Do you need '64-'66 Chevy Truck Parts?

[LILRED66]

Originally Posted by 66BowTieBoy

Tony,

I'm in KC from time to time and maybe I could pickup at your place..? Need the whole thing, (seat & mountings). So what would it cost me?
Thanks.

Thanks for the prompt reply. A good, used factory bench seat with good, with original upholstery (one small tear) and factory seat tracks is $120.00, picked up at my shop in Kansas City, KS.

Please let me know if I can help you with this item or other good, used 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

[Riddick]

Do you have any H033 rear axle parts?such as the differential? any help is greatly appreciated thanks Bill

[LILRED66]

Originally Posted by Riddick

Do you have any H033 rear axle parts?such as the differential? any help is greatly appreciated thanks Bill

Bill:

Good afternoon and thanks for the inquiry. I have half a dozen factory 6 lug rear-ends, but I haven't checked the tag on any of them, so I don't know if they are HO33. If the tag is missing, will the HO33 be stamped on the passenger side axle tube? If so, I can check them. I see you are in Omaha, NE. Do you get to Kansas City much? If so, I can meet you at my shop and check out what I have. Please let me know your thougths and thanks for the opportunity.

[Sal's '55 Chevy]

soory i havent got back to you on the wheels tubs so what am i looking at if i get some that it fair shape or along them line?

[LILRED66]

Originally Posted by Sal's '55 Chevy

soory i havent got back to you on the wheels tubs so what am i looking at if i get some that it fair shape or along them line?

I either have a great set of a set with some rust on the flanges, so what is acceptable?

[Texasdeere]

Hey Tony,

Do you have a nice clean 6 lug steel 15 x 5.5 wide wheel? If so how much with shipping to 77510. I need a spare for my 59 Apache.

Thanks

[LILRED66]

Originally Posted by Texasdeere

Hey Tony,

Do you have a nice clean 6 lug steel 15 x 5.5 wide wheel? If so how much with shipping to 77510. I need a spare for my 59 Apache.

Thanks

Good evening and thanks for the inquiry. I don't have any of the skinny factory 6 lug steel wheels at this time. Sorry I couldn't help you with this item, but please let me know if I can help you with other 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

[Sal's '55 Chevy]

could you post pics of both?

[66 GMC 351E]

Hi Lil Red,
Do you have factory components to add power steering to my 66 GMC 351E? I'm trying to find stock before I consider the later model conversion. I understand the brackets for the 351E a difficult to come by. Thanks.

Dennis Arseneault
'66 GMC LWB Fleetside 351E
Avondale, AZ

[jame]

Hi Tony, I'm in need of a front clip for my 63. The rad support is rusted through at the body mounts. Taking it apart found I need everything. Grill support, radiator support, both inner and outer fenders. I see all the suppliers sell repo stuff. Since your pretty close (only about 2.5 hours) thought I would see if you have a rust free set up. My cab is pretty rough aswell - I would consider a cab swap or even a complete parts truck if you have a fairly rust free one with out a title or no drivetrain ect. I'm not partial to 1963 items actually wanted a 64-6 in the begining but this is what I found. It has turned out much worse than first expected. Thanks Jame

[62ChevyStep]

Lil Red,

I need a pair of good OEM trailing arms? I think they are all the same 60-66?

happen to have any?

thanks in advance

[LILRED66]

Originally Posted by 66 GMC 351E

Hi Lil Red,
Do you have factory components to add power steering to my 66 GMC 351E? I'm trying to find stock before I consider the later model conversion. I understand the brackets for the 351E a difficult to come by. Thanks.

Dennis Arseneault
'66 GMC LWB Fleetside 351E
Avondale, AZ

Dennis:

Good afternoon and thanks for the inquiry. Sorry for my delay in responding. I don't have any accessory items for the 305 or 351 GMC V6 engines. Sorry I couldn't help you with this item, but please let me know if I can help you with other '60-'66 Chevy/GMC truck parts in the future and thanks for the opportunity.

[LILRED66]

Originally Posted by jame

Hi Tony, I'm in need of a front clip for my 63. The rad support is rusted through at the body mounts. Taking it apart found I need everything. Grill support, radiator support, both inner and outer fenders. I see all the suppliers sell repo stuff. Since your pretty close (only about 2.5 hours) thought I would see if you have a rust free set up. My cab is pretty rough aswell - I would consider a cab swap or even a complete parts truck if you have a fairly rust free one with out a title or no drivetrain ect. I'm not partial to 1963 items actually wanted a 64-6 in the begining but this is what I found. It has turned out much worse than first expected. Thanks Jame

Jame:

I sent you a PM regarding a '60-'63 Chevy C10 front clip and cab. Please let me know if I can help you with these items or other '60-'66 Chevy truck parts in the future and thanks for the opportunity.

[LILRED66]

Originally Posted by 62ChevyStep

Lil Red,

I need a pair of good OEM trailing arms? I think they are all the same 60-66?

happen to have any?

thanks in advance

Good afternoon and thanks for the inquiry. I sent you a PM about the trailing arms.

Please let me know if I can help you with this item or other good, used 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

[Tx Firefighter]

Do you have one of these ? It's for the basic heater or whatever it's called out of my 63 truck. It's the heater that is completely self contained under the dash and not in the engine compartment.

I need a decent one to powdercoat. Mine is tweaked a bit too far to ever be repaired again.

[LILRED66]

Originally Posted by Tx Firefighter

Do you have one of these ? It's for the basic heater or whatever it's called out of my 63 truck. It's the heater that is completely self contained under the dash and not in the engine compartment.

I need a decent one to powdercoat. Mine is tweaked a bit too far to ever be repaired again.

TX:

Good morning and thanks for the inquiry. I have the item you are looking for. This part including shipping is $40.00.

I accept cashiers check or money order at the address in my signature or PayPal at: 4-5-6chevytrucks@sbcglobal.net

Please let me know if I can help you with this item or other good, used '60-'66 Chevy truck parts in the future and thanks for the opportunity.

[duallyjams]

I am looking for wheel tubs for my 64 GMC ( the best set that you have ) ship to 20751.
Thanks
James

[liftmeup]

Hi, I need a 4bbl air cleaner for a 66 c20 can you help ? thanks !! Pm me also

[karlbenz]

do you have patch panels?

lookin for drivers side floor panel, inner and outer rocker panel(driver side), lower rear fender panel for front fender(both sides) ext. rubber kit, window channel kit, shipped to 28083

thanks
karl

[LILRED66]

Originally Posted by duallyjams

I am looking for wheel tubs for my 64 GMC ( the best set that you have ) ship to 20751.
Thanks
James

James:

Good morning and sorry for my delay in responding. I have a few very nice sets of fleetside wheel tubs, that are rust-free. They are $125.00 per pair, plus $28.00 shipping, via UPS or FedEx.

Thanks for the opportunity and please let me know if I can help you with any good, used 4-5-6 Chevy truck parts in the future.

[LILRED66]

Originally Posted by liftmeup

Hi, I need a 4bbl air cleaner for a 66 c20 can you help ? thanks !! Pm me also

Good morning and thanks for the inquiry. I have a few good, used 4-5-6 Chevy truck factory 4-barrel air cleaners. They are $40.00, plus $12.00 shipping, via UPS or FedEx.

Thanks for the opportunity and please let me know if I can help you with this item or other good, used 4-5-6 Chevy truck parts in the future.

[LILRED66]

Originally Posted by karlbenz

do you have patch panels?

lookin for drivers side floor panel, inner and outer rocker panel(driver side), lower rear fender panel for front fender(both sides) ext. rubber kit, window channel kit, shipped to 28083

thanks
karl

Karl:

Good morning and thanks for the inquiry. I sell good, used parts for 4-5-6 Chevy trucks, so I can't help you with new patch panels or other new items. Here is a list of aftermarket truck parts suppliers, that sell items for these trucks:

www.bowtiebits.com
www.lmctruck.com
www.classicparts.com
www.oldchevytrucks.com
www.ecklerstrucks.com
www.gspp.com
www.truckandcarshop.com
www.harmons.com
www.oldmusclecars.com
www.classicchevroletparts.com
www.classicindustries.com
www.bobschevytrucks.com
www.brotherstrucks.com
www.mar-k.com
www.wheelvintiques.com
www.totallystainless.com
www.earlyclassic.com
www.horkeyswoodandparts.com
www.raybuck.com
www.americanclassic.com
www.yogisinc.com
www.rbsauto.com
www.obschevy.com
www.cheyennepickup.com
www.chevypickupparts.com

Most of them offer a free catalog and they are good reading. Welcome to the forums and thanks for the opportunity. Please let me know if I can help you with any good, used 4-5-6 Chevy truck parts in the future and good luck with your project.

[liftmeup]

ok pm me how you would like the payment of $52.00 I will get this to you asap. I have paypal or will send out a m.o

[283 Man]

Tony do you have any good 350 turbo 3 speed transmisions short tails.. price??? maybe picture thanks buddy..

[duallyjams]

pm sent