PO has me PO'd - Page 26 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jaros44sr** · 07-17-2008, 10:01 AM

K...Jon, I may have found an answer for our ill fitting alum. rads., seems like the 4 core brackets with a 2-3 core rubber works best

DURRTY · 07-17-2008, 05:38 PM

MAN these pics just saved me serious frustration and a bunch of time. This way makes sense. I was making no sense.

good work on your blazer

while you were doing the floor and rocker area work were you putting the fender and door on and off to check the alignment of it all or was it just done from measurements?

Quote:

Originally Posted by jaros44sr

Here is the piece that has to
fit up next to the cab mount box, make sure you fit this up on your 'A' post before final location of cab mount box.

**jaros44sr** · 07-17-2008, 05:59 PM

Cool, glad I could help ya. That's why I spend so much time taking pics., more work for me, but someone mite need referance. I had demensions, but I hung the door shell lots of times to make sure. Those scratches were hammer marks, ya can see how much I had to move metal. That was one of the more difficult areas to work on.

Just spent 2 months trying to figure out how to hang my alum. rad. with factory brackets, will post up pics shortly

How's yours gonin' haven't seen any updates lately

jb4short · 07-17-2008, 06:23 PM

Quote:

Originally Posted by jaros44sr

K...Jon, I may have found an answer for our ill fitting alum. rads., seems like the 4 core brackets with a 2-3 core rubber works best

When you're up I want to show you "Plan B" on the rad mounts. I think I can skip mounting them on top of the support all together and weld all those holes in. I'm going to make a long "L" shaped bracket about 2" x 2", and vee shaped from top to bottom, that will weld to the sides of the radiator and bolt into the two vertical supports on either side of the rad. I'll do them in aluminum and polish them up

msgross · 07-17-2008, 10:29 PM

Quote:

Originally Posted by jaros44sr

...I like the look of Kevs Classic...

I sent him the steel grill rings... they look nice don't they...

msgross · 07-17-2008, 10:31 PM

Quote:

Originally Posted by jaros44sr

...caveat emptor,

It's all that Latin that got you the job.....you'll be writing scripts next!

I'm still looking for picking up my floor in Aug, getting some parts from ScottH myself soon...

jb4short · 07-18-2008, 06:59 AM

Quote:

Originally Posted by msgross

I sent him the steel grill rings... they look nice don't they...

don't rub it in Mike unless you've got two more

**jaros44sr** · 07-18-2008, 08:30 AM

Quote:

Originally Posted by Tri-ProAutomotive

don't rub it in Mike unless you've got two more

Wonder what it cost to have them chromed???

jb4short · 07-18-2008, 08:32 AM

Quote:

Originally Posted by jaros44sr

Wonder what it cost to have them chromed???

There are two cycle shops up here that do small parts. One of them used to do all of Orange County Choppers stuff. His webiste, and this is NOT a joke, is: http://www.fixyour****ups.com

**jaros44sr** · 07-18-2008, 08:34 AM

Quote:

Originally Posted by Tri-ProAutomotive

When you're up I want to show you "Plan B" on the rad mounts. I think I can skip mounting them on top of the support all together and weld all those holes in. I'm going to make a long "L" shaped bracket about 2" x 2", and vee shaped from top to bottom, that will weld to the sides of the radiator and bolt into the two vertical supports on either side of the rad. I'll do them in aluminum and polish them up

Just got it, went down to look at mine, and I see the 'V' shape your talking about. Will it be isolated in rubber?

**jaros44sr** · 07-18-2008, 08:35 AM

Quote:

Originally Posted by Tri-ProAutomotive

There are two cycle shops up here that do small parts. One of them used to do all of Orange County Choppers stuff. His webiste, and this is NOT a joke, is: http://www.fixyour****ups.com

Yeah, that's the one that came to mind. Now we just have to find the steel rings

I tried to click on that site, no worky. Do I have to put an actual word in where the 'stars' are?

jb4short · 07-18-2008, 08:46 AM

Quote:

Originally Posted by jaros44sr

Yeah, that's the one that came to mind. Now we just have to find the steel rings

I tried to click on that site, no worky. Do I have to put an actual word in where the 'stars' are?

yes; starts with F rhymes with truck

**jaros44sr** · 07-18-2008, 08:47 AM

Finally got the alum. rad. mounted up. Seems like the problem is the corners of the tanks are more squared off, as compared to the radius of the stock tank. Got some 4 core mounts, thanks 6t727t2, and this gave me more space for the rubber to lay down. I still have to shorten the brackets by a 1/2", but atleast it's mounted in securely and I can move on to plumbing

jb4short · 07-18-2008, 08:48 AM

Quote:

Originally Posted by jaros44sr

Just got it, went down to look at mine, and I see the 'V' shape your talking about. Will it be isolated in rubber?

I'll just put some rubber washers there. It's still going to be sitting in the factory 4 core saddles. I'm going out now to get some aluminum stock and the welder will come by later today. I took pictures of the templates and I'll post them after it looks like it's a success...LOL

msgross · 07-18-2008, 11:12 AM

Quote:

Originally Posted by jaros44sr

Wonder what it cost to have them chromed???

I think he told me that he has a buddy that does it... He had those and another part done for $100 or so. One thing good about California I guess... wouldn't be that cheap out here... I think I sold them to him for like $50 or something too.... sorry Jon

http://www.67-72chevytrucks.com/vboa...d.php?t=294414

**jaros44sr** · 07-18-2008, 01:57 PM

Quote:

Originally Posted by Tri-ProAutomotive

yes; starts with F rhymes with truck

jb4short · 07-27-2008, 12:58 PM

Jimbo....no updates? If they think you're not doing anything you'll get called up to active duty

**jaros44sr** · 07-27-2008, 02:50 PM

Quote:

Originally Posted by Tri-ProAutomotive

Jimbo....no updates? If they think you're not doing anything you'll get called up to active duty

yeah, I can't turn wrenches, watch Nascar, and type at the same time

JC was over yesterday, dropped off my hardtop, he was very impressed with your '67 grille. I think he may be in contact with you. My parking lts slipped rite in, and that whole grille fit well. I used old parts including the hood latch

Finished up the grille/core support area, working on the hoses now

Bought myself some presents for getting a new job, top box and a tool/work cart. Parts came from Tim Christian, grille hoop clips, some other parts. Still one of the best guys to deal with...

jb4short · 07-27-2008, 06:00 PM

are you missing the grille center support?

Tim just sent me up some door seals; hope to see him the 8th or 9th down in Carlisle.

**jaros44sr** · 07-27-2008, 07:09 PM

Quote:

Originally Posted by Tri-ProAutomotive

are you missing the grille center support?

Tim just sent me up some door seals; hope to see him the 8th or 9th down in Carlisle.

Not missing, just didn't put it in. It feels real solid without it, maybe later maybe not at all. I may modify it to use the bottom half....looks like I'm going to miss Carlisle, enjoy and buy lots of parts

Big J · 07-27-2008, 09:11 PM

Looks like you'll have it fired up and runnin' cool in no time. Cool tool cart. I luv tools, lol.....

msgross · 07-27-2008, 11:25 PM

Quote:

Originally Posted by jaros44sr

Not missing, just didn't put it in. It feels real solid without it, maybe later maybe not at all. I may modify it to use the bottom half....looks like I'm going to miss Carlisle, enjoy and buy lots of parts

that sucks, I just came through your neck of the woods today. mama found a Ferrari in Philly that she HAD to have.. went ahead and made my trip to ScottH's place and picked all my goodies up since I was out that way... Sorry I didn't have a chance to stop in, pouring rain, Philly and a trailer was a little busy for me!

Here's a pic of what the new ride looks like... Little guy should like it!

**jaros44sr** · 07-28-2008, 06:09 AM

Quote:

Originally Posted by msgross

that sucks, I just came through your neck of the woods today. mama found a Ferrari in Philly that she HAD to have.. went ahead and made my trip to ScottH's place and picked all my goodies up since I was out that way... Sorry I didn't have a chance to stop in, pouring rain, Philly and a trailer was a little busy for me!

Here's a pic of what the new ride looks like... Little guy should like it!

I would have opted for the Testa Rossa, dated styling, but still better than the Daytona

No wonder our children grow up to be motorheads. What part of Philly were you in?

I wish I woulda known, JC came over and could've brought your parts, could've saved ya 4 hours of travel, Your right that was a very nasty storm, lightning was hitting all around us. Glad it didn't knock out the TV, indy was on.LOL

msgross · 07-28-2008, 12:27 PM

I was actually near Cherry hill, NJ for the bed... my sons ceiling fan is this one... hopefully he likes speed!

This isn't his but you get the idea... i have clouds painted on the ceiling.. now I just need to find a few Japanese zero's for it to shoot at.

I also have some Mario Andretti autographed prints to hand in his room still...

**jaros44sr** · 07-28-2008, 04:33 PM

Quote:

Originally Posted by msgross

I was actually near Cherry hill, NJ for the bed... my sons ceiling fan is this one... hopefully he likes speed!

This isn't his but you get the idea... i have clouds painted on the ceiling.. now I just need to find a few Japanese zero's for it to shoot at.

I also have some Mario Andretti autographed prints to hand in his room still...

That's cool, we used to fly airplanes(control line) as kids, put ribbons on the tail, and with two guys in a ring we could have dogfights. They were plastic to start out with, almost indestructable, well almost, but the motors always seemed to pull thru. Then you built the balsa wood models with the motor and continued on

Glad your bringing up Jr. the right way

Had to look at the pic twice, got it now...Corsair/ Navy no less

I have to read your threads closely, sometimes you stick bold type in there

07-17-2008, 10:01 AM	#626
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,704	Re: PO has me PO'd K...Jon, I may have found an answer for our ill fitting alum. rads., seems like the 4 core brackets with a 2-3 core rubber works best __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

07-17-2008, 05:59 PM	#628
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,704	Re: PO has me PO'd Cool, glad I could help ya. That's why I spend so much time taking pics., more work for me, but someone mite need referance. I had demensions, but I hung the door shell lots of times to make sure. Those scratches were hammer marks, ya can see how much I had to move metal. That was one of the more difficult areas to work on. Just spent 2 months trying to figure out how to hang my alum. rad. with factory brackets, will post up pics shortly How's yours gonin' haven't seen any updates lately __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

07-18-2008, 08:47 AM	#638
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,704	Re: PO has me PO'd Finally got the alum. rad. mounted up. Seems like the problem is the corners of the tanks are more squared off, as compared to the radius of the stock tank. Got some 4 core mounts, thanks 6t727t2, and this gave me more space for the rubber to lay down. I still have to shorten the brackets by a 1/2", but atleast it's mounted in securely and I can move on to plumbing __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

07-27-2008, 12:58 PM	#642
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: PO has me PO'd Jimbo....no updates? If they think you're not doing anything you'll get called up to active duty

07-27-2008, 06:00 PM	#644
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: PO has me PO'd are you missing the grille center support? Tim just sent me up some door seals; hope to see him the 8th or 9th down in Carlisle.

07-27-2008, 09:11 PM	#646
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,773	Re: PO has me PO'd Looks like you'll have it fired up and runnin' cool in no time. Cool tool cart. I luv tools, lol..... __________________ BAZINGA! My Build

07-28-2008, 12:27 PM	#649
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: PO has me PO'd I was actually near Cherry hill, NJ for the bed... my sons ceiling fan is this one... hopefully he likes speed! This isn't his but you get the idea... i have clouds painted on the ceiling.. now I just need to find a few Japanese zero's for it to shoot at. I also have some Mario Andretti autographed prints to hand in his room still... Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.