Its Mine the World Famous 67 Dragtruck - Page 27 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

leftcoast66 · 12-09-2008, 09:00 PM

Quote:

Originally Posted by Lx3

I don't know why you would want a truck that picks up and runs that

straight. Crooked and twisty makes better pictures. LMAO

Hey, check out what I scored for "FREE" I love my freinds.

Very nice, got a set of those too. Same guy who gave me mine gave me a L79 corvette winters intake manifold.

Lx3 · 12-10-2008, 09:57 AM

Hey leftcoast,

Do you happen to know what year these came on ? Just

curious, the bolt holes are offset if that helps. They're going on a

set of pretty nice 034 heads with shaft mount rockers. Don't tell

anyone, it's a secret.

leftcoast66 · 12-10-2008, 04:30 PM

Quote:

Originally Posted by Lx3

Hey leftcoast,

Do you happen to know what year these came on ? Just

curious, the bolt holes are offset if that helps. They're going on a

set of pretty nice 034 heads with shaft mount rockers. Don't tell

anyone, it's a secret.

Should be early 1960's vettes. Not sure what year they stopped putting them on the cars, but I know it was the late 80's when they stopped making them at GM, the set I got were the last at the dealer and my stepgrandpa had to have them. Sadly I threw away the boxes they came in w/ the part numbers.

Lx3 · 12-12-2008, 09:23 AM

I found it. They came on 55 to 59.

phipp13 · 12-16-2008, 12:52 AM

my bad on the extra 10 ft it's been almost 20 years since i've crossed that stripe! it won't be another year though. 09 i'll have some video and #s hopfully 1/2 way respectfull #s

djracer · 12-16-2008, 07:36 AM

good luck with your times I was just pickin at you about the 10 ft.

Lx3 · 12-16-2008, 08:26 AM

Hey,

Think I'm gonna' try the 4-7 cam swap. I've got a freind picked up

2 tenths and says it takes some harmonics out.

Any thoughts or comments ?

watahyahknow · 12-16-2008, 10:21 AM

there was a story about it in the hot rod a while ago and i seriously considering doing the same

djracer · 12-16-2008, 11:33 AM

My next cam is a 4/7 swap!

Lx3 · 12-17-2008, 08:59 AM

70rs/ss talked me out of the extra $$$ for the street but for the

track I don't see passing.

Did I mention my freind picked up 2-tenths. And he's NO ROOKIE

djracer · 12-19-2008, 09:14 AM

Cross your fingers guys I took a 502 block to the machine shop yesterday hoping it will clear at .030. With my stroker crank that will make a 548.

watahyahknow · 12-20-2008, 09:55 PM

fingers and toes crossed ....... let me know wat happened

djracer · 12-22-2008, 01:51 PM

Block is fine we are gonna have a 548 in there by spring.

phipp13 · 12-22-2008, 02:04 PM

it's gonna be nasty! if i get back down to panama city fl for work i'll hit ya up and make a road trip your way. phipp

djracer · 12-22-2008, 02:14 PM

Quote:

Originally Posted by phipp13

it's gonna be nasty! if i get back down to panama city fl for work i'll hit ya up and make a road trip your way. phipp

Cool.

shortbed70 · 12-29-2008, 07:54 PM

glad to hear it wasn't junk, good luck

djracer · 01-05-2009, 08:52 AM

I actually did some trading and got a bowtie block so if it checks out I may run it to keep from having to run gen VI stuff. The gen Vi block is already bored but the guy it belongs to really didn't want to sell it anyway so he may keep it for his boat if the bowtie block checks out.

This thread needed another post I wasn't liking how many it had.

a1953mdl · 01-19-2009, 12:03 AM

Quote:

Originally Posted by djracer

Those are sweet. It leaves twisted now but I'm gonna try to fix that!

What has happened to let it twist? What are your thoughts on keeping it from flexing?
Hope you have great luck with the new engine.
Lee

djracer · 01-19-2009, 01:24 PM

I'm gonna upgrade the anti roll bar to get it not to twist as much. It has twisted since I bought and Tom said it did this with him also.

watahyahknow · 01-19-2009, 02:06 PM

i've seen on a couple of ocasions they used an helper airbag inside the coil to counter that

djracer · 01-19-2009, 02:44 PM

that wouldn't work for me as I don't have coils. I have coilovers but I haven't tried stiffening the right shock but it might help a little.

watahyahknow · 01-19-2009, 07:43 PM

it would take some trail and error but you might want to experiment with heavier spring on one side instead twisting up the shock on one side might as this might end up unbalancing the truck halfway down the track do to the thumb when it hits bottom
or mount shockwaves (pricey)

kwhite4 · 01-21-2009, 11:34 AM

Hey DJ
Dont mean to change the subject but what RPM do you leave the line at?
I know track conditions are an issue but was curious about how much your able to put down without getting scary.

Thanks

djracer · 01-21-2009, 12:59 PM

I have a pretty tight convertor so I don't have a huge window to work with. I have left from 3000 to 4000. 4000 is up againest the convertor. The truck actually like more power on the starting line. With the bigger slicks (33x10.5w's) it would take all I could throw at it. I left on 250 and 300 shots of spray. Tom actually left on 2 kits with a 31x10.5w.

hotrod 80 · 01-21-2009, 01:04 PM

Quote:

Originally Posted by a1953mdl

What has happened to let it twist? What are your thoughts on keeping it from flexing?
Hope you have great luck with the new engine.
Lee

It looks twisted and may be some what , but more than anything it is the axles natural rotation under power . The driverside tire is drivin into the ground and the passengerside tire is being lifted as the pinion is forced to rotate . Anti sway gets rid of most of this .

12-10-2008, 09:57 AM	#652
Lx3 Registered User Join Date: Nov 2008 Location: Ponder, Texas Posts: 94	Re: Its Mine the World Famous 67 Dragtruck Hey leftcoast, Do you happen to know what year these came on ? Just curious, the bolt holes are offset if that helps. They're going on a set of pretty nice 034 heads with shaft mount rockers. Don't tell anyone, it's a secret.

12-12-2008, 09:23 AM	#654
Lx3 Registered User Join Date: Nov 2008 Location: Ponder, Texas Posts: 94	Re: Its Mine the World Famous 67 Dragtruck I found it. They came on 55 to 59.

12-16-2008, 12:52 AM	#655
phipp13 THE DAMN YANKEE Join Date: Sep 2006 Location: Southern MD Posts: 551	Re: Its Mine the World Famous 67 Dragtruck my bad on the extra 10 ft it's been almost 20 years since i've crossed that stripe! it won't be another year though. 09 i'll have some video and #s hopfully 1/2 way respectfull #s

12-16-2008, 07:36 AM	#656
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck good luck with your times I was just pickin at you about the 10 ft. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

12-16-2008, 08:26 AM	#657
Lx3 Registered User Join Date: Nov 2008 Location: Ponder, Texas Posts: 94	Re: Its Mine the World Famous 67 Dragtruck Hey, Think I'm gonna' try the 4-7 cam swap. I've got a freind picked up 2 tenths and says it takes some harmonics out. Any thoughts or comments ?

12-16-2008, 10:21 AM	#658
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Its Mine the World Famous 67 Dragtruck there was a story about it in the hot rod a while ago and i seriously considering doing the same __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

12-16-2008, 11:33 AM	#659
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck My next cam is a 4/7 swap! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

12-17-2008, 08:59 AM	#660
Lx3 Registered User Join Date: Nov 2008 Location: Ponder, Texas Posts: 94	Re: Its Mine the World Famous 67 Dragtruck 70rs/ss talked me out of the extra $$$ for the street but for the track I don't see passing. Did I mention my freind picked up 2-tenths. And he's NO ROOKIE

12-19-2008, 09:14 AM	#661
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck Cross your fingers guys I took a 502 block to the machine shop yesterday hoping it will clear at .030. With my stroker crank that will make a 548. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

12-20-2008, 09:55 PM	#662
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Its Mine the World Famous 67 Dragtruck fingers and toes crossed ....... let me know wat happened __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

12-22-2008, 01:51 PM	#663
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck Block is fine we are gonna have a 548 in there by spring. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

12-22-2008, 02:04 PM	#664
phipp13 THE DAMN YANKEE Join Date: Sep 2006 Location: Southern MD Posts: 551	Re: Its Mine the World Famous 67 Dragtruck it's gonna be nasty! if i get back down to panama city fl for work i'll hit ya up and make a road trip your way. phipp

12-29-2008, 07:54 PM	#666
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: Its Mine the World Famous 67 Dragtruck glad to hear it wasn't junk, good luck __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

01-05-2009, 08:52 AM	#667
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck I actually did some trading and got a bowtie block so if it checks out I may run it to keep from having to run gen VI stuff. The gen Vi block is already bored but the guy it belongs to really didn't want to sell it anyway so he may keep it for his boat if the bowtie block checks out. This thread needed another post I wasn't liking how many it had. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

01-19-2009, 01:24 PM	#669
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck I'm gonna upgrade the anti roll bar to get it not to twist as much. It has twisted since I bought and Tom said it did this with him also. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!



Register or Log In To remove these advertisements.

01-19-2009, 02:06 PM	#670
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Its Mine the World Famous 67 Dragtruck i've seen on a couple of ocasions they used an helper airbag inside the coil to counter that __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

01-19-2009, 02:44 PM	#671
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck that wouldn't work for me as I don't have coils. I have coilovers but I haven't tried stiffening the right shock but it might help a little. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

01-19-2009, 07:43 PM	#672
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Its Mine the World Famous 67 Dragtruck it would take some trail and error but you might want to experiment with heavier spring on one side instead twisting up the shock on one side might as this might end up unbalancing the truck halfway down the track do to the thumb when it hits bottom or mount shockwaves (pricey) __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts Last edited by watahyahknow; 01-19-2009 at 07:47 PM.

01-21-2009, 11:34 AM	#673
kwhite4 Junior Member Join Date: Oct 2004 Location: Gatesville texas Posts: 180	Re: Its Mine the World Famous 67 Dragtruck Hey DJ Dont mean to change the subject but what RPM do you leave the line at? I know track conditions are an issue but was curious about how much your able to put down without getting scary. Thanks __________________ 68 GMC 565 BBC Abruzzi super pro glide 9.85@135.00

01-21-2009, 12:59 PM	#674
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Its Mine the World Famous 67 Dragtruck I have a pretty tight convertor so I don't have a huge window to work with. I have left from 3000 to 4000. 4000 is up againest the convertor. The truck actually like more power on the starting line. With the bigger slicks (33x10.5w's) it would take all I could throw at it. I left on 250 and 300 shots of spray. Tom actually left on 2 kits with a 31x10.5w. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

Register or Log In To remove these advertisements.