67 cheby's Dropmember build thread (CLOUD 9) - Page 272 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67cheby** · 10-02-2012, 09:52 AM

Here some of the recent progress, plugged off the old lines from the fuel tank and added a vent , almost completely finished with fuel and return lines, all sensors are on the motor (their are several with the Dakota Digital ones and the EFI ones for the Painless harness) I have been fighting with getting the powersteering pump lined up right last night we got that done, Made and Ran the plug wires last night (still have to secure them and group them nicely) , put some trim on the doors, QUESTION on the mustang style rack and pinion does it matter which one is pressure and return ? the pressure and return lines fit on either one ?

**67cheby** · 10-02-2012, 09:53 AM

Quote:

Originally Posted by screaminchevypickup

Ok did I miss something?? I didn't think the truck was going to be a goodguys this weekend?? Just you Sunday?
Posted via Mobile Device

No , the truck will not be going just me !

Rusbuilt · 10-02-2012, 11:34 AM

Looking good sir!

VA72C10 · 10-02-2012, 11:41 AM

Looking. Great!
Posted via Mobile Device

**lolife99** · 10-02-2012, 11:54 AM

Pressure and return lines definitely go to a certain port on the rack.
They aren't interchangeable.
The threaded fitting in my rack were even a different size.
Are you using AN fittings?

This is what I used,...
http://www.unisteer.com/search_by_pr..._fittings.html

Edit:
I see the fittings in your rack now.

**67cheby** · 10-02-2012, 12:02 PM

i text Nathan this morning he said it is the smaller side that is the pressure, he thinks the top ? I guess i will have to take my fittings back out (they are both the same) and see if one hole is smaller ?

**lolife99** · 10-02-2012, 12:07 PM

Unisteer link I listed says this:

Fitting kit for Mustang II Power Rack and Pinions. Fitting kit converts 5/8 and 9/16 ports on 74-78 and 79-93 Mustang Power Rack & Pinions. Kit comes with the following.

9/16" X 6AN Pressure fitting for lower port

5/8" X 6AN Return fitting for upper port

**67cheby** · 10-02-2012, 12:09 PM

in the second picture from the bottom you can see the fittings in my rack and they both have the same size openings ?

**67cheby** · 10-02-2012, 12:11 PM

Keith , thanks for the information !

Slick67 · 10-02-2012, 12:54 PM

Quote:

Originally Posted by 67cheby

No , the truck will not be going just me !

Dang it. I'm missin out.

watahyahknow · 10-02-2012, 03:34 PM

back on the rearlights you might get the baddest of the glare in the center away by painting the tops of the bulbs themselves , irs a cheap enough mod to try if it doesnt work trow away the bulbs and start again

fastcam1 · 10-02-2012, 04:21 PM

Man the attention to detail on this build is insane if my truck was ever a tenth as nice as yours I would be happy lol
Posted via Mobile Device

**67cheby** · 10-02-2012, 04:33 PM

Quote:

Originally Posted by Xeen

I bet thats a little strange, most manufactures dont give a darn about customer feedback about their products and these guys are telling you they will customize the lighting solution just for you, strange indeed.

yes, it is impressive !

Quote:

Originally Posted by nuke1

Mike, I can not believe how far your truck and you have come, since the humble beginnings to this absolutely amazing work of rolling art you have created. Slightly different colors and interior, amazing products throughout the truck plus much much more. I wish I was able to go to SEMA this year and see your truck there if it makes it. That would mean alot just to see this in person. You my sire are a n inspiration to all of us. Congrats.

WOW, man that is a big compliment ! Thank you

Quote:

Originally Posted by Slick67

Hey James (nuke1) I'll send you some pics of it, he will be at Good Guys next weekend. Yay....I get to see CLOUD 9 in person!!

Sorry man the truck wont be making it to GG

Quote:

Originally Posted by nuke1

I would appreciate that immensely, Pics of your guys' trucks together would be awesome. up here in the great white north we never get a chance to see some of the beautiful trucks and cars that all of you have down there. We are kinda unfortunate that way. It is also hard to get sponsored up here because of that, the work I do is top notch, but I will never see endorsements. So a big congratulations to all of you that have the means down there.

Thanks man !

Quote:

Originally Posted by VA72C10

Those look good, but would be much better if they lit up the entire lens....would be much more custom and fit the "look" of the lenses better
Posted via Mobile Device

i am going to talk to them about it tomorrow !

Quote:

Originally Posted by Zoomin

I think the lights look great. *shrug*
Posted via Mobile Device

i wont complain !! LOL

Quote:

Originally Posted by Chvy2NV

I kinda have mixed feelings on the lights. Wish they would light up like some late model Cadillacs.
Posted via Mobile Device

that would be cool !

Quote:

Originally Posted by screaminchevypickup

I think I would run feslers LEDs they look much better and fill the whole lens..
Posted via Mobile Device

Dakota Digital has been great to me, i had better stick with their lights ! and Fesler but i had the DD lights before i got the sponsorship from Fesler

Quote:

Originally Posted by Slick67

Mike, all these guys are right, get rid of the lights and send em to me!!!

Really looking forward to seeing you and you're outstanding truck this weekend.

LOL, well i will see you at least, sorry to dissapoint !

Quote:

Originally Posted by rhd_c10

been awhile since i have check your thread.. wow its moving along quickly..
thanks man, we are trying !
how about a set of led to put back to fill in that lense..

Quote:

Originally Posted by hgs_notes

I don't really care for the look of the lights that have a dozen LEDs in them. I prefer the single bulb look myself. The only way to get the light spread lower though would be to build light housings that are open top to bottom. We can see the shape of the OEM light housing in there with it lit up. If you could open the housing up to match the shape of the lense and then used 2 or 3 lower intensity lights it would spread the light out more evenly and be something only nuts like us would notice. Could be a new product line for somebody.
I agree that would work well !
Please send royalties to hgs_notes@yahoo.com via paypal. Thank you.

LOL...SLOSH LIGHTS??

Quote:

Originally Posted by Lolyin58

Mike great work, truck is progressing really good! Keep it up as your almost there man!!

thanks man !

Quote:

Originally Posted by Dinos63

x2 brotha!!

Thanks man !

Quote:

Originally Posted by Rusbuilt

Looking good sir!

and thank you !

Quote:

Originally Posted by VA72C10

Looking. Great!
Posted via Mobile Device

thanks

Quote:

Originally Posted by Slick67

Dang it. I'm missin out.

you get to see me !!! LOL

Quote:

Originally Posted by watahyahknow

back on the rearlights you might get the baddest of the glare in the center away by painting the tops of the bulbs themselves , irs a cheap enough mod to try if it doesnt work trow away the bulbs and start again

these have one tiny led bulb in them making all that light !

Quote:

Originally Posted by fastcam1

Man the attention to detail on this build is insane if my truck was ever a tenth as nice as yours I would be happy lol
Posted via Mobile Device

Thanks man..it has been a LOOOONG road , ready to be done...my wife thinks i might have post pardrom syndrom when i am done though !! (i probably didnt spell that right )

VA72C10 · 10-02-2012, 05:00 PM

Quote:

Originally Posted by 67cheby

..my wife thinks i might have post pardrom syndrom when i am done though !! (i probably didnt spell that right )

good thing you have her build to start next

laid67 · 10-03-2012, 01:10 AM

i vote for going back to DD and seeing if they have an alternative to one bright light. does the light you have now still use the stock housing?

CC69Rat · 10-03-2012, 08:10 AM

Mike, it seems everything you do just takes it up one more notch. This truck is absolutely incredible brother. Great Job. You deserve every compliment as the attention to detail is top notch.

**67cheby** · 10-03-2012, 09:48 AM

Quote:

Originally Posted by VA72C10

good thing you have her build to start next

LOL....i might have to take some time off, i am WORE OUT !!!

Quote:

Originally Posted by laid67

i vote for going back to DD and seeing if they have an alternative to one bright light. does the light you have now still use the stock housing?

I am talking to them and yes i still have the stock housing

Quote:

Originally Posted by CC69Rat

Mike, it seems everything you do just takes it up one more notch. This truck is absolutely incredible brother. Great Job. You deserve every compliment as the attention to detail is top notch.

Thank you man , i appreciate that !

**67cheby** · 10-03-2012, 09:57 AM

Very productive night last night, Finished my Air Ride finally all ride height sensors done and all, it was fun to watch it program and set itself !! pretty cool system !! Also got some killer sneak peek pictures of my surfboard from TXPINSTRIPER (John Carpenter) doing an absolutely AMAZING JOB !!! I cant say THANK YOU enough !! Look at this work it will blow you away !

thor · 10-03-2012, 10:36 AM

did ya video the air ride programming itself? would be cool to see. and that surfboard is sick!

VA72C10 · 10-03-2012, 10:43 AM

Quote:

Originally Posted by thor

did ya video the air ride programming itself? would be cool to see. and that surfboard is sick!

Posted via Mobile Device

**67cheby** · 10-03-2012, 10:45 AM

i didnt man , wish i would have, everytime i video something me and the wife about get divorced trying to figure out how post it !! LOL, it is really a pain for me to post a video !

watahyahknow · 10-03-2012, 10:58 AM

you can safe the video on the computer open a free accound on youtube upload the video there and then post the link on here , i have this cheap HD cam that is made for stuff like that , works verry whell for short ish clips

**67cheby** · 10-03-2012, 11:03 AM

That is what we do , however it seems like everytime we do it we forget how we did it before and it drives me crazy !! LOL

69CST-V · 10-03-2012, 11:09 AM

Looks great Mike. Nice progress on everything.

jlsanborn · 10-03-2012, 12:17 PM

Super cool! We need more pictures dude!

10-02-2012, 09:52 AM	#6776
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) Here some of the recent progress, plugged off the old lines from the fuel tank and added a vent , almost completely finished with fuel and return lines, all sensors are on the motor (their are several with the Dakota Digital ones and the EFI ones for the Painless harness) I have been fighting with getting the powersteering pump lined up right last night we got that done, Made and Ran the plug wires last night (still have to secure them and group them nicely) , put some trim on the doors, QUESTION on the mustang style rack and pinion does it matter which one is pressure and return ? the pressure and return lines fit on either one ? Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-02-2012, 11:34 AM	#6778
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: 67 cheby's Dropmember build thread (CLOUD 9) Looking good sir! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

10-02-2012, 11:41 AM	#6779
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 67 cheby's Dropmember build thread (CLOUD 9) Looking. Great! Posted via Mobile Device __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-02-2012, 11:54 AM	#6780
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: 67 cheby's Dropmember build thread (CLOUD 9) Pressure and return lines definitely go to a certain port on the rack. They aren't interchangeable. The threaded fitting in my rack were even a different size. Are you using AN fittings? This is what I used,... http://www.unisteer.com/search_by_pr..._fittings.html Edit: I see the fittings in your rack now. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 10-02-2012 at 12:03 PM.

10-02-2012, 12:02 PM	#6781
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) i text Nathan this morning he said it is the smaller side that is the pressure, he thinks the top ? I guess i will have to take my fittings back out (they are both the same) and see if one hole is smaller ? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-02-2012, 12:07 PM	#6782
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: 67 cheby's Dropmember build thread (CLOUD 9) Unisteer link I listed says this: Fitting kit for Mustang II Power Rack and Pinions. Fitting kit converts 5/8 and 9/16 ports on 74-78 and 79-93 Mustang Power Rack & Pinions. Kit comes with the following. 9/16" X 6AN Pressure fitting for lower port 5/8" X 6AN Return fitting for upper port __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

10-02-2012, 12:09 PM	#6783
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) in the second picture from the bottom you can see the fittings in my rack and they both have the same size openings ? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-02-2012, 12:11 PM	#6784
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) Keith , thanks for the information ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-02-2012, 03:34 PM	#6786
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: 67 cheby's Dropmember build thread (CLOUD 9) back on the rearlights you might get the baddest of the glare in the center away by painting the tops of the bulbs themselves , irs a cheap enough mod to try if it doesnt work trow away the bulbs and start again __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

10-02-2012, 04:21 PM	#6787
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: 67 cheby's Dropmember build thread (CLOUD 9) Man the attention to detail on this build is insane if my truck was ever a tenth as nice as yours I would be happy lol Posted via Mobile Device __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks

10-03-2012, 01:10 AM	#6790
laid67 Registered User Join Date: Oct 2011 Location: Rosamond, CA Posts: 94	Re: 67 cheby's Dropmember build thread (CLOUD 9) i vote for going back to DD and seeing if they have an alternative to one bright light. does the light you have now still use the stock housing?

10-03-2012, 08:10 AM	#6791
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,212	Re: 67 cheby's Dropmember build thread (CLOUD 9) Mike, it seems everything you do just takes it up one more notch. This truck is absolutely incredible brother. Great Job. You deserve every compliment as the attention to detail is top notch. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

10-03-2012, 09:57 AM	#6793
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) Very productive night last night, Finished my Air Ride finally all ride height sensors done and all, it was fun to watch it program and set itself !! pretty cool system !! Also got some killer sneak peek pictures of my surfboard from TXPINSTRIPER (John Carpenter) doing an absolutely AMAZING JOB !!! I cant say THANK YOU enough !! Look at this work it will blow you away ! Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-03-2012, 10:36 AM	#6794
thor Registered User Join Date: Apr 2008 Location: Redmond, WA Posts: 679	Re: 67 cheby's Dropmember build thread (CLOUD 9) did ya video the air ride programming itself? would be cool to see. and that surfboard is sick! __________________ 1972 Chevy Blazer CST.....Project: Polished Turd

10-03-2012, 10:45 AM	#6796
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) i didnt man , wish i would have, everytime i video something me and the wife about get divorced trying to figure out how post it !! LOL, it is really a pain for me to post a video ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172



Register or Log In To remove these advertisements.

10-03-2012, 10:58 AM	#6797
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: 67 cheby's Dropmember build thread (CLOUD 9) you can safe the video on the computer open a free accound on youtube upload the video there and then post the link on here , i have this cheap HD cam that is made for stuff like that , works verry whell for short ish clips __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

10-03-2012, 11:03 AM	#6798
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 67 cheby's Dropmember build thread (CLOUD 9) That is what we do , however it seems like everytime we do it we forget how we did it before and it drives me crazy !! LOL __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-03-2012, 11:09 AM	#6799
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: 67 cheby's Dropmember build thread (CLOUD 9) Looks great Mike. Nice progress on everything. __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks

10-03-2012, 12:17 PM	#6800
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,367	Re: 67 cheby's Dropmember build thread (CLOUD 9) Super cool! We need more pictures dude! __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

Register or Log In To remove these advertisements.