What did you do to your truck today? Chapter II - Page 266 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Deej-79 · 04-17-2018, 09:43 PM

Quote:

Originally Posted by 71gmcC15

I put in a seat. Its out of a 95. So much nicer then the old bench.

Same thing I did on Saturday with the same seat from a 99 Yukon. Put your tilt levers on the opposite sides and they'll be more level. Mine were swapped for some reason too

spiked · 04-17-2018, 11:17 PM

got the wife's truck cleaned up & test driven now that the snow is almost gone

**Boog** · 04-17-2018, 11:23 PM

Very nice.

**3757chevy** · 04-18-2018, 12:58 AM

Very Very nice

, Does She let You drive it?

71gmcC15 · 04-18-2018, 03:16 PM

Quote:

Originally Posted by Deej-79

Same thing I did on Saturday with the same seat from a 99 Yukon. Put your tilt levers on the opposite sides and they'll be more level. Mine were swapped for some reason too

i guss they did not bother me but i do it to see what you mean

spiked · 04-18-2018, 04:30 PM

Quote:

Originally Posted by 3757chevy

Very Very nice

, Does She let You drive it?

she will let me test drive it once i have done something to it, but as for a cruse, no. she figures i have my own junk to drive & i'm ok with that.

**3757chevy** · 04-18-2018, 04:43 PM

KQQL IT · 04-18-2018, 08:20 PM

Quote:

Originally Posted by mikecaddy500

Is that a factory rear tank? Mine is mounted forward of the rear wheel and would like to add a rear tank. I was thinking about trying a blazer tank.

Was done way before I owned it.
It's a blazer fill neck and a suburban tank as I'm told.

NoStopN · 04-18-2018, 08:59 PM

Quote:

Originally Posted by spiked

she will let me test drive it once i have done something to it, but as for a cruse, no. she figures i have my own junk to drive & i'm ok with that.

If that's her ride, I'm curious to see what kind of "junk" you have.

bill3rail · 04-18-2018, 09:26 PM

Hanger bearing crapped out so I removed the two-piece shaft and I will try to drop it off at a drive shaft shop tomorrow.

Bill

bill3rail · 04-18-2018, 09:27 PM

Hanger bearing crapped out so I removed the two-piece shaft and I will try to drop it off at a drive shaft shop tomorrow.

Bill

stevenfromtexas · 04-18-2018, 09:33 PM

installed new u-joints and put my drive shaft in today. gonna adjust the the rear brakes tomorrow and change the oil and filters. put a new mechanical fuel pump on too.

Deej-79 · 04-18-2018, 09:58 PM

Quote:

Originally Posted by 71gmcC15

i guss they did not bother me but i do it to see what you mean

They're easier to operate if you do

spiked · 04-18-2018, 11:02 PM

Quote:

Originally Posted by NoStopN

If that's her ride, I'm curious to see what kind of "junk" you have.

We always call our stuff junk not sure why but we have always said it that way.it might be a Canadian thing because when we go to car shows we hear a lot of people call there cars junk but they are not? I would never call anyone else's vehicle junk because really they are a work of art. we all put lots of time and effort into restoring our vehicles.My junk collection consist's of a 87 Buick GN,68 chev caprice & a 2013 CTSV wagon

cornerstone · 04-19-2018, 06:14 PM

Yesterday I sanded just about all day and today I sprayed the cab in epoxy primer.

NoStopN · 04-19-2018, 08:40 PM

Quote:

Originally Posted by spiked

We always call our stuff junk not sure why but we have always said it that way.it might be a Canadian thing because when we go to car shows we hear a lot of people call there cars junk but they are not? I would never call anyone else's vehicle junk because really they are a work of art. we all put lots of time and effort into restoring our vehicles.My junk collection consist's of a 87 Buick GN,68 chev caprice & a 2013 CTSV wagon

People all over the world call their own stuff "junk". It's probably just the idea that no matter how good we think our vehicles are, we know somebody has gone to greater lengths to create theirs. Of course, it could just be the joke about opposites. Kind of like calling a big guy "Tiny".

Also, your collection sounds pretty good.

spiked · 04-19-2018, 10:29 PM

Quote:

Originally Posted by NoStopN

People all over the world call their own stuff "junk". It's probably just the idea that no matter how good we think our vehicles are, we know somebody has gone to greater lengths to create theirs. Of course, it could just be the joke about opposites. Kind of like calling a big guy "Tiny".

Also, your collection sounds pretty good.

i think you are right on that.

**3757chevy** · 04-20-2018, 01:15 AM

You mean like when they call me big guy , .... and .... I look behind me.

Metaldoc · 04-20-2018, 02:52 PM

Used an old school bead roller, hammer and some round bar bent to the radius. This finishes the cover plate for nv3500 swap. A bit of black paint and it will look store bought.

1968 baby blue C10 · 04-20-2018, 03:36 PM

Got rid of the stupid plastic air cleaner spacer that was on it when I got it, the air cleaner would even sit straight. Put on an Allstar aluminum spacer with an o-ring seal on the bottom. Took some convincing and a small cut in the baseplate of the air cleaner to get it to fit for some reason. But it’s on there good now.
And put a new Accell distributor cap and rotor on. The one that was on it said made in the USA with no brand so I’d say it’s pretty old haha
And lastly I made a pretty neat overflow for my radiator from a cool old bottle my uncle gave me.

71gmcC15 · 04-20-2018, 10:42 PM

Quote:

Originally Posted by Deej-79

They're easier to operate if you do

How do they come off? I looked at them but i dont not see how they come off
Edit never mind i figered it out. The driver side did not have a screw in it so i could tell.
Looked one the passager side and it had a screw. I fell dumb for asking such a question

cornerstone · 04-20-2018, 11:16 PM

I sanded, sanded, are lunch and then sanded some more.

**71CHEVYSHORTBED402** · 04-21-2018, 06:06 PM

This represents the last batch of the hardware I've cleaned. Countless hours and well over 1000 pieces. I won't miss it. If I knew of their existence I'd have bought a tumbler, but they came out nice. Next stop is black zink plating.

69BUCKET · 04-21-2018, 06:12 PM

Got my t-bone gauges in....harness and fluids in...first fire tomorrow...

ZEKE68 · 04-21-2018, 10:16 PM

Got the pump to carb fuel line fabbed up. A whole evening into it.

04-17-2018, 11:17 PM	#6627
spiked Registered User Join Date: Dec 2017 Location: Calgary Posts: 5	Re: What did you do to your truck today? Chapter II got the wife's truck cleaned up & test driven now that the snow is almost gone Attached Images

04-17-2018, 11:23 PM	#6628
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,513	Re: What did you do to your truck today? Chapter II Very nice. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

04-18-2018, 12:58 AM	#6629
3757chevy Senior Member Join Date: Mar 2016 Location: Near Canon City ,Colorado Posts: 4,056	Re: What did you do to your truck today? Chapter II Very Very nice , Does She let You drive it? __________________ '35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013) '67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010) My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056 "Another Blue Chevy"(1935) http://67-72chevytrucks.com/vboard/s...d.php?t=799203 '68 Burb...https://67-72chevytrucks.com/vboard/...d.php?t=822994 MIKE

04-18-2018, 04:43 PM	#6632
3757chevy Senior Member Join Date: Mar 2016 Location: Near Canon City ,Colorado Posts: 4,056	Re: What did you do to your truck today? Chapter II __________________ '35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013) '67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010) My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056 "Another Blue Chevy"(1935) http://67-72chevytrucks.com/vboard/s...d.php?t=799203 '68 Burb...https://67-72chevytrucks.com/vboard/...d.php?t=822994 MIKE

04-18-2018, 09:26 PM	#6635
bill3rail Registered User Join Date: Jul 2013 Location: LI, NY 11801 Posts: 1,140	Re: What did you do to your truck today? Chapter II Hanger bearing crapped out so I removed the two-piece shaft and I will try to drop it off at a drive shaft shop tomorrow. Bill __________________ 1970 C10 8' Fleetside, L6 250, 3 on the Tree. The most basic of pickup trucks!

04-18-2018, 09:27 PM	#6636
bill3rail Registered User Join Date: Jul 2013 Location: LI, NY 11801 Posts: 1,140	Re: What did you do to your truck today? Chapter II Hanger bearing crapped out so I removed the two-piece shaft and I will try to drop it off at a drive shaft shop tomorrow. Bill __________________ 1970 C10 8' Fleetside, L6 250, 3 on the Tree. The most basic of pickup trucks!

04-18-2018, 09:33 PM	#6637
stevenfromtexas Registered User Join Date: Mar 2013 Location: Hewitt, Texas Posts: 444	Re: What did you do to your truck today? Chapter II installed new u-joints and put my drive shaft in today. gonna adjust the the rear brakes tomorrow and change the oil and filters. put a new mechanical fuel pump on too. __________________ Steven '67 SWB, 250ci, 3OTT.......this is my first build...... I wonder if my grand kids will say, "I would give anything to have my grand dads 2005 Chevrolet Z71"

04-19-2018, 06:14 PM	#6640
cornerstone Registered User Join Date: Apr 2014 Location: Azle,Texas Posts: 2,248	Re: What did you do to your truck today? Chapter II Yesterday I sanded just about all day and today I sprayed the cab in epoxy primer. Attached Images

04-20-2018, 01:15 AM	#6643
3757chevy Senior Member Join Date: Mar 2016 Location: Near Canon City ,Colorado Posts: 4,056	Re: What did you do to your truck today? Chapter II You mean like when they call me big guy , .... and .... I look behind me. __________________ '35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013) '67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010) My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056 "Another Blue Chevy"(1935) http://67-72chevytrucks.com/vboard/s...d.php?t=799203 '68 Burb...https://67-72chevytrucks.com/vboard/...d.php?t=822994 MIKE

04-20-2018, 02:52 PM	#6644
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: What did you do to your truck today? Chapter II Used an old school bead roller, hammer and some round bar bent to the radius. This finishes the cover plate for nv3500 swap. A bit of black paint and it will look store bought. Attached Images

04-20-2018, 03:36 PM	#6645
1968 baby blue C10 Registered User Join Date: Sep 2017 Location: Ravenswood, West Virginia Posts: 239	Re: What did you do to your truck today? Chapter II Got rid of the stupid plastic air cleaner spacer that was on it when I got it, the air cleaner would even sit straight. Put on an Allstar aluminum spacer with an o-ring seal on the bottom. Took some convincing and a small cut in the baseplate of the air cleaner to get it to fit for some reason. But it’s on there good now. And put a new Accell distributor cap and rotor on. The one that was on it said made in the USA with no brand so I’d say it’s pretty old haha And lastly I made a pretty neat overflow for my radiator from a cool old bottle my uncle gave me. Attached Images __________________ 68 C10 long-fleet, Long and low is the way to go. factory: 307 sbc, SM465 4-speed, 12 bolt 4.11 rear end. 75,000 original miles. Build:Ole Blue Millennial and can drive stick. "Too many people have opinions on things they know nothing about. And the more ignorant they are, the more opinions they have." -Thomas Hildern

04-20-2018, 11:16 PM	#6647
cornerstone Registered User Join Date: Apr 2014 Location: Azle,Texas Posts: 2,248	Re: What did you do to your truck today? Chapter II I sanded, sanded, are lunch and then sanded some more. Attached Images

04-21-2018, 06:06 PM	#6648
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,320	Re: What did you do to your truck today? Chapter II This represents the last batch of the hardware I've cleaned. Countless hours and well over 1000 pieces. I won't miss it. If I knew of their existence I'd have bought a tumbler, but they came out nice. Next stop is black zink plating. Attached Images __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

04-21-2018, 06:12 PM	#6649
69BUCKET Registered User Join Date: Oct 2017 Location: Newton Posts: 216	Re: What did you do to your truck today? Chapter II Got my t-bone gauges in....harness and fluids in...first fire tomorrow... Attached Images

04-21-2018, 10:16 PM	#6650
ZEKE68 Registered User Join Date: Jul 2012 Location: Space Coast, Florida Posts: 403	Re: What did you do to your truck today? Chapter II Got the pump to carb fuel line fabbed up. A whole evening into it. Attached Images __________________ 1968 SWB Step Side, Big Block, 4L80E , Running!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.