Project 67 DRGNWGN - 67 Burban!! - Page 27 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**kev2809** · 03-06-2013, 09:14 PM

No work really done lately, im having to put a new roof on my house so there goes a huge chunk of my truck money.

Im gonna order new gaskets and bolts next week, do the valve stem seals and put the heads back on and try it fire it up again soon. I did get this in to start some body work...

Posted via Mobile Device

dr69burb · 03-06-2013, 11:34 PM

Cool man.
Posted via Mobile Device

Slick67 · 03-07-2013, 12:37 PM

Have you found a replacement engine yet?

**kev2809** · 03-07-2013, 01:46 PM

na i didn't look for one. when i seen the bee mound in the.cylinder i was actually relieved. i thought it would be a bent valve causing it not to turn...but it was just the dirt mound.

once i get the heads back on im gonna give it another shot and see what happens. either way im gonna start some body work soon
Posted via Mobile Device

**kev2809** · 03-24-2013, 12:51 PM

its alive!!!

jayman68 · 03-24-2013, 02:00 PM

Quote:

Originally Posted by kev2809

its alive!!!

Congrats! Good job.

**kev2809** · 03-24-2013, 02:59 PM

thanks..scared the hell out of me when it started. open headers in a garage....

somethings bugging me tho, i want to let it run enough to hear how it sounds, but it seems like when it turns on, it sounds like someone is smashing the gas pedal and its super reved up. i checked the linkage that the pedal connects to and i adjusted it..but it didnt change anything. any reason why it would be doing that?

i disconnected the fuel hose that runs from the pump to the tank, i ran it straight to a gas can because my tank isnt finished..

**kev2809** · 03-24-2013, 08:20 PM

nvm i got it...i had the linkage backwards on the carb. i also had to cut, bend, and drill a new hole in the rod, but i got it. turns on, runs and idles smooth after some adjustments. just leaks a little fuel from the front hose i think, i gotta work on that. gonna fix the driveshaft carrier bearing not aligning with the bolt holes, do the rear brakes and it should be ready to drive around the block !!!!!

Burb · 04-02-2013, 05:12 PM

Hey Kev ... don't forget take an extra gas can to make it around the 2nd half of the block ... lol

**kev2809** · 04-02-2013, 07:46 PM

lol...might need a drum of gas! i got the driveshaft bolted up and workin on the rear brakes now...drum brakes add up! shouldve just went discs ..
Posted via Mobile Device

**kev2809** · 04-07-2013, 05:28 PM

New rear shoes, spring kit, wheel cylinders, lug studs, and drums..

old crap..

new..

**kev2809** · 04-07-2013, 05:35 PM

ordered new acorn lug nuts from rockauto and ill get my wheels back on...

trying to figure out my gas tank problem. currently im starting the truck with my hose from fuel pump running to a gas tank on the floor, but i want to run it to my actual tank. i blew air threw the lines and it seems not to be blocked....but my problems is how im going to handle the fill tube. i raised my tank 2 inches so it doesnt get smashed when i air it out, but obviously the stock fill doesnt line up. should cut out the original mounting hole, and raise it up a few inches...or weld it up and run a "through the floor" mount in the truck? i would rather keep stock location, but im sure the 2" rise in the hose would keep gas sitting there....i like the 2" move up but it might look out of place....im not sure about the floor mount because i dont want gas smell all throughout the truck....

opinions welcome..

68burb · 04-07-2013, 06:43 PM

Raise up the stock one or add a newer gas door. I wouldn't put it inside either.
Posted via Mobile Device

**kev2809** · 04-07-2013, 08:32 PM

Ya. The inside the bed idea is my last resort...i really dont want gas smell everywhere.
Posted via Mobile Device

Bud1300 · 04-08-2013, 03:17 PM

I just order my new fuel tank today so I will be running into the same issues, thanks for the help..

**kev2809** · 04-08-2013, 03:35 PM

np..i think i will just move up the stock fill tube, im not a big fan of the pop open doors.

if i mounted it as is, with the stock hole 3" lower than the tank, would that allow gas to sit there in the tube or not even make it to the tank (causing gas to spill out)?
Posted via Mobile Device

maxxxy · 04-08-2013, 03:45 PM

What if you used one of these Mounted higher on the panel? I think its called a "Matt Hotch pop-up cap"

**kev2809** · 04-08-2013, 04:16 PM

pretty cool gas cap, i wouldnt mind using one if i had a truck, they would fit real well on the top of a bed rail

**kev2809** · 04-14-2013, 09:56 PM

Got the fuel line finished outback..i bent the stock line up the notch, bought a new flared line and bent that around the rest of the notch, connected the 2 together with a small piece of fuel hose and clamps, then ran about a foot of fuel hose from the tank to the hardline on the frame like the factory did. Not the most prfoessional setup, but it should work and will be covered by the floor anyways. Also installed new rear brake lines from lmc. Working on the fuel filler..and thinking of this....

Im going to have to use a spacer on the filler to mount it right...its at a small angle. Does anyone see a problem running in like this?
Posted via Mobile Device

Slick67 · 04-18-2013, 02:10 PM

Always good to see some progress!! Hope it keeps moving forward for you!

1sik7t2 · 04-18-2013, 02:56 PM

hate drum brakes with a passion....f em

Quote:

Originally Posted by kev2809

new rear shoes, spring kit, wheel cylinders, lug studs, and drums..

Old crap..

new..

**kev2809** · 04-18-2013, 03:51 PM

Quote:

Originally Posted by Slick67

Always good to see some progress!! Hope it keeps moving forward for you!

Thanks. Seeing the motor fire up and run kept me motivated!

Quote:

Originally Posted by 1sik7t2

hate drum brakes with a passion....f em

Ya. With the cost of new stuff (close to $200)...i shouldve switched to disc brakes. Live and u learn i guess...

Close to taking this thing around the block! Need to grease all fittings on the suspension and u joints, put the cotter pins in the suspension, flush radiator, and mount the fuel neck....

Does the pic above look like an extreme angle for the fuel hose? Those last 2 inches will be hose to connect the 2 together..
Posted via Mobile Device

**kev2809** · 05-18-2013, 11:09 PM

finally "finished" up the fuel filler hole. i cut it out and raised it up a few inches and forward about 1 inch. fill tube is still a little at a slant, but im thinking of cutting the dip off the stock filler and running a straight tube.

Posted via Mobile Device

**kev2809** · 05-18-2013, 11:29 PM

Angle of the fill tube. I already put gas in and it filled fine..nothing spitting back up. Truck turned on and ran also, so i know. The fuel pump is working.

[IMG]

[/IMG]
Posted via Mobile Device

**kev2809** · 05-18-2013, 11:34 PM

I noticed something when im running the motor....i can see some light smoke coming from the passenger side of the motor. I thought it was something from the wires, but i didnt see anything. Not coming directly out of the manifold either. Just the passenger area of the motor...not sure what it could be. The top of the motor (valve covers, water neck, etc.) was getting really hot, not sure if thats normal with the old motors. Was real hot to the touch. As soon as i get my brake problem sorted out ima gonna take it for a spin and see if i notice anything.
Posted via Mobile Device

03-06-2013, 09:14 PM	#651
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! No work really done lately, im having to put a new roof on my house so there goes a huge chunk of my truck money. Im gonna order new gaskets and bolts next week, do the valve stem seals and put the heads back on and try it fire it up again soon. I did get this in to start some body work... Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

03-06-2013, 11:34 PM	#652
dr69burb Registered User Join Date: Mar 2012 Location: San Diego CA Posts: 223	Re: Project 67 DRGNWGN - 67 Burban!! Cool man. Posted via Mobile Device __________________ Baggin 64 lwb project http://67-72chevytrucks.com/vboard/s...d.php?t=537406

03-07-2013, 12:37 PM	#653
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Project 67 DRGNWGN - 67 Burban!! Have you found a replacement engine yet? __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

03-07-2013, 01:46 PM	#654
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! na i didn't look for one. when i seen the bee mound in the.cylinder i was actually relieved. i thought it would be a bent valve causing it not to turn...but it was just the dirt mound. once i get the heads back on im gonna give it another shot and see what happens. either way im gonna start some body work soon Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

03-24-2013, 12:51 PM	#655
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! its alive!!! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 03-24-2013 at 12:57 PM.

03-24-2013, 02:59 PM	#657
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! thanks..scared the hell out of me when it started. open headers in a garage.... somethings bugging me tho, i want to let it run enough to hear how it sounds, but it seems like when it turns on, it sounds like someone is smashing the gas pedal and its super reved up. i checked the linkage that the pedal connects to and i adjusted it..but it didnt change anything. any reason why it would be doing that? i disconnected the fuel hose that runs from the pump to the tank, i ran it straight to a gas can because my tank isnt finished.. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

03-24-2013, 08:20 PM	#658
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! nvm i got it...i had the linkage backwards on the carb. i also had to cut, bend, and drill a new hole in the rod, but i got it. turns on, runs and idles smooth after some adjustments. just leaks a little fuel from the front hose i think, i gotta work on that. gonna fix the driveshaft carrier bearing not aligning with the bolt holes, do the rear brakes and it should be ready to drive around the block !!!!! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

04-02-2013, 05:12 PM	#659
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: Project 67 DRGNWGN - 67 Burban!! Hey Kev ... don't forget take an extra gas can to make it around the 2nd half of the block ... lol __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

04-02-2013, 07:46 PM	#660
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! lol...might need a drum of gas! i got the driveshaft bolted up and workin on the rear brakes now...drum brakes add up! shouldve just went discs .. Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

04-07-2013, 05:28 PM	#661
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! New rear shoes, spring kit, wheel cylinders, lug studs, and drums.. old crap.. new.. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

04-07-2013, 05:35 PM	#662
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! ordered new acorn lug nuts from rockauto and ill get my wheels back on... trying to figure out my gas tank problem. currently im starting the truck with my hose from fuel pump running to a gas tank on the floor, but i want to run it to my actual tank. i blew air threw the lines and it seems not to be blocked....but my problems is how im going to handle the fill tube. i raised my tank 2 inches so it doesnt get smashed when i air it out, but obviously the stock fill doesnt line up. should cut out the original mounting hole, and raise it up a few inches...or weld it up and run a "through the floor" mount in the truck? i would rather keep stock location, but im sure the 2" rise in the hose would keep gas sitting there....i like the 2" move up but it might look out of place....im not sure about the floor mount because i dont want gas smell all throughout the truck.... opinions welcome.. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

04-07-2013, 06:43 PM	#663
68burb Registered User Join Date: Jan 2007 Location: Keizer, Oregon Posts: 78	Re: Project 67 DRGNWGN - 67 Burban!! Raise up the stock one or add a newer gas door. I wouldn't put it inside either. Posted via Mobile Device __________________ 1968 K10 burb- on it's way to being C10 sporting a 454 th400 and LTZ 20's 1995 K2500 Burb as daily driver 350 with 193K miles 1994 K1500 Silverado ECSB building a TBI 350 for it 330 horse

04-07-2013, 08:32 PM	#664
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! Ya. The inside the bed idea is my last resort...i really dont want gas smell everywhere. Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

04-08-2013, 03:17 PM	#665
Bud1300 Registered User Join Date: May 2006 Location: Elmore Posts: 108	Re: Project 67 DRGNWGN - 67 Burban!! I just order my new fuel tank today so I will be running into the same issues, thanks for the help..

04-08-2013, 03:35 PM	#666
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! np..i think i will just move up the stock fill tube, im not a big fan of the pop open doors. if i mounted it as is, with the stock hole 3" lower than the tank, would that allow gas to sit there in the tube or not even make it to the tank (causing gas to spill out)? Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]



Register or Log In To remove these advertisements.

04-08-2013, 03:45 PM	#667
maxxxy Registered User Join Date: Jul 2010 Location: Norman, Oklahoma Posts: 557	Re: Project 67 DRGNWGN - 67 Burban!! What if you used one of these Mounted higher on the panel? I think its called a "Matt Hotch pop-up cap" __________________ Max Max's bagged 81 81 rcsb bagged, 22s, build in progress 09 ext cab, 24" U2's, DD sub/amp

04-08-2013, 04:16 PM	#668
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! pretty cool gas cap, i wouldnt mind using one if i had a truck, they would fit real well on the top of a bed rail __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

04-14-2013, 09:56 PM	#669
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! Got the fuel line finished outback..i bent the stock line up the notch, bought a new flared line and bent that around the rest of the notch, connected the 2 together with a small piece of fuel hose and clamps, then ran about a foot of fuel hose from the tank to the hardline on the frame like the factory did. Not the most prfoessional setup, but it should work and will be covered by the floor anyways. Also installed new rear brake lines from lmc. Working on the fuel filler..and thinking of this.... Im going to have to use a spacer on the filler to mount it right...its at a small angle. Does anyone see a problem running in like this? Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

04-18-2013, 02:10 PM	#670
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Project 67 DRGNWGN - 67 Burban!! Always good to see some progress!! Hope it keeps moving forward for you! __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

05-18-2013, 11:09 PM	#673
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! finally "finished" up the fuel filler hole. i cut it out and raised it up a few inches and forward about 1 inch. fill tube is still a little at a slant, but im thinking of cutting the dip off the stock filler and running a straight tube. Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-18-2013, 11:29 PM	#674
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! Angle of the fill tube. I already put gas in and it filled fine..nothing spitting back up. Truck turned on and ran also, so i know. The fuel pump is working. [IMG][/IMG] Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-18-2013, 11:34 PM	#675
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: Project 67 DRGNWGN - 67 Burban!! I noticed something when im running the motor....i can see some light smoke coming from the passenger side of the motor. I thought it was something from the wires, but i didnt see anything. Not coming directly out of the manifold either. Just the passenger area of the motor...not sure what it could be. The top of the motor (valve covers, water neck, etc.) was getting really hot, not sure if thats normal with the old motors. Was real hot to the touch. As soon as i get my brake problem sorted out ima gonna take it for a spin and see if i notice anything. Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

Register or Log In To remove these advertisements.