LS swappers, post up your pics!!

[mac72]

If only I had a little more money

[gixxer711]

Originally Posted by mac72

Nice work guys they really look sweet
Heres a few of mine

Anyone know what accessory setup this is?

[mooseknuckles]

looks like vintage air...

[chevyc10lover]

Originally Posted by mac72

Nice work guys they really look sweet
Heres a few of mine

nice swap. i know is an old tread, but i should ask.. what kind or rack and pinion is that?

[Duck1]

Originally Posted by chevyc10lover

nice swap. i know is an old tread, but i should ask.. what kind or rack and pinion is that?

Is that mount up side down?

[79gmc5.3]

Here is mine, 79 GMC Seirra with a 2003 6.0L LQ4 / 4L60E from a Yukon Denali. Love the reliability and performance.

[clinebarger]

85 C20 Suburban with a 2004 5.3/4L60E completed in june of 04. Ive put about 30,000 miles on it since.

[68 c10 ls2]

hese is my 02 6.0L with heads, cam, and a maggie 112 supercharger over drinin to runn 15psi of boost.

[tk-mpl]

Here is my baby... Its a 2007 5.3L/4L60 DOD engine out of a Tahoe.. I used performance online's engine mounts and trans cross member kit.. It has 2001 F-body pacesetter long tubes and is tuned with EFI Live ( only have vats disabled for now)..
First times its seen day light in 6yrs..

[LSX72C10]

I will get more pics tomorrow! I am building 72 c10 with 2004 5.3 4l80e Trans and 76mm Turbo. I finished building headers tonight. Will keep you updated with the build.

[glock35ipsc]

low_84_inchaska - I built a simple box mount for mine that sets up against the rad support, and uses two of the three rad support-to-inner fender mounting holes.

It's since been painted.

[eagleuh1]

68GMC, you talkin to me. If so, heres some more pics.

[bbadfred]

lq9/4l65 44k salvage yard motor from a 2004 chevy truck , Speartech wiring harness drive by wire and reprogrammed PCM, 9inch moserw/race axles trac lok 3.50 gear, 9" Moser w/caltrac bars.

[scoot_mcgrute]

Here's mine, 2.5 months for the swap and about 1500 miles on it so far with very few problems. I used a 2002 Silverado 5.3 and topped it off with an LS1 intake and injector setup, I love it!

[SeventyTwo]

Originally Posted by scoot_mcgrute

Here's mine, 2.5 months for the swap and about 1500 miles on it so far with very few problems. I used a 2002 Silverado 5.3 and topped it off with an LS1 intake and injector setup, I love it!

Killer truck, man. Looks so rad.

[60apache]

Originally Posted by scoot_mcgrute

Here's mine, 2.5 months for the swap and about 1500 miles on it so far with very few problems. I used a 2002 Silverado 5.3 and topped it off with an LS1 intake and injector setup, I love it!

how do you like the brakes with no booster? thinking of doing a wildwood master like that.

[LEEVON]

In progress. The block will be blue like the wheels and it will have cast aluminum finned valve covers. That is an NP833 o/d 4-speed behind it. Just finished putting in a 212/218 .522/.529 cam, LS6 springs, and TSP pushrods. Gonna need some less expensive tires for burnouts...

[85burb]

Got motor mostly back together and only have few more things to order.....we have all said that befor....

[85burb]

Got a few more things installed...

[matthew20061]

My 1969 Chevy C-10 Stepside Swap, started off as a simple 5.3L swap with a nice electroic 4L60E. Then I decided that wasn't good enough so I cammed it, that was a great improvement but then I decided to go crazy and swap it out with a completely build up LQ9 6.0L with brand new high flowing L92 cylinder heads, LS3 Intake manifold, 90mm throttle body, Comp Cams 223/231, .610/.617, on 112 lsa. I topped the new motor off with GM Performance Part LSX polished valve covers and hiding the coils in the frame rails!!!
PICS:











VIDEO:

http://www.youtube.com/watch?v=8VYgq_zHlMA

Many more pics in my build thread and I'm planning on taking it out to the track this spring to see how fast it is!

[matthew20061]

Originally Posted by mac72

Really nice job! Ive been wanting to see a pic of those valve covers,thanks for sharing. Do you have any hp&torq numbers with that cam & head combo?

I just got it running for the first time this week so no numbers from my exact setup but I copyed this setup: "LS2 with L92 Heads LS3 Manifold makes 460rwhp and 446rwtq" So it should run awesome!!!

[c.brown]

i finally explored this sight farther than the 60-66 section heres mine so far 1966 suburban 6.2 and a 6l90e porterbuilt front and rear

[rob32472]

The pic is a bout a month old I have added the three piece engine cover and is really looks good will post some pics when I can......

[RocketKing]

Before








After

[RocketKing]

Originally Posted by Puglia10

looks great! what steps and products were used?

I cleaned nearly every thing with Purple Power, water, soft bristle scrub brush, rag and elbow grease. It was amazing how well it cleaned, just don't leave it on too long before washing off with water.
I used Duplicolor Chrysler Silver Met. on the water pump, a/c, pulleys, tranny and accessories.
I used the high heat Duplicolor primer on the engine and then ordered Corvette Torch Red in a aerosol can, then finished up with high heat clear gloss for the shiny.
I used Rustoleam Industrial Semi-Gloss black on the metal parts and gloss black paint made specifically for plastics...I will get the name and edit later.
I used a flat black high heat for the exhaust manifolds, can't remember the name...maybe VHT or something like that.
All of the paint was bought off the shelf from O'Reilly with the exception of the Torch Red which they ordered for me and had the next day.

Gotta be careful witht the GM colors special order spray cans, the paint flows reeeal thin. Better to take your time with multiple coats to avoid runs. IMHO