1969 Short Wide - Page 28 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mcbassin · 02-22-2012, 10:28 AM

Quote:

Originally Posted by scotts62

Very cool, looks good!

thanks Scott.

Quote:

Originally Posted by screaminchevypickup

Looks good mike!!! Time to start some body work!!

Thanks Kyle, not so fast, still have rust to fix! dang it.

Quote:

Originally Posted by 67c10rustbuket

looks great again mike! Q where did you buy your front floor pan? I have one from classic on I35 but it doesnt have the down brake at the front to match the firewall bottom. I can bend it no prob just annoying having to modify these parts. That and its 1.0mm a little thin. On my parts they range from 1.0mm,1.2mm,1.4mm. mine are all triplus/key parts. I would like atleast 1.2mm floor, do you know what thickness yours was? a lot of times classic will stick they're pn sticker over the triplus sticker. Oh also where are you buying the weld through primer? I cant find any, maybe not looking hard enough. Im waiting to finishing mine after buying a bottle so I dont loose the rest of my hair on the flux core.

thanks Dan,
I bought the floor pans from Kenny's trucks but they are the same as LMC. It is pretty thin like .035" thick I think? (not correct to the oem) Mine didn't have the brake at the front either. If you are doing a short repair like I did on the driver side it's not too bad. But because the panel shape is off it pulled when I got it where it need to be at the seam. In hindsite, I should have left the gap at the front seam and made the floor match. I had no less than 15 hours in just the front pan and kick panel (another POS!).

The UPOL weld through primer I ordered online. HERE is where I got mine from. It was 2 years ago though. You may be able to find it somewhere else cheaper? I haven't seen it locally, but maybe one of OKC car paint stores carry it?

Quote:

Originally Posted by Crash_OK

Looks great Mike... I am glad you are almost done with the floor.. I feel your pain on the parts and how they fit... I look forward to seeing how you attack the rest of the rust...

Have a great day..

Thanks Mark, I know you know how frustrating the rust repair is. I saw your build! I am back on the rust attack tonight.

Quote:

Originally Posted by 68 Four on the Floor

Looks good Mike. I need a spot welded like that.

Thanks Drew, You are welcome to use mine any time. The passenger side didn't spot weld as good as the driver. I'm not sure if I waited too long after the weld through primer was added or what? I ended up drilling and mig welding half of it. When I "tweaked" the rocker it broke several of the spot welds. Ideally, I think bare metal to metal works the best for spot welds but I was worried about rust starting right away so I coated both with the Upol.

Crash_OK · 02-22-2012, 10:37 AM

Quote:

Originally Posted by mcbassin

thanks Scott.

Thanks Mark, I know you know how frustrating the rust repair is. I saw your build! I am back on the rust attack tonight.

Are you working tonight, or are you watch the bedlam game?

mcbassin · 02-22-2012, 12:56 PM

Quote:

Originally Posted by Crash_OK

Are you working tonight, or are you watch the bedlam game?

Definetly NOT watching the bedlem round two

nuke1 · 02-22-2012, 09:36 AM

Gotta love rust!

**67cheby** · 02-22-2012, 10:23 AM

nice work , looks great !

Bennett68C10 · 02-22-2012, 04:49 PM

You do some nice work Mike, looks great
Posted via Mobile Device

mcbassin · 02-23-2012, 01:18 AM

Quote:

Originally Posted by nuke1

Gotta love rust!

Love to hate it.

Quote:

Originally Posted by 67cheby

nice work , looks great !

Thanks Mike.

Quote:

Originally Posted by Bennett--G4L

You do some nice work Mike, looks great]

thanks Keith, It's kinda funny how a series of pictures on here make it look like a few hours of work

Fact is I saw too many guys pictures and figured well that looks like a few weekends worth of work.......

Bennett68C10 · 02-23-2012, 09:21 AM

I hear you Mike, I wish it was a few weekends. My few weekends has turned into 2 years so far

my67chevytruck · 02-23-2012, 12:21 PM

nice work Mike, I am not looking forward to the cab repairs i need in the K10 !!

bjcaldwe · 02-23-2012, 08:53 PM

Looking good Mike.

mcbassin · 02-24-2012, 12:22 AM

Quote:

Originally Posted by my67chevytruck

nice work Mike, I am not looking forward to the cab repairs i need in the K10 !!

Thanks for stopping by Heath. I would recommend you buy a Western dry county "rust free" cab. Save yourself some pain, mentally and physically

I honestly think I would buy a semi truck load of them if I could find a deal on them. I have no doubt they would sell. Back when I first started working on these old trucks you could find them pretty easy around here only needing rockers. Now.....good luck.

Quote:

Originally Posted by bjcaldwe

Looking good Mike.

Thanks Billy. How's your build going?

bjcaldwe · 02-24-2012, 12:25 AM

It is ok. I haven't worked on it recently but did buy my steering rack today. So, little by little I am at least getting the parts.

mcbassin · 02-24-2012, 12:51 AM

Quote:

Originally Posted by bjcaldwe

It is ok. I haven't worked on it recently but did buy my steering rack today. So, little by little I am at least getting the parts.

Cool glad to hear you are getting some new parts. You have a really nice suspension setup on your truck. Looking forward to new updates.

mcbassin · 02-24-2012, 01:10 AM

Hey fellow board members I have a little poll here, I am working on my plans for paint. I'm pretty well set on what I want but I wonder if I'm just getting old? Anyway, which do you like better? Keep in mind, I have 3" X 5" drop and will have Polished Coy's (18-20") or Polished Billets??? (18-20"). Sorry I don't have photoshop skills or I would make a mock up of each one.
Opinions

Solid red (not Porche red but Victory Gm)?
Victory Red with white cap and middle?
Solid Black?

Name: chevy.jpg
Views: 1806
Size: 102.0 KB

Name: chevy1.jpg
Views: 1622
Size: 103.5 KB

Name: chevy4.jpg
Views: 1631
Size: 40.2 KB

Name: 72bbtyruc2010004.jpg
Views: 1735
Size: 81.3 KB

67c10rustbuket · 02-24-2012, 01:23 AM

I like the second pic
*polished billets
*red/white top/white center
also noticed that one painted the front windshield pillars and door window frames white. I like that better than the roof on the first.

71Sleeper · 02-24-2012, 02:18 AM

Quote:

Originally Posted by 67c10rustbuket

I like the second pic
*polished billets
*red/white top/white center
also noticed that one painted the front windshield pillars and door window frames white. I like that better than the roof on the first.

x2

**fakerwade** · 02-24-2012, 03:36 AM

I'm kinda partial to black, but #2 looks cool too. (decisions, decisions)

68 TT · 02-25-2012, 06:33 AM

Quote:

Originally Posted by 67c10rustbuket

I like the second pic
*polished billets
*red/white top/white center
also noticed that one painted the front windshield pillars and door window frames white. I like that better than the roof on the first.

x2

I like the painted pillars & door glass frame.

68 TT · 02-25-2012, 06:37 AM

Nice looking mirrors. Are those the 71-72 sport mirrors or something else?

I am going to use 68-69 Camaro mirrors on mine that look similar but the mirror head is just a little different.

mcbassin · 02-25-2012, 01:13 PM

Quote:

Originally Posted by 68 Four on the Floor

I love that pic. Wish we had some hills or something around here so i could get some purdy pics when mines done.

Me too. I guess I could go to southwest OK there are some hills down there

Quote:

Originally Posted by 67c10rustbuket

I thought that pic (#2) looked a little orange, but yes red like the new pic. that looks super nice!

as long as its not crimson, whats wrong with orange ? he he he. Just kidding I like them both, you won the basket ball game. later

It's all good brother. I love the hugger orange trucks. Just not in my color category

Quote:

Originally Posted by 68 TT

Nice looking mirrors. Are those the 71-72 sport mirrors or something else?

I am going to use 68-69 Camaro mirrors on mine that look similar but the mirror head is just a little different.

I'm using 71-72 sport mirrors. so far I have only the RH side NOS. Still looking for a deal on the LH side.

**screaminchevypickup** · 02-24-2012, 03:40 AM

The second pic looks good!!! But I wouldn't run 18s up front they look like s#^! in my opinion!!!
Posted via Mobile Device

mcbassin · 02-24-2012, 09:28 AM

Quote:

Originally Posted by screaminchevypickup

The second pic looks good!!! But I wouldn't run 18s up front they look like s#^! in my opinion!!!
Posted via Mobile Device

FYI, I will either run 18" X 10 rear and 18" X 8 front or
20"X10 rear and 20"X8 front. Staggard width and tire not wheel diameter size. I should have made that clear.

fencepost · 02-24-2012, 09:35 AM

I guess I'm odd I like solid colors I'd go all black. But if I just had to go 2-tone the 2nd pic would be mine.

VA72C10 · 02-24-2012, 03:42 AM

Second pic

Crash_OK · 02-24-2012, 07:20 AM

solid Red...

02-22-2012, 09:36 AM	#4
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: 1969 Short Wide Gotta love rust! __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

02-22-2012, 10:23 AM	#5
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1969 Short Wide nice work , looks great ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-22-2012, 04:49 PM	#6
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: 1969 Short Wide You do some nice work Mike, looks great Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

02-23-2012, 09:21 AM	#8
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: 1969 Short Wide I hear you Mike, I wish it was a few weekends. My few weekends has turned into 2 years so far __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

02-23-2012, 12:21 PM	#9
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: 1969 Short Wide nice work Mike, I am not looking forward to the cab repairs i need in the K10 !! __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

02-23-2012, 08:53 PM	#10
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: 1969 Short Wide Looking good Mike. __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

02-24-2012, 12:25 AM	#12
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: 1969 Short Wide It is ok. I haven't worked on it recently but did buy my steering rack today. So, little by little I am at least getting the parts. __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

02-24-2012, 01:10 AM	#14
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1969 Short Wide Hey fellow board members I have a little poll here, I am working on my plans for paint. I'm pretty well set on what I want but I wonder if I'm just getting old? Anyway, which do you like better? Keep in mind, I have 3" X 5" drop and will have Polished Coy's (18-20") or Polished Billets??? (18-20"). Sorry I don't have photoshop skills or I would make a mock up of each one. Opinions Solid red (not Porche red but Victory Gm)? Victory Red with white cap and middle? Solid Black? Attached Images __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

02-24-2012, 01:23 AM	#15
67c10rustbuket Registered User Join Date: Apr 2011 Location: Mustang, Oklahoma Posts: 2,806	Re: 1969 Short Wide I like the second pic polished billets red/white top/white center also noticed that one painted the front windshield pillars and door window frames white. I like that better than the roof on the first. __________________ Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car

02-24-2012, 03:36 AM	#17
fakerwade Senior Member Join Date: Oct 2011 Location: Lewiston, ID. Posts: 627	Re: 1969 Short Wide I'm kinda partial to black, but #2 looks cool too. (decisions, decisions) __________________ Wade , JUST WALK AWAY, AND I'LL SPARE YOUR LIVES!!! , Build thread "TANGERINE" http://67-72chevytrucks.com/vboard/s...d.php?t=498570 Board Members Met: bigblock68, ol_skool_chevy ,68TT,atvpro

02-25-2012, 06:37 AM	#19
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: 1969 Short Wide Nice looking mirrors. Are those the 71-72 sport mirrors or something else? I am going to use 68-69 Camaro mirrors on mine that look similar but the mirror head is just a little different. __________________ miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars

02-24-2012, 03:40 AM	#21
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: 1969 Short Wide The second pic looks good!!! But I wouldn't run 18s up front they look like s#^! in my opinion!!! Posted via Mobile Device __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629 Last edited by screaminchevypickup; 02-24-2012 at 09:13 AM.

02-24-2012, 09:35 AM	#23
fencepost Registered User Join Date: Jan 2010 Location: Hamilton, AL Posts: 189	Re: 1969 Short Wide I guess I'm odd I like solid colors I'd go all black. But if I just had to go 2-tone the 2nd pic would be mine.

02-24-2012, 03:42 AM	#24
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 1969 Short Wide Second pic __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-24-2012, 07:20 AM	#25
Crash_OK Registered User Join Date: Nov 2011 Location: Edmond, OK. Posts: 1,362	Re: 1969 Short Wide solid Red... __________________ Mark ----------------------- Crash's 69 4x4 SWB Crash's Roof over Lake Home Crash's 1988 Land Cruiser Build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.