Project: Shiro

[richeilers]

Just started and read this thread today........I think I'm caught up with all the changes. As for trim/color......gotta agree with the white/chrome look too. I know you're trying hard to get black in there (explains your love of the previous wheels?). But, as always, as the theme has been - what does your boy think? Not that he should be the final answer but it's you two that will see and drive it so you gotta do what you two like, not what everyone else wants. Keep on truckin with it........deadline's a loomin'. Subscribed.

[C10_ustacould]

Originally Posted by mooseknuckles

I think the black trim look could work, but you'd have to do the bumpers too....and maybe some black forgeline pro-touring type wheels...a black top might be too much?.....but then again that all white 67 is sooo sweet!

Originally Posted by Possmguts

Its your truck and you should do what You want... BUT I think a white truck NEEDS chrome trim and wheels. Just sayin....

Originally Posted by smbrouss70

My $.02... Chrome!

Originally Posted by Bennett68C10

Ok since it's one or the other, my vote is for Chrome bumpers and trim, it just looks better to me especially with the wheels you chose. I wouldn't worry about looking like any other trucks on here, look at me I'm painting mine red and how many trucks are Red. Besides I've only seen one white c10 like that and it's the one Keith posted.

Thanks for the feedback fellas, it's much appreciated.

Originally Posted by richeilers

Just started and read this thread today........I think I'm caught up with all the changes. As for trim/color......gotta agree with the white/chrome look too. I know you're trying hard to get black in there (explains your love of the previous wheels?). But, as always, as the theme has been - what does your boy think? Not that he should be the final answer but it's you two that will see and drive it so you gotta do what you two like, not what everyone else wants. Keep on truckin with it........deadline's a loomin'. Subscribed.

You think you're caught up with all the changes?? You should spend ten minutes in my head!!

[mcbassin]

Your truck will look good however you decide to the paint and bumpers. In the end you have to make it the way you want.
With that said, I think Chevy got these trucks "right" the first time. It's hard to beat any of them with chrome and full trim. As far as color goes, just about any color looks good on the 67-72.
Oh and don't worry about being unique. All of our trucks are different in their own ways. Height, wheels, engine, etc. rock on

[nlped]

Okay, since uniqueness is the key...GOLD PLATE 'em

[C10_ustacould]

Originally Posted by mcbassin

Your truck will look good however you decide to the paint and bumpers. In the end you have to make it the way you want.
With that said, I think Chevy got these trucks "right" the first time. It's hard to beat any of them with chrome and full trim. As far as color goes, just about any color looks good on the 67-72.
Oh and don't worry about being unique. All of our trucks are different in their own ways. Height, wheels, engine, etc. rock on

Well stated.

Originally Posted by nlped

Okay, since uniqueness is the key...GOLD PLATE 'em

[nuke1]

Truck looks amazing, I really dig the coilovers. that is what I would like on havoc.

[knomadd]

I know you've heard a lot of opinions, and I hope you haven't heard enough, or this will just annoy you. Hopefully not though... Here goes:

I, personally, like the chrome instead of the black. But that's me. If you like the black go with the black. BUT, something to consider... If you scuff and paint the trim, and at some point want to go back to chrome/stainless look, you'll have to replace or replate it all = $$$. If you just want to see what it looks like, maybe keep it that way for a year or two, you might try painting the pieces with Plasti Dip. I'm not really familiar with the product so you'll need to do a bit of research, but from what I've seen/heard, it can be pealed off without damaging the surface under it. Might at least be worth looking into.

By the way, I like watching you run all (most? maybe just some?) of your ideas through this thread. It's fun trying to picture the end result... Nothing beats the real thing though. Keep up the good work!

[slowcpe]

If chrome bumper and trim are on the table that would be my pick hands down. There's just something clean, simple and timeless as a clean white vehicle with some shiny trim.

[SeTx67]

I say go with chrome. My truck is all white and it needs something to set it off a little more

[C10_ustacould]

Originally Posted by nuke1

Truck looks amazing, I really dig the coilovers. that is what I would like on havoc.

Thanks Nuke1, the guys at PBFAB.com have everything you need so give them a shout.

Originally Posted by knomadd

By the way, I like watching you run all (most? maybe just some?) of your ideas through this thread. It's fun trying to picture the end result... Nothing beats the real thing though. Keep up the good work!

I'm not sure I'm the most undecided builder on the board but I'm probably in the top 10... Just wait until we get to the interior.

Hint...

[GAc10boy]

I'm not sure I'm the most undecided builder on the board but I'm probably in the top 10... Just wait until we get to the interior.

Hint...
Attachment 1358649

I'd say I'm right up there with you, Buck. But, boy, do i love that interior pattern!

[C10_ustacould]

Worked on the heater delete panels tonight. A little more tacking and then a bunch of grinding.

[mcbassin]

Nice work on the firewall. In hindsight, I wish I could have used the PBFab fillers. They look like they would make the bodywork so much easier. Keep up the good work.

[C10_ustacould]

Originally Posted by mcbassin

Nice work on the firewall. In hindsight, I wish I could have used the PBFab fillers. They look like they would make the bodywork so much easier. Keep up the good work.

Thanks Mike, They do make it easy but I don't do body work (filler/paint) so I couldn't comment on that part. The area around the blower motor is a little distorted, but I think it was like that before I started. I just took my time and spread the heat out trying to avoid warping and it seems to have turned out well. Once I get these done and the corner piece installed I plan to smooth over the "wire well" in the top of the firewall, that should be interesting. I really like how the firewall in Keith Stephens' "Tiffany" looks so I'm going to give it a shot. After all it looks easy in his build thread; photo 1 = rusty firewall, photo 2 = perfectly smoothed firewall, should be a snap! I wish I had a portion of the talent some of you all have just in your pinky finger, you make it look easy.

[C10_ustacould]

Finished welding on the firewall panels today.

All welded up


Ground as smooth as I can get it. Will need some attention from a body man.


I think it will look good once the painter is done with his magic.

[sduckworth13]

Nice work Buck!

[nlped]

Nice work Ernie! That makes such an improvement.

[cericd]

Highlander plaid interior?!?

Sweet!!!

[Number98]

The firewall looks really good!

[C10_ustacould]

Originally Posted by sduckworth13

Nice work Buck!

Originally Posted by cericd

Highlander plaid interior?!?

Sweet!!!

Originally Posted by Number98

The firewall looks really good!

Thanks guys! I am learning a lot, discovering mistakes I've made in the past. The main one being, In my mind I see the finished product being a perfectly metal finished firewall waiting for a some high build primer, a quick sand and shiny white paint. The truth is, it's going to be a jagged, bumpy, wavy firewall that some poor body man is going to have to straighten out for me. The take away for me is to stop grinding when it gets close and let the experienced guy take it from there. I want to "cap" the wire well next so I will be looking for a place to buy some good 18 gauge steel and researching how others have done it in the past... should be interesting! Thanks for following along!

[jmedero]

http://67-72chevytrucks.com/vboard/s...=378084&page=8

I actually cut the lip off and stich welded it.

[lolife99]

I never have understood what you do "inside" the "boxed" gutter rail to prevent rust.
Weldable primer?
Is that never going to rust?
Just trying to understand.

I see tons of threads where they grind to bare metal and then cap off and box an area,... then complete the bodywork and paint process.
What keeps it from rusting and bubbling thru later?
Same for any area of the truck that is welded shut.
How do you rust proof the backside?

[jmedero]

Main reason I just cut my lip rail off.

[C10_ustacould]

Originally Posted by jmedero

http://67-72chevytrucks.com/vboard/s...=378084&page=8

I actually cut the lip off and stich welded it.

Originally Posted by lolife99

I never have understood what you do "inside" the "boxed" gutter rail to prevent rust.
Weldable primer?
Is that never going to rust?
Just trying to understand.

I see tons of threads where they grind to bare metal and then cap off and box an area,... then complete the bodywork and paint process.
What keeps it from rusting and bubbling thru later?
Same for any area of the truck that is welded shut.
How do you rust proof the backside?

Originally Posted by jmedero

Main reason I just cut my lip rail off.

I have been pondering that for the last few days. The first thought was weld through primer, but I don't know how it would help with the rust I can't sand/grind off. I have also considered ospho which would convert the existing rust but not necessarily seal it. Then there is POR15, which will convert the rust and seal it, but what will it do when you weld near it? That's where I am now... It would be cool if Nate Porter or Keith Stephens could weigh in as they might have some insight.

[C10_ustacould]

Replacement dash for Shiro??