Boyd Welding-67-72 Rear Mount Aluminum Tank - Page 27 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

msgross · 07-10-2013, 01:12 AM

amazing how popular these have become... I helped design the first tank that Dave started making for our trucks. Others have kits out there but the prices are way higher...

BTW, I still have mine sitting in storage! I like the newer designs with the curved rear portion.

**Clyde65** · 07-10-2013, 08:31 AM

I got one a year+ ago, it fit like a glove and has worked flawlessly since. I replaced a poly tank that worked but wasn't very big or nice to look at.

If I remember correctly, all group buys are through Pro Performance guys, yes you can go through Dave's website to purchase, but I think PP has the GB.

Good luck to all!

chevyguy_72 · 07-10-2013, 11:36 AM

Quote:

Originally Posted by Clyde65

I got one a year+ ago, it fit like a glove and has worked flawlessly since. I replaced a poly tank that worked but wasn't very big or nice to look at.

If I remember correctly, all group buys are through Pro Performance guys, yes you can go through Dave's website to purchase, but I think PP has the GB.

Good luck to all!

Actually Dave posted back on the 1st that he was thinking of doing the group buy this month...

kpc01 · 07-11-2013, 09:12 AM

Quote:

Originally Posted by Clyde65

I got one a year+ ago, it fit like a glove and has worked flawlessly since. I replaced a poly tank that worked but wasn't very big or nice to look at.

If I remember correctly, all group buys are through Pro Performance guys, yes you can go through Dave's website to purchase, but I think PP has the GB.

Good luck to all!

Clyde,

My frame should be the same as yours so good to know it will mount up. refresh my memory, how low is your truck? Also any idea on how low the tank hangs below the frame? Hoping to go all the way down with porterbuilt so thinking I may have to mount the tank inside the frame rails for a little extra clearance, but curious about how low it hangs below the frame on yours?

**Clyde65** · 07-11-2013, 10:03 AM

Quote:

Originally Posted by kpc01

Clyde,

My frame should be the same as yours so good to know it will mount up. refresh my memory, how low is your truck? Also any idea on how low the tank hangs below the frame? Hoping to go all the way down with porterbuilt so thinking I may have to mount the tank inside the frame rails for a little extra clearance, but curious about how low it hangs below the frame on yours?

My truck is about 4.5-5" dropped in the back. It hangs about 4 or so inches below the rails IIRC. If you have your bed off and you are planning on raising the bed floor, you could mount it on top of the rails. Ill try and get you a pic of the tank and the placement in the morning.

C20-67_N_MO · 07-11-2013, 10:22 AM

Quote:

Originally Posted by mfm3

Seriously interested and ready to pull the trigger.

Quote:

Originally Posted by Sammy

Likewise.. Dave no more teaser posts lets roll, awaiting your post.

I'm with you guys as well.

Gonna give until Monday July 15, 2013 then I'm out.

kpc01 · 07-11-2013, 10:56 PM

Quote:

Originally Posted by Clyde65

My truck is about 4.5-5" dropped in the back. It hangs about 4 or so inches below the rails IIRC. If you have your bed off and you are planning on raising the bed floor, you could mount it on top of the rails. Ill try and get you a pic of the tank and the placement in the morning.

Thanks Clyde,

Mines a suburban so trying to keep the floor back there as low as I can, but can probably adjust it if I had to. I guess I'll just have to give it a try to see how high i can get it wth the stock floor. My current tank is about 13" tall and is right at the floor. thanks for the info!

Tuffy66 · 07-12-2013, 11:12 PM

I was going to buy one from Boyd tonight but if I have to wait to get it cheaper..I'm in on the group buy

C10_ustacould · 07-10-2013, 08:58 PM

Is this going to happen?

**mfm3** · 07-11-2013, 02:13 AM

Seriously interested and ready to pull the trigger.

Sammy · 07-11-2013, 08:46 AM

Likewise.. Dave no more teaser posts lets roll, awaiting your post.

C20-67_N_MO · 07-15-2013, 10:02 AM

SWEET!

Thanks Dave.

I'm sure everyone that is interested will take advantage of this offer.

blazed870 · 07-15-2013, 10:39 AM

ordered, thanks!. I ordered 0-90 ohm sender with it, that works with the painless wiring and stock gauges right?

Sammy · 07-15-2013, 11:19 AM

Placed order..Thanxs

Pro Performance · 07-15-2013, 11:38 AM

Dave has worked with us on this group buy as well, and we will be offering the same pricing through our website. Just enter the same coupon code: 6772GB13

http://www.azproperformance.com/Boyd...nks-67-72-C10/

If you will be purchasing other items from us and calling in, just let us know and we will make sure to extend this deal to you.

Thanks

- Travis

chevyguy_72 · 07-15-2013, 11:54 AM

What is the benefit of the a1000 tank vs the stealth?
Thanks

**Daveboyd** · 07-15-2013, 05:22 PM

Quote:

Originally Posted by chevyguy_72

What is the benefit of the a1000 tank vs the stealth?
Thanks

The A1000 and stealth 340 are totally different pumps.

the stealth 340 is best used in EFI applications under 600 HP. It runs perfect with LS style engines.

The A1000 is used when HP is between 600 and 1300HP and when running turbos, superchargers or lots of nitrous.

chevyguy_72 · 07-15-2013, 09:42 PM

If I buy the stealth tank/pump is it upgradeable to the A1000 pump at a later time? or is the tank totally different?

Is the a1000 tank available in a side fill?

Thanks

Quote:

Originally Posted by Daveboyd

The A1000 and stealth 340 are totally different pumps.

the stealth 340 is best used in EFI applications under 600 HP. It runs perfect with LS style engines.

The A1000 is used when HP is between 600 and 1300HP and when running turbos, superchargers or lots of nitrous.

**Daveboyd** · 07-16-2013, 08:28 AM

Quote:

Originally Posted by chevyguy_72

If I buy the stealth tank/pump is it upgradeable to the A1000 pump at a later time? or is the tank totally different?

Is the a1000 tank available in a side fill?

Thanks

The tank structure, pump opening and bolt pattern are totally different so there is no way to upgrade to the A-1000 From the stealth 340.

yes, the A1000 is available in side fill. I will add that option to the website this morning.

chevyguy_72 · 07-16-2013, 10:54 AM

Quote:

Originally Posted by Daveboyd

The tank structure, pump opening and bolt pattern are totally different so there is no way to upgrade to the A-1000 From the stealth 340.

yes, the A1000 is available in side fill. I will add that option to the website this morning.

The stealth tank would fulfill my needs for now... BUT... I am wanting to possibly go Supercharged in the future... So I am thinking A1000 tank...
Would it be any issue to use this tank/pump on the non 600 hp engine for a yr or 2 until I get the SC added? extra stain on the pump or possibly the fuel system on the engine since it does push a higher volume of fuel?

Thanks

C10_ustacould · 07-15-2013, 05:55 PM

My order is in, thanks Dave!!

darkhorse970 · 07-15-2013, 10:07 PM

I just placed an order on your website for a Side Fill Standard tank. I added a Sending Unit and Rollover Vent, as well as the powdercoat option. I would like to be able to convert to EFI in the future, so please provision the tank for the Return Line also. Please call me if there are any questions about my requests above. My name is Keith Cromwell, thanks.

**Daveboyd** · 07-16-2013, 08:29 AM

Quote:

Originally Posted by darkhorse970

I just placed an order on your website for a Side Fill Standard tank. I added a Sending Unit and Rollover Vent, as well as the powdercoat option. I would like to be able to convert to EFI in the future, so please provision the tank for the Return Line also. Please call me if there are any questions about my requests above. My name is Keith Cromwell, thanks.

Keith,

The return fitting is standard on all tanks. Thanks for your order.

Bennett68C10 · 07-16-2013, 11:49 AM

Just ordered mine, thanks again for the group buy.
Posted via Mobile Device

chevyguy_72 · 07-16-2013, 10:36 PM

Also another question about the side fill tanks?
when installed as designed does the fill tube fit between the bed and the frame or is a notch or something required?
Thanks

07-10-2013, 01:12 AM	#1
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank amazing how popular these have become... I helped design the first tank that Dave started making for our trucks. Others have kits out there but the prices are way higher... BTW, I still have mine sitting in storage! I like the newer designs with the curved rear portion. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

07-10-2013, 08:31 AM	#2
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,545	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I got one a year+ ago, it fit like a glove and has worked flawlessly since. I replaced a poly tank that worked but wasn't very big or nice to look at. If I remember correctly, all group buys are through Pro Performance guys, yes you can go through Dave's website to purchase, but I think PP has the GB. Good luck to all! __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

07-12-2013, 11:12 PM	#8
Tuffy66 Registered User Join Date: Apr 2008 Location: Westhope, ND Posts: 19	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I was going to buy one from Boyd tonight but if I have to wait to get it cheaper..I'm in on the group buy

07-10-2013, 08:58 PM	#9
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Is this going to happen? __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

07-11-2013, 02:13 AM	#10
mfm3 Active Member Join Date: Feb 2013 Location: DFW TX Posts: 133	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Seriously interested and ready to pull the trigger.

07-11-2013, 08:46 AM	#11
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Likewise.. Dave no more teaser posts lets roll, awaiting your post. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

07-15-2013, 10:02 AM	#12
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank SWEET! Thanks Dave. I'm sure everyone that is interested will take advantage of this offer. __________________ Coming Soon: Project 1970 Country Truck

07-15-2013, 10:39 AM	#13
blazed870 Registered User Join Date: Jan 2009 Location: Bakersfield, CA Posts: 47	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank ordered, thanks!. I ordered 0-90 ohm sender with it, that works with the painless wiring and stock gauges right?

07-15-2013, 11:19 AM	#14
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Placed order..Thanxs __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"

07-15-2013, 11:38 AM	#15
Pro Performance Registered User Join Date: Aug 2010 Location: AZ Posts: 3,069	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dave has worked with us on this group buy as well, and we will be offering the same pricing through our website. Just enter the same coupon code: 6772GB13 http://www.azproperformance.com/Boyd...nks-67-72-C10/ If you will be purchasing other items from us and calling in, just let us know and we will make sure to extend this deal to you. Thanks - Travis

07-15-2013, 11:54 AM	#16
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Broomfield, CO Posts: 956	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank What is the benefit of the a1000 tank vs the stealth? Thanks

07-15-2013, 05:55 PM	#21
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank My order is in, thanks Dave!! __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

07-15-2013, 10:07 PM	#22
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,105	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I just placed an order on your website for a Side Fill Standard tank. I added a Sending Unit and Rollover Vent, as well as the powdercoat option. I would like to be able to convert to EFI in the future, so please provision the tank for the Return Line also. Please call me if there are any questions about my requests above. My name is Keith Cromwell, thanks. __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941 Last edited by darkhorse970; 07-15-2013 at 11:08 PM.

07-16-2013, 11:49 AM	#24
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Just ordered mine, thanks again for the group buy. Posted via Mobile Device

07-16-2013, 10:36 PM	#25
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Broomfield, CO Posts: 956	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Also another question about the side fill tanks? when installed as designed does the fill tube fit between the bed and the frame or is a notch or something required? Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.