And so it begins................ - Page 27 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*highperf4x4* · 04-11-2010, 12:45 PM

Well, I changed the inlet filter on the Q-jet and tried to adjust the points a little bit and the truck was still cutting out last night at the cruise so it must be something else. I'm thinking about dropping the Mallory HEI in there that used to be in the 4x4.

sourkraut · 04-11-2010, 08:50 PM

nice build travis sorry i missed it.

JohnC · 04-12-2010, 03:57 PM

Quote:

Originally Posted by sourkraut

nice build travis sorry i missed it.

He's just getting started. You got here just in time.

my67chevytruck · 04-12-2010, 04:48 PM

we all know Travis doesnt make progress

*TheSebring* · 04-12-2010, 08:24 PM

Lol, look at the 7 month primered hood

*highperf4x4* · 04-12-2010, 10:20 PM

Quote:

Originally Posted by sourkraut

nice build travis sorry i missed it.

Thanks brother. It is a slow go!

Quote:

Originally Posted by JohnC

He's just getting started. You got here just in time.

Quote:

Originally Posted by my67chevytruck

we all know Travis doesnt make progress

Quote:

Originally Posted by TheSebring

Lol, look at the 7 month primered hood

wait a minute............. bite me!

**scotts62** · 04-13-2010, 07:56 AM

JohnC · 04-13-2010, 09:07 AM

*highperf4x4* · 04-18-2010, 12:24 AM

Here's some progress for you nay-sayers!!

Went out to Neils today and he and James and Steve helped me pull the trim, weld up some monster holes in the bed and even diagnose the my engine problem. James knocked the trim and clip situation and Neil welded up my bed and then whipped out his digital thermometer to find that the #6 cylinder was running about 100 degrees cooler than the rest so apparently the plug or wire is bad since the compression on that cylinder checked out fine last week.

*highperf4x4* · 04-18-2010, 12:26 AM

VA72C10 · 04-18-2010, 12:52 AM

Hey, that's what we call progress

**scotts62** · 04-18-2010, 09:37 AM

sourkraut · 04-18-2010, 10:58 AM

looking good, are you going to keep the trim off?

**scotts62** · 04-18-2010, 11:57 AM

Hey Travis where you at in any of those pics??

mcbassin · 04-18-2010, 12:21 PM

Making some progress on the GMC! SWeet!

*TheSebring* · 04-18-2010, 01:07 PM

I would assume he was behind his camera. Lol, afterall, he's the one who posted the pictures.

jojo · 04-18-2010, 02:17 PM

Lucky! I wish I had a "crew"

Me and my truck need to move to OK for a few weeks.

And ya'll can help me whip my ride into shape!

*highperf4x4* · 04-18-2010, 03:01 PM

Quote:

Originally Posted by VA72C10

Hey, that's what we call progress

Quote:

Originally Posted by sourkraut

looking good, are you going to keep the trim off?

No, the trim will be off for a while though and I will replace it with new pieces from Mar-K later on. I've been talking it over with James (bigmac68) already and he's given me tons of advice. The current plan is to shoot the truck solid green to make it look better and then work one spot at a time. Before the trim goes back on, it will go back to 2 tone paint.

Quote:

Originally Posted by scotts62

Hey Travis where you at in any of those pics??

Behind the camera. I did a little of everything as we all did with the exception of welding the holes. Nobody had the skills for that but Neil. We had fun and mostly just bs'ing. We were there all day until about 8:00pm

Quote:

Originally Posted by mcbassin

Making some progress on the GMC! SWeet!

Thanks

Quote:

Originally Posted by jojo

Lucky! I wish I had a "crew"

Me and my truck need to move to OK for a few weeks.

And ya'll can help me whip my ride into shape!

Yeah, these dudes around here are top notch. I'll even show you some pics of Scott working on the 4x4 as soon as I can find them!!

sourkraut · 04-18-2010, 03:10 PM

good deal i am really concidering put trim on mine. i was not going to till i saw how nice slick67's looks with it.

*highperf4x4* · 04-18-2010, 08:40 PM

Yeah I have to have the upper and lower trim and 2 tone paint on mine. They just don't look right without it.

*beechd18* · 04-18-2010, 08:45 PM

Did the rain wash the primer off yet?

**scotts62** · 04-18-2010, 08:47 PM

Quote:

Originally Posted by beechd18

Did the rain wash the primer off yet?

*highperf4x4* · 04-18-2010, 09:11 PM

Quote:

Originally Posted by beechd18

Did the rain wash the primer off yet?

No, it looks like it held up fine. I'm glad you made me wait a little bit before pulling it back out into the rain. I probably would have just taken off and ruined it.

Guess what though? Since I haven't picked up the vacum line from John yet my defroster wasn't working and I couldn't see for squat on the way home last night and coming into blanchard some jerkoff had his lights on bright and I couldn't see anything!! Some fog on the window and the glossy wet streets combined with my old headlights and I hit a freakin curb at like 50mph. It was that spot as your coming into town where it splits into 2 lanes and the right lane turns right. I could only make out the white line at the side of the road so I was trying to follow that and I didn't see that triangle shaped concrete section out in the road until the last minute. I tried to swerve left but I still hammered it with both rightside tires.

I can't tell that it hurt anything yet but I will have to look it over later.

VA72C10 · 04-18-2010, 09:24 PM

wow, hope everything is okay with the truck.

**scotts62** · 04-18-2010, 09:30 PM

Doh!! Ouchie

04-11-2010, 12:45 PM	#651
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ Well, I changed the inlet filter on the Q-jet and tried to adjust the points a little bit and the truck was still cutting out last night at the cruise so it must be something else. I'm thinking about dropping the Mallory HEI in there that used to be in the 4x4.

04-11-2010, 08:50 PM	#652
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: And so it begins................ nice build travis sorry i missed it. __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

04-12-2010, 04:48 PM	#654
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: And so it begins................ we all know Travis doesnt make progress __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

04-12-2010, 08:24 PM	#655
TheSebring Account Suspended Join Date: May 2009 Location: Noble,Ok Posts: 576	Re: And so it begins................ Lol, look at the 7 month primered hood

04-13-2010, 07:56 AM	#657
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: And so it begins................ __________________ Scott 93 crew cab build Project 62

04-13-2010, 09:07 AM	#658
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: And so it begins................

04-18-2010, 12:24 AM	#659
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ Here's some progress for you nay-sayers!! Went out to Neils today and he and James and Steve helped me pull the trim, weld up some monster holes in the bed and even diagnose the my engine problem. James knocked the trim and clip situation and Neil welded up my bed and then whipped out his digital thermometer to find that the #6 cylinder was running about 100 degrees cooler than the rest so apparently the plug or wire is bad since the compression on that cylinder checked out fine last week.

04-18-2010, 12:26 AM	#660
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................

04-18-2010, 12:52 AM	#661
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: And so it begins................ Hey, that's what we call progress __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-18-2010, 09:37 AM	#662
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: And so it begins................ __________________ Scott 93 crew cab build Project 62

04-18-2010, 10:58 AM	#663
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: And so it begins................ looking good, are you going to keep the trim off? __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

04-18-2010, 11:57 AM	#664
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: And so it begins................ Hey Travis where you at in any of those pics?? __________________ Scott 93 crew cab build Project 62

04-18-2010, 12:21 PM	#665
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: And so it begins................ Making some progress on the GMC! SWeet! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

04-18-2010, 01:07 PM	#666
TheSebring Account Suspended Join Date: May 2009 Location: Noble,Ok Posts: 576	Re: And so it begins................ I would assume he was behind his camera. Lol, afterall, he's the one who posted the pictures.

04-18-2010, 02:17 PM	#667
jojo printing is my trade Join Date: May 2009 Location: San Antonio, Texas Posts: 349	Re: And so it begins................ Lucky! I wish I had a "crew" Me and my truck need to move to OK for a few weeks. And ya'll can help me whip my ride into shape! __________________ Jojo's '70 stepside build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=344184



Register or Log In To remove these advertisements.

04-18-2010, 03:10 PM	#669
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: And so it begins................ good deal i am really concidering put trim on mine. i was not going to till i saw how nice slick67's looks with it. __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

04-18-2010, 08:40 PM	#670
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ Yeah I have to have the upper and lower trim and 2 tone paint on mine. They just don't look right without it.

04-18-2010, 08:45 PM	#671
beechd18 Account Suspended Join Date: Nov 2009 Location: Ninnekah,OK Posts: 376	Re: And so it begins................ Did the rain wash the primer off yet?

04-18-2010, 09:24 PM	#674
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: And so it begins................ wow, hope everything is okay with the truck. __________________ Looking for a 67-72 swb or blazer project in or around VA.

04-18-2010, 09:30 PM	#675
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: And so it begins................ Doh!! Ouchie __________________ Scott 93 crew cab build Project 62

Register or Log In To remove these advertisements.