I hooked up my 3 in one gauge (EGT, Trans temp, Boost). I also got my Transmission controller plugged in and mounted. The switch is for the 2 shifting programs I can have loaded.
Attachment 1494572

Attachment 1494573

Very nice! Your trans controller is pretty neat. Keep the boost below 20 so you can enjoy it for a long time!

99 to Life · 02-03-2016, 09:23 PM

making it look easy

lower50's · 02-03-2016, 09:45 PM

Quote:

Originally Posted by Advanced Design

Lower that was a nice mod. What wiper motor is that?

Thanks It's the rear wiper from a '97 s-10 blazer

Quote:

Originally Posted by Dieselwrencher

Very nice! Your trans controller is pretty neat. Keep the boost below 20 so you can enjoy it for a long time!

Thanks Diesel I'm going to run max 15psi.

Quote:

Originally Posted by 99 to Life

making it look easy

You know it's not

lower50's · 02-04-2016, 04:09 PM

As of this morning I have working wipers, tail lights and brake lights. For the wiper motor arm I used 1/2"X1"X5" but 1/2"X3/4"X3" would work. The center hole is 8mm with a 10mm step 3/4 of the way through. That is the profile of the wiper motor shaft. The pivot holes are 5/16" and I used a 5/16"X 1.5" bolt so the arm will pivot on the shoulder, then double nut. 2 vids of wipers.

http://vid51.photobucket.com/albums/...psc2f1reak.mp4

http://vid51.photobucket.com/albums/...pso8qptf7g.mp4

Name: IMG_0424.jpg
Views: 1005
Size: 63.5 KB

Name: IMG_0424.jpg
Views: 1005
Size: 63.5 KB

This is my first drawing not what I ended up with exactly. It's close.
Name: IMG_0427.jpg
Views: 1006
Size: 39.0 KB

iowaboynca · 02-04-2016, 04:19 PM

That's slick

**JJorgensen52** · 02-04-2016, 04:48 PM

This is great info! Is that center hole tight enough to interfere with the splines on the motor shaft, or are you just relying on the end nut to keep it tight enough?

Chance48 · 02-04-2016, 05:39 PM

I need to copy that instead of buying the 150 buck replacement.....hmmm, nice work amigo!

FarmerSid · 02-04-2016, 06:17 PM

That's slick! That's will help out a lot of us! ��

lower50's · 02-04-2016, 07:01 PM

Quote:

Originally Posted by JJorgensen52

This is great info! Is that center hole tight enough to interfere with the splines on the motor shaft, or are you just relying on the end nut to keep it tight enough?

Thanks guys I was dreading this part but it worked out quite nice. I had trouble finding info on how to do this. So I hope I explained it well enough. For $35 for the motor from a wrecker it's a great deal.
JJorgensen52 Bit of both the 10mm hole is drilled as a pilot for the arm and the angle down to the 8mm will grip on the splines. Then the nut will hold it as well. I ground a 10mm drill so it had a bigger angle on the tip.

**joedoh** · 02-04-2016, 08:55 PM

super dope! what a great mod. I hate to admit I threw away a blazer rear gate before pulling the motor.

lower50's · 02-05-2016, 04:13 PM

As of now I have gauges that as I can tell work and all my LED dash lights work.
I'm going to plug the block heater in tomorrow morning and fire the truck up. The only gauge that is not hooked up yet is boost.
Name: IMG_0446.jpg
Views: 933
Size: 39.5 KB

Name: IMG_0446.jpg
Views: 933
Size: 39.5 KB

4DSEVEN · 02-05-2016, 04:19 PM

Looks great man!

**JJorgensen52** · 02-05-2016, 04:31 PM

Quote:

Originally Posted by joedoh

super dope! what a great mod. I hate to admit I threw away a blazer rear gate before pulling the motor.

You and me both

Lowers, the truck is looking great! How soon will you be rolling?

lower50's · 02-05-2016, 05:18 PM

Thanks 4DSEVEN

[QUOTE=JJorgensen52;
Lowers, the truck is looking great! How soon will you be rolling?[/QUOTE]

Thanks. I think first test drive will be middle of April weather permitting. I have a 2 week holiday trip coming up in 2 weeks, so after that I should be able to pull it out of garage to the driveway for some testing.

lower50's · 02-08-2016, 09:11 AM

On Saturday my boys came out to the garage with me and they started the truck after a coin flip. I'm happy to say all the gauges work.

Here is a vid
http://vid51.photobucket.com/albums/...psqaksapv7.mp4

99 to Life · 02-08-2016, 10:56 AM

congrats

YahamaR1 · 02-08-2016, 02:25 PM

Looking good that dash..
Nice work on the wipers

84blaze · 02-08-2016, 02:43 PM

Ill be looking for one of the motors. Seems like an easy way to do it.

65sub · 02-08-2016, 09:25 PM

Truck sounds real good.

Warm weather is coming soon.

lower50's · 02-09-2016, 08:27 AM

Quote:

Originally Posted by 99 to Life

congrats

Thanks 99

Quote:

Originally Posted by YahamaR1

Looking good that dash..
Nice work on the wipers

Thanks R1 I'm happy with how it turned out

Quote:

Originally Posted by 84blaze

Ill be looking for one of the motors. Seems like an easy way to do it.

It was much easier than I was expecting.

Quote:

Originally Posted by 65sub

Truck sounds real good.

Warm weather is coming soon.

Thanks I know I cant wait. I'm really hoping for an early spring.

Chance48 · 02-09-2016, 09:28 AM

I love the sound of them old 7.3's. Can't wait to hear it run by on the road.

lower50's · 02-09-2016, 09:56 AM

Quote:

Originally Posted by Chance48

I love the sound of them old 7.3's. Can't wait to hear it run by on the road.

You will my friend you will...... Well in a video at very least.

**Dieselwrencher** · 02-10-2016, 09:48 PM

Great work! Is that your radio below the dash with the pic of the GMC? Also, is the pyro/boost gauge a glow shift? I've considered getting one of their fuel pressure gauges but I know they have had big issues in the past with being bad.

**Advanced Design** · 02-10-2016, 10:02 PM

Just caught the video. Great sound and a ton of cool features in your truck!

02-03-2016, 07:33 PM	#626
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: My 52 GMC Build Lower that was a nice mod. What wiper motor is that? __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

02-03-2016, 09:23 PM	#628
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: My 52 GMC Build making it look easy __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

02-04-2016, 04:09 PM	#630
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build As of this morning I have working wipers, tail lights and brake lights. For the wiper motor arm I used 1/2"X1"X5" but 1/2"X3/4"X3" would work. The center hole is 8mm with a 10mm step 3/4 of the way through. That is the profile of the wiper motor shaft. The pivot holes are 5/16" and I used a 5/16"X 1.5" bolt so the arm will pivot on the shoulder, then double nut. 2 vids of wipers. http://vid51.photobucket.com/albums/...psc2f1reak.mp4 http://vid51.photobucket.com/albums/...pso8qptf7g.mp4 This is my first drawing not what I ended up with exactly. It's close. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

02-04-2016, 04:19 PM	#631
iowaboynca Registered User Join Date: Aug 2012 Location: West Side of the valley, CA Posts: 878	Re: My 52 GMC Build That's slick __________________ Build: "1950" GMC -Charlotte

02-04-2016, 04:48 PM	#632
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	Re: My 52 GMC Build This is great info! Is that center hole tight enough to interfere with the splines on the motor shaft, or are you just relying on the end nut to keep it tight enough? __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)

02-04-2016, 05:39 PM	#633
Chance48 Registered User Join Date: Oct 2015 Location: Vinton, la Posts: 189	Re: My 52 GMC Build I need to copy that instead of buying the 150 buck replacement.....hmmm, nice work amigo! __________________ SHAKE N BAKE BABY, SHAKE N BAKE.... http://67-72chevytrucks.com/vboard/s...d.php?t=686729

02-04-2016, 06:17 PM	#634
FarmerSid Registered User Join Date: Jan 2012 Location: Eastern Ontario, Canada Posts: 1,041	Re: My 52 GMC Build That's slick! That's will help out a lot of us! �� __________________ 1952 Canadian Chevy 1300 C4 IFS & D44 IRS 5.3 HO L33 My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=632938

02-04-2016, 08:55 PM	#636
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,774	Re: My 52 GMC Build super dope! what a great mod. I hate to admit I threw away a blazer rear gate before pulling the motor. __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

02-05-2016, 04:13 PM	#637
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build As of now I have gauges that as I can tell work and all my LED dash lights work. I'm going to plug the block heater in tomorrow morning and fire the truck up. The only gauge that is not hooked up yet is boost. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

02-05-2016, 04:19 PM	#638
4DSEVEN Registered User Join Date: Jan 2009 Location: Ontario Canada Posts: 239	Re: My 52 GMC Build Looks great man!

02-05-2016, 05:18 PM	#640
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build Thanks 4DSEVEN [QUOTE=JJorgensen52; Lowers, the truck is looking great! How soon will you be rolling?[/QUOTE] Thanks. I think first test drive will be middle of April weather permitting. I have a 2 week holiday trip coming up in 2 weeks, so after that I should be able to pull it out of garage to the driveway for some testing. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

02-08-2016, 09:11 AM	#641
lower50's Registered User Join Date: Oct 2014 Location: Kitchener, Ontario, Canada Posts: 3,254	Re: My 52 GMC Build On Saturday my boys came out to the garage with me and they started the truck after a coin flip. I'm happy to say all the gauges work. Here is a vid http://vid51.photobucket.com/albums/...psqaksapv7.mp4 __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=648459 https://67-72chevytrucks.com/vboard/...d.php?t=769441 1951 MG TD 1967 Jeep CJ5 1.9L TDI 33X13.5X15 Mud Grapplers. 1952 GMC 9700 p/u 7.3L diesel on air, dually

02-08-2016, 10:56 AM	#642
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: My 52 GMC Build congrats __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

02-08-2016, 02:25 PM	#643
YahamaR1 Registered User Join Date: Oct 2011 Location: The Netherlands Posts: 547	Re: My 52 GMC Build Looking good that dash.. Nice work on the wipers __________________ My chevy 51...... http://67-72chevytrucks.com/vboard/s...d.php?t=541148 www.knutselracing.nl

02-08-2016, 02:43 PM	#644
84blaze Registered User Join Date: Mar 2013 Location: Edmonton, AB Posts: 298	Re: My 52 GMC Build Ill be looking for one of the motors. Seems like an easy way to do it. __________________ 1953 Chevrolet 1300: S10 frame swap/ GSI Backhalf/ 6.0LSX 1984 S10 Blazer: 6.0L LQ4 Swap FOLLOW ME ON INSTAGRAM - @84blaze



Register or Log In To remove these advertisements.

02-08-2016, 09:25 PM	#645
65sub Registered User Join Date: Jun 2014 Location: dresden , ontario Posts: 628	Re: My 52 GMC Build Truck sounds real good. Warm weather is coming soon. __________________ Dale ---------------- My suburban's Twisted Little Sister http://67-72chevytrucks.com/vboard/s...d.php?t=655167

02-09-2016, 09:28 AM	#647
Chance48 Registered User Join Date: Oct 2015 Location: Vinton, la Posts: 189	Re: My 52 GMC Build I love the sound of them old 7.3's. Can't wait to hear it run by on the road. __________________ SHAKE N BAKE BABY, SHAKE N BAKE.... http://67-72chevytrucks.com/vboard/s...d.php?t=686729

02-10-2016, 09:48 PM	#649
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: My 52 GMC Build Great work! Is that your radio below the dash with the pic of the GMC? Also, is the pyro/boost gauge a glow shift? I've considered getting one of their fuel pressure gauges but I know they have had big issues in the past with being bad. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

02-10-2016, 10:02 PM	#650
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: My 52 GMC Build Just caught the video. Great sound and a ton of cool features in your truck! __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

Register or Log In To remove these advertisements.