72 K30 Build

[rgunlock]

Lot of time to clean and paint all the small parts, but it all adds up to a nice finished look. I've discovered that this attention is needed even for brand new parts. Got a new brake booster and master cylinder for my truck. Assumed they were coated, and they looked coated but are now covered in surface rust.

[deejaaa1]

making great progress.

[7dee2]

Thank’s, deejaaa1!


Cab parts have been outside soaking up the UV light, some stuff is getting really close to paint. The hood is the first to get to 400 grit, cab also ended up outside after these pics were taken.

My friend’s guard dog (Ozzy) is thinking about peeing on Mrs. 7dee2’s clean car, but decided not too after I yelled at him!

[First c10]

Nice looking Brett. Keep up the hard work.

[7dee2]

Thank’s, Scott! I really can’t take any cred as I’m still banned from the painting process. When I asked to help again, it was like do us both a favor and leave it alone!


Mocked up the S6 compressor to see if the original brackets would fit OK, I’ve read some people had issues. The only modification that we needed was adding a thick washer on the rear lower pivot point.

[7dee2]

Not too excited about the cheapo metric hardware that came with the compressor. Replaced it all with, you guessed it flange bolts!

[Dieselwrencher]

Very nice!

[7dee2]

Thank’s Ryan!

This ECP/Entropy radiator showed up and I’ve been on the fence about it? I like the factory style look of the tanks, it was a great price and the quality is pretty good also. We’ve had really good success with aluminum radiators in the past but I don’t like painting them if possible.

Thought we needed it but I seem to be changing my mind and will probably stick with the 4-core copper and brass we have been using. Time will tell if that is the right decision or not. The good news is we can use this aluminum one for our half ton project later and probably won't paint it.

[swamp rat]

The engine is looking pretty nice with the air conditioner stuff on it! I'd go stock radiator as long as it's good.

[Dieselwrencher]

That radiator does look pretty nice. Why not use it? Other than the stock appearing route you have going on.

[7dee2]

Originally Posted by swamp rat

The engine is looking pretty nice with the air conditioner stuff on it! I'd go stock radiator as long as it's good.

I agree Mike, 4-core it is for now! Ours is not an original Harrison but a very similar aftermarket. It’s been flushed twice and looks very good inside, held pressure and didn’t even think of getting hot during each phase of initial break in. With the high-volume water pump and the cooling jets, ugh, err fans how can it possible overheat!

Originally Posted by Dieselwrencher

That radiator does look pretty nice. Why not use it? Other than the stock appearing route you have going on.

I know it looks better than I thought it would to tell the you the truth. No really big reasons other than paint, it looks really good shiny, we like shiny! I’ll keep it polished (regardless) for the C10 which is slated to be more mild custom, aftermarket air, serpentine, show shiny, etc. To install it in the K30 we'd just need to change to the std. 2/3 core mounts which the C10 has already has (advertised as a 4-core replacement but it’s not) and plug the water pump as I would use the tank return. For two-fitty delivered, it’s a nice piece!



Ha, the cooling jets are mounted as well as the last pieces of the brake line to the master cylinder area. You know if the truck breaks down I can just turn on the fans to get us were we are going!

[First c10]

looking good as usual... Brett did you paint or powder coat the radiator support? Battery trays etc?

[7dee2]

That’s nice of you to say, Scott thanks. Core support is some heavy coats of that Zero-Rust paint over sand blasted metal just like the frame. Only difference is I sanded (prior) and cleared (after) a little on the frame and didn’t on the core support. Radiator is high heat VHT satin paint like the engine block and pulleys, etc. Battery trays and horns are also painted, Rust-oleum Canyon Black satin. Pretty sure the new fan shroud is powder, I believe.


While on the paint topic, we’ve got some white paint starting!

[rgunlock]

I know you must feel great about seeing final color!

[Dieselwrencher]

Oh, nice!

[swamp rat]

Nice!!

[Ts truck]

Hi I'm new here but have been following your build great job by the way. But I was curious about the zero rust paint. I am thinking about using it on my frame. Does it seem to be very durable as far as scratching and chiping? Did you use there Crystal clear clear coat on the frame?

[JJorgensen52]

Looking good, Brett! I really need to get my butt back in gear on my projects, you guys are making me look bad

[7dee2]

Originally Posted by rgunlock

I know you must feel great about seeing final color!

Oh, yeah Rick you got that right!

Originally Posted by Dieselwrencher

Oh, nice!

Thanks, Ryan

Originally Posted by swamp rat

Nice!!

Thanks, Mike

Originally Posted by Ts truck

Hi I'm new here but have been following your build great job by the way. But I was curious about the zero rust paint. I am thinking about using it on my frame. Does it seem to be very durable as far as scratching and chiping? Did you use there Crystal clear clear coat on the frame?

Welcome Ts truck and thanks for following along. The Zero-Rust seems to be pretty good so far, if I did it over I’d ask them about adding a hardener. We spot painted (bolts mostly) with their rattle can product after bolting the frame together and the sheen did not match, the easy solution was Rust-oleum satin clear in a rattle can. That stuff gave us an even sheen but scuffs pretty easy it’s a really light coat.

Originally Posted by JJorgensen52

Looking good, Brett! I really need to get my butt back in gear on my projects, you guys are making me look bad

Hey Jim, thanks! Hope all is well and your projects need you!



Here’s the hood a couple of days later after a cut and buff. It’s on its way to storage for now so we won’t be tripping over it!

[rgunlock]

The hood looks like it came out beautiful. I know there is a lot of work in that! I just spent the better part of a day doing just the color sanding on my hood repaint. Still have to buff it out. Your progress is amazing!

[swamp rat]

The paint is a dual stage color coat then clear coat?

[7dee2]

Originally Posted by rgunlock

The hood looks like it came out beautiful. I know there is a lot of work in that! I just spent the better part of a day doing just the color sanding on my hood repaint. Still have to buff it out. Your progress is amazing!

Thanks, Rick I’m very pleased, had to go back down to the storage unit looking for some parts (excuse) so I could admire it for a few minutes. After telling my buddy, he says “That’s weird!” , I said, “I know isn’t it!”. I’ll pass on your kind words.

Originally Posted by swamp rat

The paint is a dual stage color coat then clear coat?

Thought someone might ask and for my own information here’s a break down so far of the products used. DP90 epoxy, 3-4 more coats of high build primer with this filler and then roughly 4 more coats acrylic urethane single stage paint.



We’ve had really good luck with this paint on past projects so I'm a fan. Had the supplier bring in more base and did aquire a second gallon as it is slowly being phased out in favor of other products.

[swamp rat]

Ok, I would like to know how to cut and buff the single stage, I was under the impression it couldn't be done. I also need to get some high build primer in something other than a spray can, slick sand?

[mjensen]

Oh how exciting! It's coming right along! I'm hoping to be able to fire mine up here in a few weeks so that I can get some momentum on my side.

[7dee2]

Originally Posted by swamp rat

Ok, I would like to know how to cut and buff the single stage, I was under the impression it couldn't be done. I also need to get some high build primer in something other than a spray can, slick sand?

Mike lots of info here and some opinions from the HAMB on single stage paint and wet sanding.

https://www.google.com/search?q=how+...hrome&ie=UTF-8

http://www.jalopyjournal.com/forum/t...d-buff.682280/

Originally Posted by mjensen

Oh how exciting! It's coming right along! I'm hoping to be able to fire mine up here in a few weeks so that I can get some momentum on my side.

Thanks a lot Mike, I guarantee you will be motivated once it’s running!



Here’s another round of paint!