Do you need '64-'66 Chevy Truck Parts?

[bubba327]

Hi Tony, Any power steering pump brackets for a 1970 I6 230/250 in a 64 truck? Will the the stock bracket fit with headers and aftermarket intake or stock only ? Bruce

[kwernli]

Tony, do you still have a complete short fleetside bed for sale?

[LILRED66]

Originally Posted by kwernli

Tony, do you still have a complete short fleetside bed for sale?

Good to hear from you Kent. I sold the real nice one I had when you came by the shop a few weeks ago, however I just took one in trade, that has a diamond plate floor welded in it. The plate is welded in under the bed and wheel tub flanges, so it is well done and looks good. The only rust is at one mounting bracket at the wheel arch. If I keep it, I may have it sandblasted, primed and have the inside coated with bed-liner.

It is for sale and is in good overall condition, with the exception of the small spot on the wheel arch and the metal bed. The diamond plate is puddle welded at the factory bolt holes in the flanges, so it could be removed without a lot of trouble or time.

In any case, let me know your thoughts and we can discuss it further, if you are interested.

[LILRED66]

Originally Posted by bubba327

Hi Tony, Any power steering pump brackets for a 1970 I6 230/250 in a 64 truck? Will the the stock bracket fit with headers and aftermarket intake or stock only ? Bruce

Hey Bruce. Thanks for the inquiry. I don't have a clue about the '67-'72 era trucks, but I do know the factory power steering pump mounting brackets are as rare as "hens teeth" and I have only seen them in pictures...never in person. I believe the factory bracket requires the mounting surfaces on the factory intake/exhaust manifold castings, but I am not totally certain. You may try posting in the '67-'72 forum, as well as, the engine & driveline forum.

Sorry I am not more help to you with this matter, but please keep me in mind for other good, used 4-5-6 Chevy truck parts in the future.

[aerotruk63]

Like these? LILRED66

[LILRED66]

Originally Posted by aerotruk63

Like these? LILRED66

I am not able to view the picture.

[joe231]

how much for the bed Tony?

do you have any other short fleet, bed sides?

[LILRED66]

Originally Posted by joe231

how much for the bed Tony?

do you have any other short fleet, bed sides?

Good morning Joe and sorry for my delay in responding. I sold the real nice swb fleetside bed, that I had, but I have another very good, swb fleetside bed, but it has one blem over the wheel arch, at the back-brace and it has steel diamond plate installed under the flange. It was puddle-welded at the factory bolt holes and it was done very workman-like. I may drill out the welds and remove the diamond plate, but it would make a very nice bed for someone that doesn't have to have the factory wood & wear strips. I am flexible on the price, so please let me know your thoughts.

In any case, it is a complete bed, so I don't have any good, used loose swb fleetside bed sides, at this time.

Please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future and thanks for the opportunity.

[aerotruk63]

Sorry, like these? Upper left.

[terd ferguson]

Tony,

I'm still looking for a total for the cab sails mounting brackets including shipping to NC 28025. I'm sure it'll be more than reasonable so I'll go ahead and say I'll take 'em. Please PM me your address with the total so I can get you a money order, I don't do Paypal. I hope that's ok.

Thanks very much for your help.

Cheers,
Kevin

[LILRED66]

Originally Posted by terd ferguson

Tony,

I'm still looking for a total for the cab sails mounting brackets including shipping to NC 28025. I'm sure it'll be more than reasonable so I'll go ahead and say I'll take 'em. Please PM me your address with the total so I can get you a money order, I don't do Paypal. I hope that's ok.

Thanks very much for your help.

Cheers,
Kevin

Good morning Kevin and thanks for the prompt reply. PM sent.

[LILRED66]

Originally Posted by aerotruk63

Sorry, like these? Upper left.

Thanks for the illustration. I don't have any GMC factory tow hooks, but I do have a few sets of the factory Chevy truck tow hooks. Sorry I am not able to help you with this item but please let me know if I can help you with any '60-'66 Chevy truck parts in the future and thanks for the opportunity.

[C10Slim]

Have any LWB fleetbed sides?

[LILRED66]

Originally Posted by C10Slim

Have any LWB fleetbed sides?

Thanks for the inquiry. I have a few good, used pairs of lwb fleetside bed sides, but it may be cost-prohibitive to ship them to TX.

[283 Man]

Tony do you still have your wall clocks with LILRED66 picture on the front ??? how much for that plus shipping to72712.. thanks

[54 jimmy]

looking fo a blower motor for a 60-66 c10. need it for my 47 heater box to up grade to 12v. the motor shaft is 1/4 the shaft length is 1-1/2 motor length is 3-3/4 motor dia is 3. the pic is what my 6v looks like. oh stud distance is2-5/16. the motor will be a two wire.

[LILRED66]

Originally Posted by 54 jimmy

looking fo a blower motor for a 60-66 c10. need it for my 47 heater box to up grade to 12v. the motor shaft is 1/4 the shaft length is 1-1/2 motor length is 3-3/4 motor dia is 3. the pic is what my 6v looks like. oh stud distance is2-5/16. the motor will be a two wire.

Thanks for the inquiry. A brand new blower motor for the 4-5-6 Chevy trucks is $19.95, plus tax from O'Reilly Auto Parts. That is your best bet. These motors are a single wire.

[LILRED66]

Originally Posted by 283 Man

Tony do you still have your wall clocks with LILRED66 picture on the front ??? how much for that plus shipping to72712.. thanks

Hey Mort, I do have a few clocks of LILRD66. They are $18.00, including shipping.

[jchav62]

Hey Tony,

I need a rear license plate bracket for a fleetside. Got one?

How much shipped...87507.

Thanks! JC

[LILRED66]

Originally Posted by jchav62

Hey Tony,

I need a rear license plate bracket for a fleetside. Got one?

How much shipped...87507.

Thanks! JC

Thanks for the inquiry JC. A good, used factory fleetside license plate bracket is $40.00, plus 10.00 shipping.

[aerotruk63]

Lilred66 could you show me the difference in the Chevrolet tow hooks compared to the GMC?

[283 Man]

Tony how much for 64-66 steering colmn, steering wheel with it turn singal lever all there. for a automatic picture please and I would more than likly drive up there for pick up. thanks Morton

[LILRED66]

Originally Posted by 283 Man

Tony how much for 64-66 steering colmn, steering wheel with it turn singal lever all there. for a automatic picture please and I would more than likly drive up there for pick up. thanks Morton

Mort:

Thanks for the inquiry. Do you want a standard steering wheel & chrome horn button or a Custom steering wheel & chrome horn ring?

[283 Man]

standard steering wheel for a automatic every thing functional,hook up and go.

[283 Man]

Ill take a LILRED66 clock do you take money orders? pm me your address and Ill send you a money order. thanks Morton