4D'S "63" GMC Build - Page 26 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

4dranch · 01-25-2010, 09:09 AM

Thanks Tim,

Darrah and I made it to the salvage yard Saturday and got our fender.

Darrah took alot of pictures and we posted them in our 60-66 general area.

Got the fender home and did a test fit and was very pleased at the fit.

4dranch · 01-25-2010, 09:09 AM

one more

jason65 · 01-25-2010, 09:13 AM

Looks good.

**Bugeyev8** · 01-25-2010, 12:28 PM

looks like a pretty good fender...wish mine were that good

4dranch · 01-25-2010, 04:24 PM

Thanks Jason,

Bugeye,
yeah besides the little dent up front its a nice fender

**Bugeyev8** · 01-25-2010, 04:43 PM

yeah..I am here in CA the "rust free state" and I ended up cutting two fenders to make one, after looking at the aftermarkets I decided that repairing an oem was better, those aftermarket fenders are junk! I collected fenders for the last 8 years from junkyards hoping to get a good one or two...they all ended up having bondo or rot or just too many dents to make a reasonable repair...what did you have to give for the fender??

4dranch · 01-25-2010, 05:05 PM

$30.00 and he threw in the other emblem.

**Bugeyev8** · 01-25-2010, 05:34 PM

sweet deal !!

**scotts62** · 01-25-2010, 06:53 PM

Yeah thats a real good deal

Alan's Classic · 01-26-2010, 11:52 PM

I like seeing the progress and great deals.

Keep it up.

4dranch · 01-27-2010, 08:53 PM

Thanks guys, that couple of days with nice weather got me off my butt..now the cold weather is back...oh well

**scotts62** · 01-31-2010, 11:51 AM

Yeah the cold sucks!

metalhead922 · 02-08-2010, 10:52 PM

Ryan here (with the '66 GMC Suburban)..

Thanks for the link to your pics.. just one more question.. the rivets.. do you use a regular pop rivet tool? or something else.. its about the only part I'm stumped on now.. haha
Thanks

4dranch · 02-09-2010, 09:18 PM

They are real soft. I just used something hard and smooth on the head side and a center punch and tap lightly. Hope this helps

4dranch · 03-07-2010, 04:07 PM

Enjoyed the sunshine yesterday and got to work on the truck. finished installing both the drivers inner fender and fender. now to the passenger side.

**scotts62** · 03-07-2010, 07:33 PM

Hey looks good David! After thats all replaced do you have to replace any other panels on the truck?

jason65 · 03-08-2010, 09:01 AM

Looks like it all lines up good. You and Darrah did a good job on it.

4dranch · 03-08-2010, 09:02 AM

Quote:

Originally Posted by scotts62

Hey looks good David! After thats all replaced do you have to replace any other panels on the truck?

Thanks Scott,
As far as panels that cannot be fixed because of the rust factor.
All thats left would be the passenger side inner fender and the drivers side floor is ruff.

Thanks Jason, yeah everything lined up real good,

01-25-2010, 09:09 AM	#626
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build Thanks Tim, Darrah and I made it to the salvage yard Saturday and got our fender. Darrah took alot of pictures and we posted them in our 60-66 general area. Got the fender home and did a test fit and was very pleased at the fit. Attached Images __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

01-25-2010, 09:09 AM	#627
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build one more Attached Images __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

01-25-2010, 09:13 AM	#628
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: 4D'S "63" GMC Build Looks good.

01-25-2010, 12:28 PM	#629
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: 4D'S "63" GMC Build looks like a pretty good fender...wish mine were that good

01-25-2010, 04:24 PM	#630
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build Thanks Jason, Bugeye, yeah besides the little dent up front its a nice fender __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q Last edited by 4dranch; 01-25-2010 at 04:25 PM.

01-25-2010, 04:43 PM	#631
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: 4D'S "63" GMC Build yeah..I am here in CA the "rust free state" and I ended up cutting two fenders to make one, after looking at the aftermarkets I decided that repairing an oem was better, those aftermarket fenders are junk! I collected fenders for the last 8 years from junkyards hoping to get a good one or two...they all ended up having bondo or rot or just too many dents to make a reasonable repair...what did you have to give for the fender??

01-25-2010, 05:05 PM	#632
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build $30.00 and he threw in the other emblem. __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

01-25-2010, 05:34 PM	#633
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: 4D'S "63" GMC Build sweet deal !!

01-25-2010, 06:53 PM	#634
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: 4D'S "63" GMC Build Yeah thats a real good deal __________________ Scott 93 crew cab build Project 62

01-26-2010, 11:52 PM	#635
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: 4D'S "63" GMC Build I like seeing the progress and great deals. Keep it up. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

01-27-2010, 08:53 PM	#636
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build Thanks guys, that couple of days with nice weather got me off my butt..now the cold weather is back...oh well __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

01-31-2010, 11:51 AM	#637
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: 4D'S "63" GMC Build Yeah the cold sucks! __________________ Scott 93 crew cab build Project 62

02-08-2010, 10:52 PM	#638
metalhead922 Registered User Join Date: Nov 2009 Location: Washington Posts: 19	Re: 4D'S "63" GMC Build Ryan here (with the '66 GMC Suburban).. Thanks for the link to your pics.. just one more question.. the rivets.. do you use a regular pop rivet tool? or something else.. its about the only part I'm stumped on now.. haha Thanks

02-09-2010, 09:18 PM	#639
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build They are real soft. I just used something hard and smooth on the head side and a center punch and tap lightly. Hope this helps __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

03-07-2010, 04:07 PM	#640
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 4D'S "63" GMC Build Enjoyed the sunshine yesterday and got to work on the truck. finished installing both the drivers inner fender and fender. now to the passenger side. Attached Images __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q



Register or Log In To remove these advertisements.

03-07-2010, 07:33 PM	#641
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: 4D'S "63" GMC Build Hey looks good David! After thats all replaced do you have to replace any other panels on the truck? __________________ Scott 93 crew cab build Project 62

03-08-2010, 09:01 AM	#642
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: 4D'S "63" GMC Build Looks like it all lines up good. You and Darrah did a good job on it.

Register or Log In To remove these advertisements.