Do you need '64-'66 Chevy Truck Parts?

[19GMC63]

Tony,
Do you have this clutch pedal arm linkage thing? Mine wore out... I'm not sure if it's factory though. Also, that upper linkage piece that connects to the arm also. (http://67-72chevytrucks.com/vboard/s...d.php?t=343063)



thanks

[LILRED66]

Originally Posted by duallyjams

pm sent

I received your PM and payment. Thanks for your business.

[Tx Firefighter]

Tony, did my frame piece and crossmember ever ship out ?

[red7218]

Hi, do you have a Hallander interchange booK. I am looking for a pair of wheel hubs that fit a 1962 (tapered roller bearings). I suspect they are the same as the years you deal in. If you have them I need um. Thanks Marshall

[LILRED66]

Originally Posted by Tx Firefighter

Tony, did my frame piece and crossmember ever ship out ?

Kevin:

Thanks for the follow-up. Last week was a bear...finishing up with one swap meet and getting ready for another one, so only shipped a portion of my truck parts orders last week. I will be shipping again this week, so your's will go out this week. I have to butcher a chassis for your items, so I will have a little time getting the parts cut off and packaged.

Sorry for my delay and thanks for your patience.

[283 Man]

Im guessing you dont have a 3 speed 350 turbo transmission.. thanks anyway..

[Tx Firefighter]

Originally Posted by LILRED66

Kevin:

Thanks for the follow-up. Last week was a bear...finishing up with one swap meet and getting ready for another one, so only shipped a portion of my truck parts orders last week. I will be shipping again this week, so your's will go out this week. I have to butcher a chassis for your items, so I will have a little time getting the parts cut off and packaged.

Sorry for my delay and thanks for your patience.

I'd appreciate you just refunding my paypal. I thought you were going to ship it to me last week. I am tired of waiting. I will get the stuff locally.

[LILRED66]

Originally Posted by Tx Firefighter

I'd appreciate you just refunding my paypal. I thought you were going to ship it to me last week. I am tired of waiting. I will get the stuff locally.

Sorry I couldn't turn your parts around in five days. Refund complete. Good luck with your project.

[LILRED66]

Originally Posted by 283 Man

Im guessing you dont have a 3 speed 350 turbo transmission.. thanks anyway..

I don't have a 350 Turbo short shaft, but if I did the shipping would be more than the tranny, so you would be better off finding one locally.

[LILRED66]

Originally Posted by red7218

Hi, do you have a Hallander interchange booK. I am looking for a pair of wheel hubs that fit a 1962 (tapered roller bearings). I suspect they are the same as the years you deal in. If you have them I need um. Thanks Marshall

I don't Hollander Exchange manual, so I am not able to tell you if the '60-'66 are all the same. I have a set of front hubs from a '65, that have been refinished for a frame-off restoration, but we did a disk brake conversion instead. If you know for sure they will work, they are for sale.

[Bob'sK10CHEVY]

Hey Tony,
I'm looking for a 283 4bbl carburator and intake setup with breather. Have you got anything? Also would like to know where the best place is to get a four row desert cooler radiator for my 66?

[jkade]

I am looking for a dash out of a 61 or similiar years. Pm me a price shipped to 35960 if you have one.

Thanks, Kade

[red7218]

Red, how much for the hubs?

[duallyjams]

Originally Posted by LILRED66

I received your PM and payment. Thanks for your business.

I definitely went them but I have not sent the payment yet.I will send the payment this weekend.
James
just want to keep things on the up an up.

[LILRED66]

Originally Posted by Bob'sK10CHEVY

Hey Tony,
I'm looking for a 283 4bbl carburator and intake setup with breather. Have you got anything? Also would like to know where the best place is to get a four row desert cooler radiator for my 66?

Thanks for the inquiry. I don't have any factory 4-barrel carb/intake setups. I have sold two 4-barrel breathers in the past few weeks, so I am out of these, as well.

Thanks for the opportunity and please keep me in mind for other good, used 4-5-6 Chevy truck parts in the future.

[LILRED66]

Originally Posted by duallyjams

I definitely went them but I have not sent the payment yet.I will send the payment this weekend.
James
just want to keep things on the up an up.

James:

Thanks for the prompt reply. I checked my notes and PayPal, but was unable to find a record of payment, so thanks for the heads-up. Let me know and I will reply accordingly. Thanks.

[LILRED66]

Originally Posted by jkade

I am looking for a dash out of a 61 or similiar years. Pm me a price shipped to 35960 if you have one.

Thanks, Kade

Kade:

Good evening and thanks for the inquiry. I have a few good, used '60-'63 Chevy truck dashes. Are you looking for the dash cluster or the entire dash assmembly, that goes from "A" pillar to "A" pillar? Please let me know and I will reply accordingly.

[LILRED66]

Originally Posted by Bob'sK10CHEVY

Hey Tony,
I'm looking for a 283 4bbl carburator and intake setup with breather. Have you got anything? Also would like to know where the best place is to get a four row desert cooler radiator for my 66?

Bob:

I do have a few good, used factory Harrison 4-core radiators. I just had one re-cored, but it was $400.00, to do so. It looks like new and has the factory tranny line connections on the bottom tank for an automatic transmission. Also, I just purchased a 3-core from O'Reillys for around $200.00. This was after checking the offerings from LMC Truck and Classic Parts, since both are in the Kansas City area and I could visually inspect them before purchasing one. Needless to say, they say they are factory replacements, but the tanks are not even close, plus the cost was about double what I paid for the radiator from O'Reillys. If you are interested, please let me know and I will reply accordingly. Thanks for the opportunity.

[LILRED66]

Originally Posted by red7218

Red, how much for the hubs?

Are you just looking for the hubs or the entire hub assembly, including the brakes, drums, hubs and hoses? I have all of the above, so let me know what you need and I will reply accordingly. Thanks for the opportunity.

[jkade]

Originally Posted by LILRED66

Kade:

Good evening and thanks for the inquiry. I have a few good, used '60-'63 Chevy truck dashes. Are you looking for the dash cluster or the entire dash assmembly, that goes from "A" pillar to "A" pillar? Please let me know and I will reply accordingly.

I need the whole dash from pillar to pillar, I am not worried about the cluster, any of the knobs, radio, heater contols, etc but I would like to have the glove box door included. If it is not too much trouble the pedal bracket that mounts to the dash and firewall would be nice and maybe the column strap. My zip is 35960.

Thanks, Kade

[duallyjams]

Originally Posted by LILRED66

James:

Thanks for the prompt reply. I checked my notes and PayPal, but was unable to find a record of payment, so thanks for the heads-up. Let me know and I will reply accordingly. Thanks.

Ok I sent the payment this morning.
Thanks
James

[LILRED66]

Originally Posted by 64GMCHorsepower

1 - where is this place in the forums for get rid of free parts? I have looked, and PM'd a mod and have got no response...

2. Shouldn't you be a forum vendor? You are advertising your business and have a 1-2 year thread telling everyone you sell parts....that is not normal selling of unneeded parts...

The place on the site to offer parts for free is under the Parts for Sale thread, by starting your own thread, if you have parts to offer for free.

After several years of being a Site Supporter, my subscription was changed to a Site Vendor, without my consent and later changed back to Site Supporter, without my knowledge, so I don't have any control over that. By the way, I am an individual with a collection of 4-5-6 Chevy trucks and in the process and collecting and restoring them, I have acquired a massive amount of parts, so I offer them for sale. I don't operate as a business, however I am in the process of making that transition, since my primary business, commercial general contracting, has been rather slow.

Thanks for your opinion on the situation and let me know if I can help you with any good, used 4-5-6 Chevy truck parts in the future.

[64GMCHorsepower]

No problem, I just remember you as being a vendor at one time.

[rough 66]

Tony,
My wife picked me up a 66 while on deployment to the desert, however the hood is all rusted out. I am looking for hood that is in real good condition. I am also looking for the passenger side wing window assembly. I will need the complete frame and everything. I will be home in a couple weeks from deployment, and will be in Coffeyville, Ks around the 22nd of June. Any help you can give me will be greatly appreciated. If shipping is not too much my zip is 32068. Thanks for your help

Brian

[duallyjams]

Parts arrived,
Thanks
James