How about some pics of your 4x4 - Page 26 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

el cocho · 09-20-2009, 01:55 PM

heres my 81 gmc 3/4t longbed 4x4
468 bbc (550hp)
turbo 400
6" lift
20" american racing wheels
37" nitto's

blazinzuk · 10-11-2009, 02:53 PM

My 4x4 an 87 with lots of stuff

onlyifihadachevy · 09-09-2009, 10:49 PM

LIke your truck but is it going to make it out the garage? And I am pretty sure, those are the 35in boggers with a 6in lift because it looks pretty much like the stance mines has.

barthmonster · 09-09-2009, 10:52 PM

he can 'air-down' like the off-roaders to get in and out of the garage...

onlyifihadachevy · 09-09-2009, 11:07 PM

Sorry for messing up your pic but I think he just barely would make it if he does, see the pink lines. The white is what my truck will look like when i'm done its the exo. I bad version but similar.

19704x4 · 09-10-2009, 10:33 AM

I have a set of steel wheels with no rubber im going to use to get it out. Yep 6 with 35/16/16 boggers 14 boltff with detroit locker hd dana 44 up front with 410s

onlyifihadachevy · 09-10-2009, 06:26 PM

Same as mine its a 6 with 35/16/16.5, with a 10b and lock eaton

19704x4 · 09-10-2009, 09:05 PM

sweet. i did a disc conversion on the rear and i am using a hydroboost master cylinder to run 4 wheel disc brakes

onlyifihadachevy · 09-10-2009, 11:21 PM

It is site, but welcome and nice truck. The jeeps cool too, if you have any pic of them wheeling post it in the 4x4 action pic thread.
But i'm wondering why you put a chevy 350 and not a 302 in it, someone said it took less almost bolt in a 302 into his jeep, than a 350.

moharleyrider · 09-11-2009, 08:29 AM

Quote:

Originally Posted by onlyifihadachevy

It is site, but welcome and nice truck. The jeeps cool too, if you have any pic of them wheeling post it in the 4x4 action pic thread.
But i'm wondering why you put a chevy 350 and not a 302 in it, someone said it took less almost bolt in a 302 into his jeep, than a 350.

The 350 was already in it when I bought it and it runs like a champ!

409sbc pwr · 09-22-2009, 06:01 AM

my pavement pounder lol!

blklblsk8tr13 · 09-22-2009, 11:07 AM

here's mine. 68 on 75 frame. 11'' of lift and 38.5 swampers. has a dump bed and a 350. more pics to come.

vtblazer · 09-22-2009, 05:01 PM

Quote:

Originally Posted by blklblsk8tr13

here's mine. 68 on 75 frame.

...with a 71/72 front clip.

Why 11's to run 38's?

Mmmm, more pics please.

blklblsk8tr13 · 09-23-2009, 08:49 PM

Quote:

Originally Posted by vtblazer

...with a 71/72 front clip.

Why 11's to run 38's?

Mmmm, more pics please.

here ya go. it'd fit taller tires. used to run 46'' boggers when the leaf springs were good. how do you get them back to the original shape? the ranger's mine too. i bought the yellow one cause i thought it was awesome. im only 18 so my mom was PISSED when she came home and it was in the yard. haha

WILE E · 09-24-2009, 06:38 AM

here is a pic of my 72 k5. Got it a little over a month ago. Been working non stop to make it what i want. I bought it with a small lift and 35" tires. Now it's 9" lift with 38" boggers. Put in the dana 60, eaton, both 4:56's and locked. Built cage and bumpers, 4 wheel disc brakes, hydralic clutch, never like the mechanical linkage. Like most everyone's toys, it will never be done but that is what keeps it interesting!

0331grunt · 09-24-2009, 09:52 AM

Seeing these nice looking 4x4's is making me want one.. wait a minute, maybe two

Just curious.. what would ya'll think of a 69 crew cab sitting on 2 1/2 ton Rockwells with a 5.9 Cummins and a 10 speed Eaton running maybe some 42" IRocks? Been thinking about something like that....

muscletrucks · 09-24-2009, 09:58 AM

Wile, nice bumper/winch setup!!

WILE E · 09-24-2009, 10:08 AM

thanks for comment muslcetrucks! It took me a good week to make the bumpers and cage, but I enjoyed evey minute of it.

polaris21 · 09-24-2009, 10:54 AM

Heres a pic of my 86 chevy k10 i just bought for 900$. it has 9 in lift and has 36/14.5/ 16 super swampers.

70 beast · 09-24-2009, 06:21 PM

nice steel!

Kevnhcel · 09-28-2009, 08:34 PM

Took my 3-year old wheeling today! Trying to hook her young!!!

blazin71K5 · 09-29-2009, 03:09 PM

1987 1 ton k5
14 Bolt rear detroit locker 4.88 gears
Dana 60 front
th400 np205
stock tbi 350
39.5 boggers on 16.5x14 bart wheels

Rollinsqrbdy · 09-30-2009, 02:31 PM

Quote:

Originally Posted by blazin71K5

1987 1 ton k5
14 Bolt rear detroit locker 4.88 gears
Dana 60 front
th400 np205
stock tbi 350
39.5 boggers on 16.5x14 bart wheels

That blaze is sweeet. How much lift u got on it?

blazin71K5 · 09-30-2009, 03:48 PM

10" front springs
8" rear with the reaer shackle hangers removed
and front ones from another frame mounted to the
rear for an additional 2.5 inches of lift, also has 3
degree shims in the leaf pack for better driveline angle
don't like body lifts.

409sbc pwr · 09-30-2009, 11:14 PM

Quote:

Originally Posted by blazin71K5

1987 1 ton k5
14 Bolt rear detroit locker 4.88 gears
Dana 60 front
th400 np205
stock tbi 350
39.5 boggers on 16.5x14 bart wheels

this is one mean lookin k5 i like!!!!

09-20-2009, 01:55 PM	#1
el cocho Registered User Join Date: Sep 2009 Location: phx,az` Posts: 27	Re: How about some pics of your 4x4 heres my 81 gmc 3/4t longbed 4x4 468 bbc (550hp) turbo 400 6" lift 20" american racing wheels 37" nitto's

10-11-2009, 02:53 PM	#2
blazinzuk Registered User Join Date: Oct 2009 Location: Afton Wy Posts: 77	Re: How about some pics of your 4x4 My 4x4 an 87 with lots of stuff

09-09-2009, 10:49 PM	#3
onlyifihadachevy Registered User Join Date: Mar 2009 Location: seaside,ca Posts: 778	Re: How about some pics of your 4x4 LIke your truck but is it going to make it out the garage? And I am pretty sure, those are the 35in boggers with a 6in lift because it looks pretty much like the stance mines has. __________________ 72 gmc 2500 2wd drive convert My 72 thread http://67-72chevytrucks.com/vboard/s...d.php?t=346712 THe other truck, wheeler 69 1/2 4x4, yellow and rusty. http://67-72chevytrucks.com/vboard/s...d.php?t=350300

09-09-2009, 10:52 PM	#4
barthmonster Registered User Join Date: Nov 2007 Location: Chamberlain, SD Posts: 183	Re: How about some pics of your 4x4 he can 'air-down' like the off-roaders to get in and out of the garage...

09-09-2009, 11:07 PM	#5
onlyifihadachevy Registered User Join Date: Mar 2009 Location: seaside,ca Posts: 778	Re: How about some pics of your 4x4 Sorry for messing up your pic but I think he just barely would make it if he does, see the pink lines. The white is what my truck will look like when i'm done its the exo. I bad version but similar. __________________ 72 gmc 2500 2wd drive convert My 72 thread http://67-72chevytrucks.com/vboard/s...d.php?t=346712 THe other truck, wheeler 69 1/2 4x4, yellow and rusty. http://67-72chevytrucks.com/vboard/s...d.php?t=350300 Last edited by onlyifihadachevy; 09-09-2009 at 11:07 PM.

09-10-2009, 10:33 AM	#6
19704x4 Registered User Join Date: Nov 2008 Location: chesapeake, VA. Posts: 11	Re: How about some pics of your 4x4 I have a set of steel wheels with no rubber im going to use to get it out. Yep 6 with 35/16/16 boggers 14 boltff with detroit locker hd dana 44 up front with 410s

09-10-2009, 06:26 PM	#7
onlyifihadachevy Registered User Join Date: Mar 2009 Location: seaside,ca Posts: 778	Re: How about some pics of your 4x4 Same as mine its a 6 with 35/16/16.5, with a 10b and lock eaton __________________ 72 gmc 2500 2wd drive convert My 72 thread http://67-72chevytrucks.com/vboard/s...d.php?t=346712 THe other truck, wheeler 69 1/2 4x4, yellow and rusty. http://67-72chevytrucks.com/vboard/s...d.php?t=350300

09-10-2009, 09:05 PM	#8
19704x4 Registered User Join Date: Nov 2008 Location: chesapeake, VA. Posts: 11	Re: How about some pics of your 4x4 sweet. i did a disc conversion on the rear and i am using a hydroboost master cylinder to run 4 wheel disc brakes

09-10-2009, 11:21 PM	#9
onlyifihadachevy Registered User Join Date: Mar 2009 Location: seaside,ca Posts: 778	Re: How about some pics of your 4x4 It is site, but welcome and nice truck. The jeeps cool too, if you have any pic of them wheeling post it in the 4x4 action pic thread. But i'm wondering why you put a chevy 350 and not a 302 in it, someone said it took less almost bolt in a 302 into his jeep, than a 350. __________________ 72 gmc 2500 2wd drive convert My 72 thread http://67-72chevytrucks.com/vboard/s...d.php?t=346712 THe other truck, wheeler 69 1/2 4x4, yellow and rusty. http://67-72chevytrucks.com/vboard/s...d.php?t=350300 Last edited by onlyifihadachevy; 09-10-2009 at 11:21 PM.

09-22-2009, 06:01 AM	#11
409sbc pwr Registered User Join Date: Sep 2009 Location: longview washington Posts: 114	Re: How about some pics of your 4x4 my pavement pounder lol! Attached Images __________________ 84 3/4ton swap 4x4, 409sbc 37x13.50 toyos 8 inch superlift 2007 2500 HD, 10-12 cognito lift, 38x13.50 toyos soon to be boosted via rearmount system

09-22-2009, 11:07 AM	#12
blklblsk8tr13 Registered User Join Date: Sep 2009 Location: Hampton, Ga Posts: 40	Re: How about some pics of your 4x4 here's mine. 68 on 75 frame. 11'' of lift and 38.5 swampers. has a dump bed and a 350. more pics to come. Attached Images

09-24-2009, 06:38 AM	#15
WILE E Registered User Join Date: Feb 2009 Location: St.Anne IL Posts: 33	Re: How about some pics of your 4x4 here is a pic of my 72 k5. Got it a little over a month ago. Been working non stop to make it what i want. I bought it with a small lift and 35" tires. Now it's 9" lift with 38" boggers. Put in the dana 60, eaton, both 4:56's and locked. Built cage and bumpers, 4 wheel disc brakes, hydralic clutch, never like the mechanical linkage. Like most everyone's toys, it will never be done but that is what keeps it interesting! Attached Images

09-24-2009, 09:52 AM	#16
0331grunt Now what?? Join Date: Sep 2009 Location: Webbers Falls, OK Posts: 579	Re: How about some pics of your 4x4 Seeing these nice looking 4x4's is making me want one.. wait a minute, maybe two Just curious.. what would ya'll think of a 69 crew cab sitting on 2 1/2 ton Rockwells with a 5.9 Cummins and a 10 speed Eaton running maybe some 42" IRocks? Been thinking about something like that.... __________________ 69 Long Fleet - Project 06 Ram 1ton Cummins 4x4-DD 01 Tahoe- wifes "The quality of a persons life is in direct proportion to their commitment to excellence, regardless of their chosen field of endeavor." ~ Vince Lombardi "A dream doesn't become reality through magic, it takes sweat, determination and hard work." ~ Colin Powell my, um, build USMC OIF Veteran SEMPER FI!

09-24-2009, 09:58 AM	#17
muscletrucks Registered User Join Date: Mar 2008 Location: Kansas City Posts: 431	Re: How about some pics of your 4x4 Wile, nice bumper/winch setup!! __________________ 1972 GMC Sierra Grande 3/4 Ton 4x4 1970 Mercury Cougar XR7 1943 Farmall M

09-24-2009, 10:08 AM	#18
WILE E Registered User Join Date: Feb 2009 Location: St.Anne IL Posts: 33	Re: How about some pics of your 4x4 thanks for comment muslcetrucks! It took me a good week to make the bumpers and cage, but I enjoyed evey minute of it.



Register or Log In To remove these advertisements.

09-24-2009, 10:54 AM	#19
polaris21 Registered User Join Date: Feb 2009 Location: n/w Illinois Posts: 17	Re: How about some pics of your 4x4 Heres a pic of my 86 chevy k10 i just bought for 900$. it has 9 in lift and has 36/14.5/ 16 super swampers.

09-24-2009, 06:21 PM	#20
70 beast Certified Hobbiest Join Date: Jul 2007 Location: Sacramento, Ca Posts: 384	Re: How about some pics of your 4x4 nice steel! __________________ my jimmy build http://67-72chevytrucks.com/vboard/s...d.php?t=352536

09-28-2009, 08:34 PM	#21
Kevnhcel Registered User Join Date: Jul 2009 Location: Roseville Ca Posts: 23	Re: How about some pics of your 4x4 Took my 3-year old wheeling today! Trying to hook her young!!! Attached Images __________________ 1976 short bed 4x4 2006 Dodge Ram Hemi 2006 Four Winns Horizon 190

09-29-2009, 03:09 PM	#22
blazin71K5 Registered User Join Date: Aug 2009 Location: Cash,TX Posts: 285	Re: How about some pics of your 4x4 1987 1 ton k5 14 Bolt rear detroit locker 4.88 gears Dana 60 front th400 np205 stock tbi 350 39.5 boggers on 16.5x14 bart wheels Attached Images Last edited by blazin71K5; 09-30-2009 at 08:02 AM.

09-30-2009, 03:48 PM	#24
blazin71K5 Registered User Join Date: Aug 2009 Location: Cash,TX Posts: 285	Re: How about some pics of your 4x4 10" front springs 8" rear with the reaer shackle hangers removed and front ones from another frame mounted to the rear for an additional 2.5 inches of lift, also has 3 degree shims in the leaf pack for better driveline angle don't like body lifts.

Register or Log In To remove these advertisements.