Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy - Page 27 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67cheby** · 01-21-2013, 12:30 PM

Looking forward to getting it stripped down , cleaned up , checked out. I want to run a small cam in it and a custom intake of some sort ?

thor · 01-21-2013, 01:37 PM

Quote:

Originally Posted by 67cheby

Looking forward to getting it stripped down , cleaned up , checked out. I want to run a small cam in it and a custom intake of some sort ?

FAST intake perhaps??? http://www.fuelairspark.com/2/FS/Intake/Default.aspx

Magnusson supercharger perhaps??? https://www.magnacharger.com/p-49-gm...ercharger.aspx

Scottshotrods · 01-21-2013, 01:40 PM

Man $500.00 is a GREAT DEAL on the package for the motor and tranny and computer.

Justin

Zoomin · 01-21-2013, 01:43 PM

What are the plans for this engine, Mike? A can of gunk and freshening up, or are you going to build it up some?

*edit * n/m finally caught up. Great buy!

**67cheby** · 01-21-2013, 02:06 PM

OH......man......WHAT A GREAT DAY ! SCOTTS you guys ROCK !

Check out the nice detail work and welds on the arms ! and they are also adustable so you can tune it in PERFECT !

The torsion sway bar is absolutely SICK !

SS bags !

**67cheby** · 01-21-2013, 02:09 PM

next.....Scott's IFS...this piece is BEAUTIFUL the welds and finish work are TOP NOTCH !

The 3 piece trans mount , love that !

The rear 4link SUPER SLAM !!

**67cheby** · 01-21-2013, 02:17 PM

here is some other parts

My Scott's underdash brake pedal set up , how cool is that !

Steering knuckles

**67cheby** · 01-21-2013, 02:17 PM

Wow......i am pumped ! Thanks justin !

**67cheby** · 01-21-2013, 02:19 PM

and a BIG THANK YOU TO CPP !

**67cheby** · 01-21-2013, 02:21 PM

Quote:

Originally Posted by thor

FAST intake perhaps??? [URL="http://www.fuelairspark.com/2/FS/Intake/Default.aspx"]http://www.fuelairspark.com/2/FS/Intake/Default.aspx[/Uw

Magnusson supercharger perhaps??? https://www.magnacharger.com/p-49-gm...ercharger.aspx

we will see....those would be sweet !

Quote:

Originally Posted by Scottshotrods

Man $500.00 is a GREAT DEAL on the package for the motor and tranny and computer.

Justin

Yes i was pumped to finally find that deal i was searching for !

Quote:

Originally Posted by Zoomin

What are the plans for this engine, Mike? A can of gunk and freshening up, or are you going to build it up some?

*edit * n/m finally caught up. Great buy!

Probably go through freshen it up and add a cam

jlsanborn · 01-21-2013, 02:30 PM

Is that Wilwood piece and adjustable prop? Part number?

jlsanborn · 01-21-2013, 02:31 PM

Man the TIG welding is over the top! Pure BLING there!

**67cheby** · 01-21-2013, 02:38 PM

Quote:

Originally Posted by jlsanborn

Is that Wilwood piece and adjustable prop? Part number?

yes part# 260-8419

Quote:

Originally Posted by jlsanborn

Man the TIG welding is over the top! Pure BLING there!

YES IT IS !

jlsanborn · 01-21-2013, 02:45 PM

Thanks!

Beer for ya! I think its Guiness?

**oldman3** · 01-21-2013, 03:15 PM

Mike, congrats on the eninge fine. A friend just picked up 2005 5.3, trans and computor with 81,000 miles for $1200, which I thought was a great deal. Your front end looks great, my son and I installed one of their units in a 32 F**d, and it looks super...Jim

Dinos63 · 01-21-2013, 06:03 PM

whoa!

**67cheby** · 01-21-2013, 06:31 PM

Quote:

Originally Posted by jlsanborn

Thanks!

Beer for ya! I think its Guiness?

LOL...too dark for me !

Quote:

Originally Posted by oldman3

Mike, congrats on the eninge fine. A friend just picked up 2005 5.3, trans and computor with 81,000 miles for $1200, which I thought was a great deal. Your front end looks great, my son and I installed one of their units in a 32 F**d, and it looks super...Jim

Yep 1200 would be a great deal also ! thanks Jim

Quote:

Originally Posted by Dinos63

whoa!

Thanks Man !

tvblazer78 · 01-21-2013, 09:41 PM

Man nice stuff!......

**67cheby** · 01-22-2013, 10:10 AM

Got the 5.3 all cleaned up and stripped down last night !

6772owner · 01-22-2013, 10:19 AM

I cant wait to see all that frame/drivetrain come together, loving the build buddy!

**67cheby** · 01-22-2013, 10:59 AM

Thanks man , i am pumped also !

watahyahknow · 01-22-2013, 11:15 AM

thats a real steal of an engine , i informed once about a truckversion of a 6.0 (LQ) and the guy wanted 5000 euro
sure would safe some cash to live in the states where those engines are a little more common

**LEEVON** · 01-22-2013, 11:38 AM

Comp cams 212/218 with .522/.529 lift
LS6 valve springs
7.4" hardened push rods

Easy on the wallet, mo' powah!

**LEEVON** · 01-22-2013, 11:39 AM

Oh yeah, how on earth did you get that thing so clean?

DrppdBlazr · 01-22-2013, 11:50 AM

probably was power washed...when I got my 5.3 it was pretty clean then we degreased and power washed it and it looked brand new.

Builds coming along good man...

01-21-2013, 12:30 PM	#651
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Looking forward to getting it stripped down , cleaned up , checked out. I want to run a small cam in it and a custom intake of some sort ? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-21-2013, 01:40 PM	#653
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Man $500.00 is a GREAT DEAL on the package for the motor and tranny and computer. Justin

01-21-2013, 01:43 PM	#654
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy What are the plans for this engine, Mike? A can of gunk and freshening up, or are you going to build it up some? edit n/m finally caught up. Great buy! __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro Last edited by Zoomin; 01-21-2013 at 01:49 PM.

01-21-2013, 02:06 PM	#655
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy OH......man......WHAT A GREAT DAY ! SCOTTS you guys ROCK ! Check out the nice detail work and welds on the arms ! and they are also adustable so you can tune it in PERFECT ! The torsion sway bar is absolutely SICK ! SS bags ! Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-21-2013, 02:09 PM	#656
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy next.....Scott's IFS...this piece is BEAUTIFUL the welds and finish work are TOP NOTCH ! The 3 piece trans mount , love that ! The rear 4link SUPER SLAM !! Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-21-2013, 02:17 PM	#657
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy here is some other parts My Scott's underdash brake pedal set up , how cool is that ! Steering knuckles Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-21-2013, 02:17 PM	#658
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Wow......i am pumped ! Thanks justin ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-21-2013, 02:19 PM	#659
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy and a BIG THANK YOU TO CPP ! Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-21-2013, 02:30 PM	#661
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,367	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Is that Wilwood piece and adjustable prop? Part number? __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

01-21-2013, 02:31 PM	#662
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,367	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Man the TIG welding is over the top! Pure BLING there! __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

01-21-2013, 02:45 PM	#664
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,367	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Thanks! Beer for ya! I think its Guiness? __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

01-21-2013, 03:15 PM	#665
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Mike, congrats on the eninge fine. A friend just picked up 2005 5.3, trans and computor with 81,000 miles for $1200, which I thought was a great deal. Your front end looks great, my son and I installed one of their units in a 32 F**d, and it looks super...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

01-21-2013, 06:03 PM	#666
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy whoa! __________________ CHEVY ONLY... Nothin Else !

01-21-2013, 09:41 PM	#668
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Man nice stuff!...... __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

01-22-2013, 10:10 AM	#669
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Got the 5.3 all cleaned up and stripped down last night ! Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172



Register or Log In To remove these advertisements.

01-22-2013, 10:19 AM	#670
6772owner Gearhead Join Date: Jan 2008 Location: Colorado Posts: 1,193	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy I cant wait to see all that frame/drivetrain come together, loving the build buddy! __________________ 2002 Saturn SL2, My D/D 2019 Ford Fusion SE, Ecoboost - Wife's D/D 1993 Camaro Z28, A4, CAI, Cat-Back Exhaust Project C10 (my 72' C10 w/96' LT1, 700R4, bagged F&R, 18's (for now), Short/Fleet) -- SOLD! Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=313644

01-22-2013, 10:59 AM	#671
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Thanks man , i am pumped also ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-22-2013, 11:15 AM	#672
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy thats a real steal of an engine , i informed once about a truckversion of a 6.0 (LQ) and the guy wanted 5000 euro sure would safe some cash to live in the states where those engines are a little more common __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

01-22-2013, 11:38 AM	#673
LEEVON Registered User Join Date: Jul 2006 Location: Ozark, MO Posts: 4,887	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Comp cams 212/218 with .522/.529 lift LS6 valve springs 7.4" hardened push rods Easy on the wallet, mo' powah! __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

01-22-2013, 11:39 AM	#674
LEEVON Registered User Join Date: Jul 2006 Location: Ozark, MO Posts: 4,887	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy Oh yeah, how on earth did you get that thing so clean? __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

01-22-2013, 11:50 AM	#675
DrppdBlazr Registered User Join Date: Dec 2012 Location: Mesa, AZ Posts: 276	Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy probably was power washed...when I got my 5.3 it was pretty clean then we degreased and power washed it and it looked brand new. Builds coming along good man...

Register or Log In To remove these advertisements.