What did you do to your truck today? Chapter II - Page 260 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JustToxic · 03-22-2018, 11:19 AM

Nice job on the fuel line. Those valve covers are pretty slick, have to check them out for another project of mine.

rjs53 · 03-22-2018, 12:11 PM

Very nice work👍

stevenfromtexas · 03-22-2018, 09:29 PM

put my new weather strip on the drivers side. looks like door adjustment is on my list for tomorrow.

cornerstone · 03-22-2018, 10:13 PM

Pulled the cab back off in order to get some body work done easier, and to pull the TCM in order to send it off to be programmed.

Cbo68 · 03-22-2018, 10:27 PM

Put the grill molding on. Rainy day up here in the pnw and sweet 16 is on. Back inside !

**Boog** · 03-22-2018, 11:07 PM

turn

**Mts67C10K20** · 03-23-2018, 01:01 PM

Installed both hubs, calipers and shocks
And aligned the steering
Almost there
Ready to bleed the steering and brakes

66clow · 03-23-2018, 01:24 PM

About to finally have an emergency brake

tutone · 03-23-2018, 07:21 PM

I put in one of those cheap Chinese cardboard glove boxes that about half way fit. What a pain in the rear. Anyway after trimming and fighting it, I have a functional glove box. I need to update my build thread with some photos of the new parts.

stevenfromtexas · 03-23-2018, 10:31 PM

put my locking and window mechanisms in today. put the window channel felt in too. waiting on my vent window rubber. gonna have my wife help me install my back and front glass next week......gettin' closer yeeeeyaaaa

**SoCoC10** · 03-24-2018, 01:33 PM

New door weatherstripping, dash pad, seat upholstery and carpet kit.

wpavlis · 03-24-2018, 03:28 PM

Spent some quality time with a scraper and The saginaw I pulled out last weekend. Must have scraped off 3 pounds of a gross mixture of oil, grease and dirt. Tonight or tomorrow I will start disassembling it on my work bench.

OregonNed · 03-24-2018, 05:05 PM

Quote:

Originally Posted by RodnRudy

I bent up a new fuel line to better clear my new valve covers.

Those are sweet! Nice choice

slaughter442 · 03-24-2018, 05:57 PM

Off with the old step on with old sport love these trucks

yuccales · 03-24-2018, 10:40 PM

Quote:

Originally Posted by SoCoC10

New door weatherstripping, dash pad, seat upholstery and carpet kit.

Very nice! I spent only 10 mins on the '70 today, new highbeam switch. That's it.

StruttinSoul · 03-25-2018, 05:53 PM

Put buddy buckets and 3 point seatbelts in the truck today, amazing how different the truck looks now

rjs53 · 03-25-2018, 06:51 PM

I installed my new gas tank, pulled the seat and floor mat out and started cutting rust out of the floor and rockers. I definitely made more work than I did.

macdaddy70 · 03-25-2018, 07:14 PM

I got mine back from the body shop. New rockers, cab corners, floor patches. Then I drove it like I stole it.
He has had it for almost a month.

kilrcady · 03-25-2018, 07:54 PM

nothing,I did nothing.hmmm I hate the snow

stevenfromtexas · 03-25-2018, 09:58 PM

Quote:

Originally Posted by StruttinSoul

Put buddy buckets and 3 point seatbelts in the truck today, amazing how different the truck looks now

dang!! hey there brother from WAYYYY south of you

where/who did your seats????. I am wanting the same style!!!

stevenfromtexas · 03-25-2018, 10:06 PM

Quote:

Originally Posted by stevenfromtexas

put my new weather strip on the drivers side. looks like door adjustment is on my list for tomorrow.

....sooooo the weather strip "adjusted" themselves. I put them on and when I got home the next morning the doors lined up great!!!. Well.....great enough for rookie/first build/non show standards/daily driver/i dare anybody to say anything standards!! haha

stevenfromtexas · 03-26-2018, 10:09 PM

My sweet little wife helped me put my hood back on after I painted it again this morning.

need to do a little adjusting but hopefully it's on for the last time.

installed a new drivers/upper door hinge too.

66clow · 03-27-2018, 11:12 PM

Installed new springs for the rear brakes. Also installed the e-brake cables. Are theses routed correctly and my cable is too long. If I cut it what should I block the end off with?

**Mts67C10K20** · 03-28-2018, 04:28 PM

Is that possible a long bed cable on a short bed
Where the single cable joins the double is there any more adjustment?

Metaldoc · 03-28-2018, 05:48 PM

It's all painted again for the second time.

03-22-2018, 11:19 AM	#6476
JustToxic Registered User Join Date: Jul 2016 Location: Elkhart, Indiana Posts: 292	Re: What did you do to your truck today? Chapter II Nice job on the fuel line. Those valve covers are pretty slick, have to check them out for another project of mine. __________________ 1967 Chevy C20 to K20 Conversion "Simply Toxic" http://67-72chevytrucks.com/vboard/s...d.php?t=749409 1971 Chevy C20 Custom Camper LS Swap http://67-72chevytrucks.com/vboard/s...d.php?t=763775

03-22-2018, 12:11 PM	#6477
rjs53 Registered User Join Date: Jan 2010 Location: nevada Posts: 649	Re: What did you do to your truck today? Chapter II Very nice work👍 __________________ 2003 Dodge 2500 1969 C10 2014 Camaro SS/RS/1LE

03-22-2018, 09:29 PM	#6478
stevenfromtexas Registered User Join Date: Mar 2013 Location: Hewitt, Texas Posts: 444	Re: What did you do to your truck today? Chapter II put my new weather strip on the drivers side. looks like door adjustment is on my list for tomorrow. __________________ Steven '67 SWB, 250ci, 3OTT.......this is my first build...... I wonder if my grand kids will say, "I would give anything to have my grand dads 2005 Chevrolet Z71"

03-22-2018, 10:13 PM	#6479
cornerstone Registered User Join Date: Apr 2014 Location: Azle,Texas Posts: 2,248	Re: What did you do to your truck today? Chapter II Pulled the cab back off in order to get some body work done easier, and to pull the TCM in order to send it off to be programmed.

03-22-2018, 10:27 PM	#6480
Cbo68 Registered User Join Date: Mar 2018 Location: Kent Washington Posts: 43	Re: What did you do to your truck today? Chapter II Put the grill molding on. Rainy day up here in the pnw and sweet 16 is on. Back inside ! Attached Images

03-22-2018, 11:07 PM	#6481
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,531	Re: What did you do to your truck today? Chapter II turn Attached Images __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

03-23-2018, 01:01 PM	#6482
Mts67C10K20 Senior Member Join Date: May 2017 Location: Dowagiac Michigan Posts: 202	Re: What did you do to your truck today? Chapter II Installed both hubs, calipers and shocks And aligned the steering Almost there Ready to bleed the steering and brakes Attached Images

03-23-2018, 01:24 PM	#6483
66clow Registered User Join Date: Jun 2012 Location: Clearwater Beach Florida Posts: 873	Re: What did you do to your truck today? Chapter II About to finally have an emergency brake Attached Images

03-23-2018, 07:21 PM	#6484
tutone Registered User Join Date: Mar 2016 Location: hickory, ky Posts: 1,311	Re: What did you do to your truck today? Chapter II I put in one of those cheap Chinese cardboard glove boxes that about half way fit. What a pain in the rear. Anyway after trimming and fighting it, I have a functional glove box. I need to update my build thread with some photos of the new parts. __________________ :My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=807535 1972 K10 swb/1968 Camaro 350/4spd 1955 210 2 dr sedan/1998 RCSB Z71/1977 Jeep CJ5

03-23-2018, 10:31 PM	#6485
stevenfromtexas Registered User Join Date: Mar 2013 Location: Hewitt, Texas Posts: 444	Re: What did you do to your truck today? Chapter II put my locking and window mechanisms in today. put the window channel felt in too. waiting on my vent window rubber. gonna have my wife help me install my back and front glass next week......gettin' closer yeeeeyaaaa __________________ Steven '67 SWB, 250ci, 3OTT.......this is my first build...... I wonder if my grand kids will say, "I would give anything to have my grand dads 2005 Chevrolet Z71"

03-24-2018, 01:33 PM	#6486
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,343	Re: What did you do to your truck today? Chapter II New door weatherstripping, dash pad, seat upholstery and carpet kit. Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

03-24-2018, 03:28 PM	#6487
wpavlis Registered User Join Date: Oct 2015 Location: San Tan Valley, Arizona Posts: 313	Re: What did you do to your truck today? Chapter II Spent some quality time with a scraper and The saginaw I pulled out last weekend. Must have scraped off 3 pounds of a gross mixture of oil, grease and dirt. Tonight or tomorrow I will start disassembling it on my work bench.

03-24-2018, 05:57 PM	#6489
slaughter442 Registered User Join Date: Jan 2013 Location: Aville NC Posts: 3	Re: What did you do to your truck today? Chapter II Off with the old step on with old sport love these trucks Attached Images

03-25-2018, 05:53 PM	#6491
StruttinSoul Registered User Join Date: Jul 2017 Location: Langley, BC - Canada Posts: 79	Re: What did you do to your truck today? Chapter II Put buddy buckets and 3 point seatbelts in the truck today, amazing how different the truck looks now Attached Images

03-25-2018, 06:51 PM	#6492
rjs53 Registered User Join Date: Jan 2010 Location: nevada Posts: 649	Re: What did you do to your truck today? Chapter II I installed my new gas tank, pulled the seat and floor mat out and started cutting rust out of the floor and rockers. I definitely made more work than I did. __________________ 2003 Dodge 2500 1969 C10 2014 Camaro SS/RS/1LE



Register or Log In To remove these advertisements.

03-25-2018, 07:14 PM	#6493
macdaddy70 Registered User Join Date: Aug 2013 Location: Gluckstadt, MS Posts: 71	Re: What did you do to your truck today? Chapter II I got mine back from the body shop. New rockers, cab corners, floor patches. Then I drove it like I stole it. He has had it for almost a month.

03-25-2018, 07:54 PM	#6494
kilrcady Registered User Join Date: Sep 2015 Location: central NJ Posts: 102	Re: What did you do to your truck today? Chapter II nothing,I did nothing.hmmm I hate the snow

03-26-2018, 10:09 PM	#6497
stevenfromtexas Registered User Join Date: Mar 2013 Location: Hewitt, Texas Posts: 444	Re: What did you do to your truck today? Chapter II My sweet little wife helped me put my hood back on after I painted it again this morning. need to do a little adjusting but hopefully it's on for the last time. installed a new drivers/upper door hinge too. Attached Images __________________ Steven '67 SWB, 250ci, 3OTT.......this is my first build...... I wonder if my grand kids will say, "I would give anything to have my grand dads 2005 Chevrolet Z71"

03-27-2018, 11:12 PM	#6498
66clow Registered User Join Date: Jun 2012 Location: Clearwater Beach Florida Posts: 873	Re: What did you do to your truck today? Chapter II Installed new springs for the rear brakes. Also installed the e-brake cables. Are theses routed correctly and my cable is too long. If I cut it what should I block the end off with? Attached Images

03-28-2018, 04:28 PM	#6499
Mts67C10K20 Senior Member Join Date: May 2017 Location: Dowagiac Michigan Posts: 202	Re: What did you do to your truck today? Chapter II Is that possible a long bed cable on a short bed Where the single cable joins the double is there any more adjustment?

03-28-2018, 05:48 PM	#6500
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: What did you do to your truck today? Chapter II It's all painted again for the second time. Attached Images

Register or Log In To remove these advertisements.