How about some pics of 67-72 Trucks - Page 27 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hoss72 · 11-16-2007, 11:43 AM

Thanks Longhorn, I sure do enjoy it.

806em55 · 11-20-2007, 02:16 PM

Here are a few pics of my 70 ive been working on for a better part of four years.

69swbman · 11-20-2007, 06:34 PM

this is my 1969 i picked up out of somones yard for 400 dollars he jus wanted it gone
350 and a saginaw 4 spd
way u see it the way i got it and believe it or not but not a rust bucket jus the rocker need replaced
-PROJECT OLD SKOOL-

torqo · 11-20-2007, 10:03 PM

Here's My 70 Short Stepside Just Back From The Body Shop!

**Shock_Me** · 11-21-2007, 06:13 AM

806em55, I really like your stepside! What rims are those?

Bennett68C10 · 11-21-2007, 02:01 PM

A few pictures of my baby, finally bagged it!

Bennett68C10 · 11-21-2007, 02:05 PM

The interior and motor

806em55 · 11-21-2007, 07:52 PM

Thank you so much Shock_Me. They are Colorado Customs (Whiskys). 22x9.5 in the rear and 20x8.5 in the front.

67on22's · 11-21-2007, 11:34 PM

1967 chev. C10
Air susp., 12' step notch in rear, 2 1/2' Z notch in front, body droped 2', and tuckin a set of 22' wheels.
The engine is a rebuilt 350 w/ a mid. idle cam and a gear drive, 4 barrel carb, eltc. fan and a surpentine belt out of a 90 Camero. The trans. is a 200r4 w/ overdrive and a 2 piece driveshaft.

racerman85 · 11-26-2007, 06:12 PM

Quote:

Originally Posted by 67on22's

1967 chev. C10
Air susp., 12' step notch in rear, 2 1/2' Z notch in front, body droped 2', and tuckin a set of 22' wheels.
The engine is a rebuilt 350 w/ a mid. idle cam and a gear drive, 4 barrel carb, eltc. fan and a surpentine belt out of a 90 Camero. The trans. is a 200r4 w/ overdrive and a 2 piece driveshaft.

i love the touch of flat black...

1sik7t2 · 12-02-2007, 02:25 PM

Hey 67on22's Is That The Same Truck In Both Pictures What Show Were These @????? Bad Ass Muther Siiiiiiiiiiiiiiik

torqo · 12-02-2007, 03:46 PM

Yes, Jesse is a little exspensive, but for the amount of work he did on this truck it was well worth it. I have it at El Cajon Auto Trim getting the interior done today. I'll post pictures when i get it Back.

wangrande · 12-02-2007, 10:11 PM

I am in El Cajon also! Small world. I have lived here for 44 years.

Jon

sickred72 · 12-03-2007, 12:39 AM

here you go more pics!!!!!!!

wangrande · 12-01-2007, 03:36 AM

Here is my 72 3/4 ton camper special. Found it garaged for more than a decade. Runs great. Posted more in the 4X4 forum. 140K original miles. Glad to be here.

FingerTight · 12-01-2007, 12:10 PM

Quote:

Originally Posted by wangrande

Here is my 72 3/4 ton camper special. Found it garaged for more than a decade. Runs great. Posted more in the 4X4 forum. 140K original miles. Glad to be here.

droooooooolllllll what a nice truck, congrats

sickred72 · 12-01-2007, 08:33 PM

just sold it and im building a 68 swb 427, 20's etc

CHYNSPR · 12-02-2007, 09:17 AM

Wow, very nice! Any more pics, side view, rear view, interior...

CHYNSPR · 12-03-2007, 10:38 AM

Thanks for those, super nice truck, looking forward to seeing the new project...

Ol'Rover · 12-06-2007, 03:15 PM

Hi im new, heres my project. 1971 C10
This is a first photo of what it looks like now.

Here is a render of what i hope it will look like

we have a long way to go, but when done it wil lbe the best Daily driver i could ever want.

blukangoo · 12-06-2007, 03:48 PM

Quote:

Originally Posted by Ol'Rover

Here is a render of what i hope it will look like

Welcome to the forum from Germany.
Good job on your rendering.
Hope you can realize it.

MASONMAN · 12-07-2007, 11:50 PM

Well,I guess its time to finally post some pics of my 71 C-10[/B]

nismott · 12-08-2007, 02:40 PM

Name: 71 truck.jpg
Views: 8199
Size: 50.1 KB

Name: CIMG1621 small 2.jpg
Views: 8198
Size: 43.1 KB

1971 C10 LWB
5.3L vortec
Airbags and C6 vette rims

Still have a ways to go

gabromero · 02-28-2008, 04:09 AM

C10 69 long bed Querétaro, México.

Kenneth_CS87 · 12-09-2007, 09:18 PM

11-16-2007, 11:43 AM	#1
Hoss72 Registered User Join Date: Oct 2007 Location: San Antonio TX Posts: 124	Re: Post Your Ride 67-72 Trucks Thanks Longhorn, I sure do enjoy it.

11-20-2007, 02:16 PM	#2
806em55 Registered User Join Date: Oct 2007 Location: Lubbock TX Posts: 160	Re: Post Your Ride 67-72 Trucks Here are a few pics of my 70 ive been working on for a better part of four years. Attached Images Last edited by 806em55; 11-20-2007 at 02:18 PM.

11-20-2007, 06:34 PM	#3
69swbman Registered User Join Date: Jun 2007 Location: peaster,tx Posts: 59	Re: Post Your Ride 67-72 Trucks this is my 1969 i picked up out of somones yard for 400 dollars he jus wanted it gone 350 and a saginaw 4 spd way u see it the way i got it and believe it or not but not a rust bucket jus the rocker need replaced -PROJECT OLD SKOOL- Attached Images

11-20-2007, 10:03 PM	#4
torqo Registered User Join Date: Nov 2007 Location: El Cajon California Posts: 7	Re: Post Your Ride 67-72 Trucks Here's My 70 Short Stepside Just Back From The Body Shop!

11-21-2007, 06:13 AM	#5
Shock_Me Registered User Join Date: May 2005 Location: New Brunswick, Canada Posts: 585	Re: Post Your Ride 67-72 Trucks 806em55, I really like your stepside! What rims are those?

11-21-2007, 02:01 PM	#6
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Post Your Ride 67-72 Trucks A few pictures of my baby, finally bagged it! Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

11-21-2007, 02:05 PM	#7
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Post Your Ride 67-72 Trucks The interior and motor Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

11-21-2007, 07:52 PM	#8
806em55 Registered User Join Date: Oct 2007 Location: Lubbock TX Posts: 160	Re: Post Your Ride 67-72 Trucks Thank you so much Shock_Me. They are Colorado Customs (Whiskys). 22x9.5 in the rear and 20x8.5 in the front.

11-21-2007, 11:34 PM	#9
67on22's Registered User Join Date: Nov 2007 Location: Clovis, CA. Posts: 5	Re: Post Your Ride 67-72 Trucks 1967 chev. C10 Air susp., 12' step notch in rear, 2 1/2' Z notch in front, body droped 2', and tuckin a set of 22' wheels. The engine is a rebuilt 350 w/ a mid. idle cam and a gear drive, 4 barrel carb, eltc. fan and a surpentine belt out of a 90 Camero. The trans. is a 200r4 w/ overdrive and a 2 piece driveshaft. Attached Images __________________

12-02-2007, 02:25 PM	#11
1sik7t2 dave Join Date: Jul 2007 Location: el cajon Posts: 558	Re: Post Your Ride 67-72 Trucks Hey 67on22's Is That The Same Truck In Both Pictures What Show Were These @????? Bad Ass Muther Siiiiiiiiiiiiiiik __________________ check out my build "DIRTY BURB"

12-02-2007, 03:46 PM	#12
torqo Registered User Join Date: Nov 2007 Location: El Cajon California Posts: 7	Re: Post Your Ride 67-72 Trucks Yes, Jesse is a little exspensive, but for the amount of work he did on this truck it was well worth it. I have it at El Cajon Auto Trim getting the interior done today. I'll post pictures when i get it Back. __________________ 70 short step 5.7L TPI Fuel Injected 2004 Cadillac Escalade 2005 Chevy 2500HD Duramax

12-02-2007, 10:11 PM	#13
wangrande Registered User Join Date: Nov 2007 Location: San Diego CA Posts: 8	Re: Post Your Ride 67-72 Trucks I am in El Cajon also! Small world. I have lived here for 44 years. Jon

12-03-2007, 12:39 AM	#14
sickred72 Registered User Join Date: Oct 2005 Location: oregon Posts: 204	Re: Post Your Ride 67-72 Trucks here you go more pics!!!!!!! Attached Images

12-01-2007, 03:36 AM	#15
wangrande Registered User Join Date: Nov 2007 Location: San Diego CA Posts: 8	Re: Post Your Ride 67-72 Trucks Here is my 72 3/4 ton camper special. Found it garaged for more than a decade. Runs great. Posted more in the 4X4 forum. 140K original miles. Glad to be here. Attached Images

12-01-2007, 08:33 PM	#17
sickred72 Registered User Join Date: Oct 2005 Location: oregon Posts: 204	Re: Post Your Ride 67-72 Trucks just sold it and im building a 68 swb 427, 20's etc Attached Images



Register or Log In To remove these advertisements.

12-02-2007, 09:17 AM	#18
CHYNSPR Registered User Join Date: Jan 2006 Location: Grande Prairie, Alberta Posts: 202	Re: Post Your Ride 67-72 Trucks Wow, very nice! Any more pics, side view, rear view, interior...

12-03-2007, 10:38 AM	#19
CHYNSPR Registered User Join Date: Jan 2006 Location: Grande Prairie, Alberta Posts: 202	Re: Post Your Ride 67-72 Trucks Thanks for those, super nice truck, looking forward to seeing the new project...

12-06-2007, 03:15 PM	#20
Ol'Rover Project: years too late. Join Date: Dec 2007 Location: Almonte,ON,Canada Posts: 550	Re: Post Your Ride 67-72 Trucks Hi im new, heres my project. 1971 C10 This is a first photo of what it looks like now. Here is a render of what i hope it will look like we have a long way to go, but when done it wil lbe the best Daily driver i could ever want.

12-07-2007, 11:50 PM	#22
MASONMAN Registered User Join Date: Feb 2007 Location: GERING NEBRASKA Posts: 13	Re: Post Your Ride 67-72 Trucks Well,I guess its time to finally post some pics of my 71 C-10[/B] Attached Images

12-08-2007, 02:40 PM	#23
nismott Registered User Join Date: Mar 2007 Location: San Diego Posts: 3	Re: Post Your Ride 67-72 Trucks 1971 C10 LWB 5.3L vortec Airbags and C6 vette rims Still have a ways to go

02-28-2008, 04:09 AM	#24
gabromero Registered User Join Date: Dec 2007 Location: Queretaro Mexico Posts: 17	Re: Post Your Ride 67-72 Trucks C10 69 long bed Querétaro, México. Attached Images

12-09-2007, 09:18 PM	#25
Kenneth_CS87 Registered User Join Date: Jun 2006 Location: Stockton Posts: 114	Re: Post Your Ride 67-72 Trucks Last edited by Kenneth_CS87; 12-09-2007 at 09:24 PM. Reason: add pics..

Register or Log In To remove these advertisements.