How about some pics of bagged C-10's - Page 28 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**kev2809** · 04-11-2010, 01:26 AM

looks good. so that's static dropped?

molinehotrod · 04-11-2010, 10:43 AM

yes it is with a lot of work

ksbrktracer · 04-11-2010, 11:06 AM

Quote:

Originally Posted by molinehotrod

yes it is with a lot of work

so tell us......how is it dropped.....?

ksbrktracer · 04-11-2010, 11:09 AM

I see the other thread now....!

**kev2809** · 04-11-2010, 12:06 PM

heres from the other thread

"guys i've got drop spindals,drop springs that i cut a coil off, then i moved the cross member up in the rails 2 inches, notched front rail for steering to clear, moved shock mounts,new motor mounts, new trans cross member, new trailing arm cross member, new rear shock mount cross member, z'd rear frame 4 1/2 inches and you cant tell, when i z'd the frame i did it vey tasfully, you can look at it not tell that it is z'd, i have 4 inch drop blocks and drop springs. The front i had to narrow the front a arms 1 1/2 inches so that i could turn. I work at a rod shop and we had a customer that wanted air ride, so we got him the rear air bar kit and front a-arms and bags with drop spindals, and all the digital controls, i think the kit was like 6500 from air ride, well he was upset that he was aired out and i was two inches lower than him. I've got about 200 in steel to get the frame down. i already had all the springs and spindals."

AVS_JASON · 04-12-2010, 10:51 AM

Ok, here is my truck. FINALLY, got the dropmember and arms installed. Just need to get the exhaust raised, hopefully today. Will get a lot lower then this.

**67cheby** · 04-12-2010, 10:58 AM

nice square body

XtremeBowtie · 05-04-2010, 11:49 AM

Quote:

Originally Posted by AVS_JASON

Ok, here is my truck. FINALLY, got the dropmember and arms installed. Just need to get the exhaust raised, hopefully today. Will get a lot lower then this.

Any updates?

AVS_JASON · 05-04-2010, 01:45 PM

Quote:

Originally Posted by XtremeBowtie

Any updates?

Just got the exhaust reworked. Still gotta do a few lil things to get it where I want. But its my daily and drives and rides awesome.

**67cheby** · 05-04-2010, 01:47 PM

love that square body, im gonna have to do one of those

XtremeBowtie · 05-04-2010, 02:53 PM

Quote:

Originally Posted by AVS_JASON

Just got the exhaust reworked. Still gotta do a few lil things to get it where I want. But its my daily and drives and rides awesome.

Lookin good!

I can't wait to get started on mine. I'm so jealous!

fpjr0 · 04-26-2010, 10:03 PM

just looked thru all the pages of this thread,, and let me tell you fellas I HATE you on the most friendly way that is.... I just decided I am going to bag my 84 swb just cant decide if I want to c or spet notch... I guess I am a sissy for being scarreeeeeeeeeeeee about step notch anyways .... nice trucks guys make me feel lesss lol

West Texas Z · 04-28-2010, 03:12 AM

Whats the lowest one can go with out cutting the bed?

Thanks in advance.

roofingbloke · 04-30-2010, 05:03 PM

Hi Guys, Please explain the termination schraeder valves as this is new to me ? roofer from the UK

**67cheby** · 04-30-2010, 05:10 PM

a schrader valve is like a valve on a tire, a way to manually fill your bags

jmedero · 05-04-2010, 12:10 AM

Wooo Hoooo!! I can finally put my self on the bagged side of the forum. Got the front done and will start the rear on Friday. Top of the wheel well sits at 32 inches when fully aired up and 24 when aired out. 3/8 smc valves, 3/8 lines, AVS 7 switch box... ect. ECE drop spinds, doms 2600's, and 4 wheels disc's.

**67cheby** · 05-04-2010, 09:27 AM

nice ... i love the suburbans

West Texas Z · 05-04-2010, 11:38 AM

Quote:

Originally Posted by West Texas Z

Whats the lowest one can go with out cutting the bed?

Thanks in advance.

bump.

**67cheby** · 05-04-2010, 11:49 AM

i think this was with my pumpkin touching the bed floor

gixxerpymp · 05-05-2010, 11:25 PM

Quote:

Originally Posted by West Texas Z

Whats the lowest one can go with out cutting the bed?

Thanks in advance.

Strodder · 05-06-2010, 12:14 PM

Quote:

Originally Posted by gixxerpymp

Nice truck. Love the color.

69Rob · 05-09-2010, 01:20 AM

Here is my 86 still got more work to do. tubed to lay out on 22's will lay out on the new 24's when i get out the tubs

Blitz · 05-09-2010, 02:28 PM

What size rims are those on the blue truck? That would make a slight difference too.

**kev2809** · 05-06-2010, 06:01 AM

any suspension pics? I thought that truck had a dropmember..

scotts62 · 05-06-2010, 08:00 AM

Good looking truck, looks good with the wheels it has on it!

04-11-2010, 01:26 AM	#1
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,143	Re: How about some pics of bagged C-10's looks good. so that's static dropped? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

04-11-2010, 10:43 AM	#2
molinehotrod Registered User Join Date: Jan 2008 Location: salina,ks Posts: 30	Re: How about some pics of bagged C-10's yes it is with a lot of work

04-11-2010, 11:09 AM	#4
ksbrktracer TNT-MOTORSPORTS Join Date: Mar 2008 Location: TULSA OKLAHOMA Posts: 2,692	Re: How about some pics of bagged C-10's I see the other thread now....!

04-11-2010, 12:06 PM	#5
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,143	Re: How about some pics of bagged C-10's heres from the other thread "guys i've got drop spindals,drop springs that i cut a coil off, then i moved the cross member up in the rails 2 inches, notched front rail for steering to clear, moved shock mounts,new motor mounts, new trans cross member, new trailing arm cross member, new rear shock mount cross member, z'd rear frame 4 1/2 inches and you cant tell, when i z'd the frame i did it vey tasfully, you can look at it not tell that it is z'd, i have 4 inch drop blocks and drop springs. The front i had to narrow the front a arms 1 1/2 inches so that i could turn. I work at a rod shop and we had a customer that wanted air ride, so we got him the rear air bar kit and front a-arms and bags with drop spindals, and all the digital controls, i think the kit was like 6500 from air ride, well he was upset that he was aired out and i was two inches lower than him. I've got about 200 in steel to get the frame down. i already had all the springs and spindals." __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

04-12-2010, 10:51 AM	#6
AVS_JASON AIRBAGPARTS.COM Join Date: Dec 2008 Location: CEN CAL Posts: 520	Re: How about some pics of bagged C-10's Ok, here is my truck. FINALLY, got the dropmember and arms installed. Just need to get the exhaust raised, hopefully today. Will get a lot lower then this. Last edited by AVS_JASON; 04-12-2010 at 10:53 AM.

04-12-2010, 10:58 AM	#7
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How about some pics of bagged C-10's nice square body __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-04-2010, 01:47 PM	#10
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How about some pics of bagged C-10's love that square body, im gonna have to do one of those __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

04-26-2010, 10:03 PM	#12
fpjr0 Registered User Join Date: Mar 2009 Location: san antonio tx Posts: 202	Re: How about some pics of bagged C-10's just looked thru all the pages of this thread,, and let me tell you fellas I HATE you on the most friendly way that is.... I just decided I am going to bag my 84 swb just cant decide if I want to c or spet notch... I guess I am a sissy for being scarreeeeeeeeeeeee about step notch anyways .... nice trucks guys make me feel lesss lol __________________ ONCE YOU GO LS, YOU NEVER WANT LESS!!

04-28-2010, 03:12 AM	#13
West Texas Z El Mero Mero Frijolero!! Join Date: Mar 2010 Location: Lubbock, Texas Posts: 669	Re: How about some pics of bagged C-10's Whats the lowest one can go with out cutting the bed? Thanks in advance. __________________ My Toys: 1993 Ford Mustang LX 5.0 2001 Yamaha V Star 650 1984 Silverado > Build Page <

04-30-2010, 05:03 PM	#14
roofingbloke Registered User Join Date: Apr 2009 Location: swindon, england Posts: 290	Re: How about some pics of bagged C-10's Hi Guys, Please explain the termination schraeder valves as this is new to me ? roofer from the UK

04-30-2010, 05:10 PM	#15
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How about some pics of bagged C-10's a schrader valve is like a valve on a tire, a way to manually fill your bags __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-04-2010, 12:10 AM	#16
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: How about some pics of bagged C-10's Wooo Hoooo!! I can finally put my self on the bagged side of the forum. Got the front done and will start the rear on Friday. Top of the wheel well sits at 32 inches when fully aired up and 24 when aired out. 3/8 smc valves, 3/8 lines, AVS 7 switch box... ect. ECE drop spinds, doms 2600's, and 4 wheels disc's. Attached Images __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

05-04-2010, 09:27 AM	#17
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How about some pics of bagged C-10's nice ... i love the suburbans __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-04-2010, 11:49 AM	#19
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How about some pics of bagged C-10's i think this was with my pumpkin touching the bed floor Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-09-2010, 01:20 AM	#22
69Rob Registered User Join Date: Oct 2008 Location: Houston, Tx Posts: 182	Re: How about some pics of bagged C-10's Here is my 86 still got more work to do. tubed to lay out on 22's will lay out on the new 24's when i get out the tubs Attached Images __________________ 2009 dodge hemi custom paint 86 lwb bagged layin frame 73 2 door nova 54 bel air



Register or Log In To remove these advertisements.

05-09-2010, 02:28 PM	#23
Blitz Mr. Thread Killer Join Date: Dec 2008 Location: Norcross, GA Posts: 388	Re: How about some pics of bagged C-10's What size rims are those on the blue truck? That would make a slight difference too.

05-06-2010, 06:01 AM	#24
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,143	Re: How about some pics of bagged C-10's any suspension pics? I thought that truck had a dropmember.. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-06-2010, 08:00 AM	#25
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: How about some pics of bagged C-10's Good looking truck, looks good with the wheels it has on it! __________________ Scott 93 crew cab build Project 62

Register or Log In To remove these advertisements.