What did you do to your truck today? - Page 260 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LT1 Burb · 11-06-2012, 09:08 PM

Dropped my motor off at the rebuild shop and got stock gray paint mixed up.

**MisterC** · 11-07-2012, 01:55 AM

Got the Porterbuilt shock mounts and the lower adjustable trac bar mount attached to my trailing arms. I removed 2 more rivets from the stock upper trac bar mount. Rivet removal is a major PITA while laying on your back under the bed!!!! 5 more rivets to go and the rear suspension work will wrap up quickly after that. I'll post the final results on my build thread when done.

Hx16457 · 11-07-2012, 07:25 AM

Finally after a lot of stress and effort, put the BBW in!
Posted via Mobile Device

glos55 · 11-07-2012, 07:32 AM

Quote:

Originally Posted by ChuckW

Bed's on. Wood is getting closer to being finished. Need to sort out a wheel/tire combo... So hard to do on a LB

Really like that color with the white top!

glos55 · 11-07-2012, 07:34 AM

Quote:

Originally Posted by glos55

Really like that color with the white top!

Truck is tucked and all is calm on Gasoline Alley

*bk2life* · 11-07-2012, 09:40 AM

wifey bought me my 24 inch semi wheels!!

Rac65 · 11-07-2012, 08:35 PM

Hey E911 manager ,I really like that color can you tell me what it is. name or code
Posted via Mobile Device

TxRat · 11-07-2012, 08:54 PM

I managed to to rewire my fans and put them on relays, They were wired straight to the fuse box before.

Now I have one that comes on with the key and the other comes on at 185*

here's the hillbilly wiring I pulled out that was running the fans.

Pulled these killer speakers out of the cab

and did a little tuning on the engine, sounds better..

VVV click the picture below VVV

Narxoleptic Customs · 11-07-2012, 11:33 PM

Got the driver side notch finished. Got the rear axle bolted in. The truck is finally sitting on it's own 4 wheels.
Posted via Mobile Device

LT1 Burb · 11-08-2012, 01:06 AM

Quote:

Originally Posted by Hx16457

Finally after a lot of stress and effort, put the BBW in!
Posted via Mobile Device

Any pictures?

willyp · 11-08-2012, 04:55 PM

got a cool poster in the mail today, from the goodguys show in charlotte a couple weeks back.

doobiebro · 11-08-2012, 06:12 PM

Quote:

Originally Posted by willyp

got a cool poster in the mail today, from the goodguys show in charlotte a couple weeks back.

Cool Willyp...Last month at a local car show a pin up model wanted to take some pics with my truck for her portfollio and she cancelled at the last minute!!.. what can I say...

Slow Build · 11-08-2012, 06:14 PM

Quote:

Originally Posted by willyp

got a cool poster in the mail today....

That's way too cool.

ABX131 · 11-08-2012, 08:25 PM

Found out the torque converter internally came apart and killed the pump in the tranny...Tranny was not damaged fortunately because we shut it down immediately...

ChuckW · 11-08-2012, 08:45 PM

Quote:

Originally Posted by Smoke_Dog

Like those wheels!

15 X 8 ? What size tire? Your Truck's looking great!

markeb01 · 11-08-2012, 08:58 PM

Quote:

Originally Posted by willyp

got a cool poster in the mail today, from the goodguys show in charlotte a couple weeks back.

Outstanding!

MikeS. · 11-09-2012, 05:46 AM

Here is a pic of the new wiring going in.

More new pics in my Gallery, see link below.

chad64chevy · 11-09-2012, 09:00 PM

i played around with my ammeter and switched to a volts meter!! i had a triple set of sunpro gauges for the volts, oil, water! i took the volts gauge housing apart and oblonged the two holes, also cut about 1/4" off the original housing! so it would slide down a lil and look more centered in the gauge cluster! anyways sorry for the crappy pics but i think you get the idea, last picture the gauge is just sitting in there and slide to the left a lil!! i think i'm going to add the oil and water gauge tomorrow

Improbcat · 11-09-2012, 09:59 PM

God a box full of goodies for the truck from a company that will remain nameless for the moment. Went to install the first one(chrome locking gas cap), tested the keys and they seemed to work, installed the cap and discovered the key doesn't unlock the cap when it is installed on the filler tube.
Just finished writing them an email asking if they'd prefer to pay for a locksmith to removed the cap or overnight me a replacement cap, filler neck, filler hose, clamps & filler gasket so I can replace the filler neck that now has a cap stuck on it.

64shortbox · 11-09-2012, 10:01 PM

Picked up a box of air bag stuff. Used, but I think I did good. I picked up a 5 gallon air tank, a Viair 380C compressor, a pair of Contitech FD -110 bags, a couple of 1/2" air valves, 40 amp relay, and a 5 port Ingersoll Rand 1/4" valve - I'm not sure how to use that but it all ran me a whopping $100.00. I couldn't get my wallet out fast enough. There's no pressure switch, switches, or dual needle air gauge but I think I did OK. I'm only going to bag the rear but I still want to split it side to side.

dantimdad · 11-09-2012, 10:40 PM

Got the upper ball joints off:

Thanks to this $14 gem from harbor freight:

Now, I have to figure out how to get the lowers out without owning a press.

Steven

dantimdad · 11-10-2012, 10:48 PM

Finally decided on the shifter knob. (I know, I know cart waaaay before the horse!)
I welded on a pineapple grenade. It look sweet! I forgot to take a pick at the shop.

Also got a bunch of the muck off of the front suspension parts so I could take them to the blaster. They are just to complicated to clean with a wire wheel. I can get the whole front suspension done for about $70.

Steven

**scotts62** · 11-10-2012, 10:53 PM

Started on the engine harness mock up, looks fun huh

Before pic, the after is not quite there

Vernski · 11-10-2012, 11:08 PM

Got some primer on the box,cab,doors so I can block it out, this is taking forever and a day....Vernski

**Captainfab** · 11-11-2012, 12:43 AM

Looking good Vernski

It won't be long and you'll have some color on there.

11-06-2012, 09:08 PM	#6476
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: What did you do to your truck today? Dropped my motor off at the rebuild shop and got stock gray paint mixed up.

11-07-2012, 01:55 AM	#6477
MisterC Senior Member Join Date: Sep 2011 Location: Hanford, CA Posts: 1,027	Re: What did you do to your truck today? Got the Porterbuilt shock mounts and the lower adjustable trac bar mount attached to my trailing arms. I removed 2 more rivets from the stock upper trac bar mount. Rivet removal is a major PITA while laying on your back under the bed!!!! 5 more rivets to go and the rear suspension work will wrap up quickly after that. I'll post the final results on my build thread when done. __________________ Poor and content is Rich...and Rich enough! - William Shakespeare 1966 C10 Custom Cab "Luigi" Big Window - SWB Fleetside 350 V-8 - Powerglide My not so much a build thread as a "Slow Progression Thread":http://67-72chevytrucks.com/vboard/s...d.php?t=486894

11-07-2012, 07:25 AM	#6478
Hx16457 Registered User Join Date: Sep 2012 Location: Lawton Oklahoma Posts: 308	Re: What did you do to your truck today? Finally after a lot of stress and effort, put the BBW in! Posted via Mobile Device __________________ People who make excuses didn't want to do it in the first place! http://s1326.photobucket.com/albums/...cpZZ1QQtppZZ16

11-07-2012, 09:40 AM	#6481
bk2life Account Suspended Join Date: Oct 2012 Location: phx, az Posts: 868	Re: What did you do to your truck today? wifey bought me my 24 inch semi wheels!!

11-07-2012, 08:35 PM	#6482
Rac65 Registered User Join Date: Aug 2011 Location: Shepherd, Texas Posts: 83	Re: What did you do to your truck today? Hey E911 manager ,I really like that color can you tell me what it is. name or code Posted via Mobile Device

11-07-2012, 08:54 PM	#6483
TxRat Registered User Join Date: Dec 2010 Location: Beaumont Texas Posts: 190	Re: What did you do to your truck today? I managed to to rewire my fans and put them on relays, They were wired straight to the fuse box before. Now I have one that comes on with the key and the other comes on at 185* here's the hillbilly wiring I pulled out that was running the fans. Pulled these killer speakers out of the cab and did a little tuning on the engine, sounds better.. VVV click the picture below VVV Last edited by TxRat; 11-07-2012 at 09:03 PM.

11-07-2012, 11:33 PM	#6484
Narxoleptic Customs Registered User Join Date: Dec 2011 Location: Blytheville/Bentonville, AR Posts: 393	Re: What did you do to your truck today? Got the driver side notch finished. Got the rear axle bolted in. The truck is finally sitting on it's own 4 wheels. Posted via Mobile Device

11-08-2012, 04:55 PM	#6486
willyp Registered User Join Date: Nov 2008 Location: Houston TX Posts: 362	Re: What did you do to your truck today? got a cool poster in the mail today, from the goodguys show in charlotte a couple weeks back. Attached Images __________________ The price of cool aint cheap.

11-08-2012, 08:25 PM	#6489
ABX131 Registered User Join Date: Mar 2012 Location: Seattle,WA Posts: 317	Re: What did you do to your truck today? Found out the torque converter internally came apart and killed the pump in the tranny...Tranny was not damaged fortunately because we shut it down immediately...

11-09-2012, 05:46 AM	#6492
MikeS. Registered User Join Date: Sep 2011 Location: FarEastern WVa Posts: 1,691	Re: What did you do to your truck today? Here is a pic of the new wiring going in. More new pics in my Gallery, see link below. __________________ Past Master Triluminar Lodge #117 GL of WVa My 1963 4x4 Suburban build; http://67-72chevytrucks.com/vboard/s...d.php?t=531274 My Gallery, now with pics of my 1966 C30 motorhome. http://67-72chevytrucks.com/gallery/...&ppuser=103447

11-09-2012, 09:00 PM	#6493
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: What did you do to your truck today? i played around with my ammeter and switched to a volts meter!! i had a triple set of sunpro gauges for the volts, oil, water! i took the volts gauge housing apart and oblonged the two holes, also cut about 1/4" off the original housing! so it would slide down a lil and look more centered in the gauge cluster! anyways sorry for the crappy pics but i think you get the idea, last picture the gauge is just sitting in there and slide to the left a lil!! i think i'm going to add the oil and water gauge tomorrow Attached Images __________________ my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163

11-09-2012, 09:59 PM	#6494
Improbcat Registered User Join Date: Jul 2012 Location: E Providence RI Posts: 238	Re: What did you do to your truck today? God a box full of goodies for the truck from a company that will remain nameless for the moment. Went to install the first one(chrome locking gas cap), tested the keys and they seemed to work, installed the cap and discovered the key doesn't unlock the cap when it is installed on the filler tube. Just finished writing them an email asking if they'd prefer to pay for a locksmith to removed the cap or overnight me a replacement cap, filler neck, filler hose, clamps & filler gasket so I can replace the filler neck that now has a cap stuck on it.

11-09-2012, 10:01 PM	#6495
64shortbox Registered User Join Date: Jan 2011 Location: Tulare, CA Posts: 734	Re: What did you do to your truck today? Picked up a box of air bag stuff. Used, but I think I did good. I picked up a 5 gallon air tank, a Viair 380C compressor, a pair of Contitech FD -110 bags, a couple of 1/2" air valves, 40 amp relay, and a 5 port Ingersoll Rand 1/4" valve - I'm not sure how to use that but it all ran me a whopping $100.00. I couldn't get my wallet out fast enough. There's no pressure switch, switches, or dual needle air gauge but I think I did OK. I'm only going to bag the rear but I still want to split it side to side. Attached Images

11-09-2012, 10:40 PM	#6496
dantimdad Registered User Join Date: Feb 2010 Location: Hartselle, Al. Posts: 466	Re: What did you do to your truck today? Got the upper ball joints off: Thanks to this $14 gem from harbor freight: Now, I have to figure out how to get the lowers out without owning a press. Steven __________________ “Life is and will ever remain an equation incapable of solution, but it contains certain known factors.” - Nikola Tesla Matt. 6:27 "Who of you by worrying can add a single hour to his life?” http://www.67-72chevytrucks.com/vboa...=507266&page=2

11-10-2012, 10:48 PM	#6497
dantimdad Registered User Join Date: Feb 2010 Location: Hartselle, Al. Posts: 466	Re: What did you do to your truck today? Finally decided on the shifter knob. (I know, I know cart waaaay before the horse!) I welded on a pineapple grenade. It look sweet! I forgot to take a pick at the shop. Also got a bunch of the muck off of the front suspension parts so I could take them to the blaster. They are just to complicated to clean with a wire wheel. I can get the whole front suspension done for about $70. Steven __________________ “Life is and will ever remain an equation incapable of solution, but it contains certain known factors.” - Nikola Tesla Matt. 6:27 "Who of you by worrying can add a single hour to his life?” http://www.67-72chevytrucks.com/vboa...=507266&page=2



Register or Log In To remove these advertisements.

11-10-2012, 10:53 PM	#6498
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: What did you do to your truck today? Started on the engine harness mock up, looks fun huh Before pic, the after is not quite there __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 11-10-2012 at 11:00 PM.

11-10-2012, 11:08 PM	#6499
Vernski Registered User Join Date: May 2009 Location: Rathdrum, Idaho Posts: 1,135	Re: What did you do to your truck today? Got some primer on the box,cab,doors so I can block it out, this is taking forever and a day....Vernski Attached Images

11-11-2012, 12:43 AM	#6500
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: What did you do to your truck today? Looking good Vernski It won't be long and you'll have some color on there. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

Register or Log In To remove these advertisements.