Mesquite 1966 C10 - LS3 W/Air Ride - Page 28 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mcfarlnd · 05-17-2016, 10:24 AM

Quote:

Originally Posted by 66ChevyMax

I'm anticipating that it will run rich as I have not done any modifications to the computer since I put the Supercharger on. Injectors are LS9, I hope to take a reading with HP Tuners and post and get some information for LS9 injectors in an LS3.

What tuning software are you using? I may have some injector data.

**66ChevyMax** · 05-17-2016, 10:44 AM

HP Tuner

Quote:

Originally Posted by mcfarlnd

What tuning software are you using? I may have some injector data.

**Hart_Rod** · 05-17-2016, 11:58 AM

Quote:

Originally Posted by 66ChevyMax

Busy day in the shop, got the ignition hooked up and turned her over for the first time with an actual key.

All the air ride is hooked up and working, got all of the Dakota Gauges Cluster hooked up.

Still need to install seat, head liner, wiring for A/C and all lights, exterior trim on doors and front fenders.

She's ready to be started again, need to do a one over on all the wires to make sure there are no conflicts with belts and headers.

I'm anticipating that it will run rich as I have not done any modifications to the computer since I put the Supercharger on. Injectors are LS9, I hope to take a reading with HP Tuners and post and get some information for LS9 injectors in an LS3.

My plan for now is to do some light tuning so I can drive it to have the exhaust installed. Final tuning will be on a dyno by people who know what they are doing!

Small piece of advice, get your exhaust done prior to any tuning.....be there done that!

http://www.hptuners.com/forum/showth...+injector+data
http://www.hptuners.com/forum/showth...+injector+data

**66ChevyMax** · 05-17-2016, 12:18 PM

For sure, thank for the warning!

Quote:

Originally Posted by Hart_Rod

Small piece of advice, get your exhaust done prior to any tuning.....be there done that!

http://www.hptuners.com/forum/showth...+injector+data
http://www.hptuners.com/forum/showth...+injector+data

siggyfreud · 05-15-2016, 11:29 PM

Looking awesome! So much attention to detail in this build. Really liking how clean the wiring turned out. If I can get mine half as clean I'll be happy.

**66ChevyMax** · 05-15-2016, 11:55 PM

Thanks Sig,

I really like this wiring kit, American Autowire 500560, color coding is great and every wire has the function printed right on the wire. There was an issue with the starter solenoid wiring as the instructions weren't as clear as they could have been about the optional neutral safety switch wiring.

Quote:

Originally Posted by siggyfreud

Looking awesome! So much attention to detail in this build. Really liking how clean the wiring turned out. If I can get mine half as clean I'll be happy.

siggyfreud · 05-16-2016, 12:12 AM

I think that's the kit I'm using too. How did you mount it in the cab? Seems like the wires stick out the back too much to mount flush. Almost like there was supposed to be a backside to it or something.

**66ChevyMax** · 05-16-2016, 10:41 PM

You are correct, there is a back plate that mounts to the upper inner finder bolts. The kit include two new longer bolts:

Quote:

Originally Posted by siggyfreud

I think that's the kit I'm using too. How did you mount it in the cab? Seems like the wires stick out the back too much to mount flush. Almost like there was supposed to be a backside to it or something.

66-PMD-GMC · 05-16-2016, 09:32 AM

Head liner??

**66ChevyMax** · 05-16-2016, 04:10 PM

Yes I will send pics when installed

Quote:

Originally Posted by 66-PMD-GMC

Head liner??

**66ChevyMax** · 05-16-2016, 10:39 PM

Here's a before install photo:

Quote:

Originally Posted by 66ChevyMax

Yes I will send pics when installed

**66ChevyMax** · 05-16-2016, 10:48 PM

Ok she fired right up but had to cut things short because of a 2 power steering issues, a small leak and the power steering lines were jumping around and pump made a funny noise.

Reservoir may have been pulled dry once lines filled up but not sure that was it.

Can I get a plumbing check?

Power steering pump has a #6 and #10 fitting:

From pump #6 to passenger side of hydro boost, exit drivers side of hydro boost to passenger side of power steering gear box, exit power steering box on drivers side and tee into return from hydro boost to #6 side of reservoir, #10 of reservoir to #10 on power steering pump.

Thanks for the help!

**66ChevyMax** · 05-17-2016, 11:57 AM

Answered my own plumbing question, I have the hydroboost inlet and outlet backwards

**66ChevyMax** · 05-19-2016, 12:37 PM

Seat is in and headliner is in, hard to get a good picture of the headliner indoors:

greg65 · 05-19-2016, 01:43 PM

Very nice work.

**Advanced Design** · 05-19-2016, 08:45 PM

Looks good, sounds good, awesome work!

**66ChevyMax** · 05-21-2016, 12:19 AM

Thanks Greg, its been a long time coming!

Quote:

Originally Posted by greg65

Very nice work.

Thanks for checking in Doug!

Quote:

Originally Posted by Advanced Design

Looks good, sounds good, awesome work!

**66ChevyMax** · 05-21-2016, 12:23 AM

Playing with some tuning, just injector data so far. Haven't actually uploaded it yet, trying to get approval from those who know what they are doing first

Was going to attached tune files but uploader says invalid file type?

chad64chevy · 05-21-2016, 07:41 AM

man it just gets better an better, interior looks good too

**66ChevyMax** · 05-21-2016, 11:59 AM

Thanks Chad

**66ChevyMax** · 05-21-2016, 06:24 PM

Talked to Magnuson and the person actually looked up my order instead of guessing, Injectors are Deatsch Werks 16U-00-0065-8 65lbs, they have data on their site.

Anyone know why the forum won't let me upload .hpt files?

**Advanced Design** · 05-21-2016, 10:28 PM

Quote:

Originally Posted by 66ChevyMax

Talked to Magnuson and the person actually looked up my order instead of guessing, Injectors are Deatsch Werks 16U-00-0065-8 65lbs, they have data on their site.

Anyone know why the forum won't let me upload .hpt files?

My guess is because .hpt isn't one of the allowed file types. It isn't shown on the upload list.

**66ChevyMax** · 05-21-2016, 11:35 PM

Bummer

ChuckLee · 05-23-2016, 12:11 AM

Thank you for the well-documented and inspiring build! Time for me to get to work. I have a 69 longbed c10 with a 355 and a manual Mid 80's Iroc tranny. I'm going to LS swap it and REALLY want a t56 over an auto. Need all the inspiration I can get, especially with keeping a manual.

**66ChevyMax** · 05-23-2016, 01:01 AM

Thanks for checking in and the kind words Chuck. This is my 4th build and everyone of them had a manual when done. You just can't beat being in control of those RPM'S!

Look forward to seeing you build, good luck!

Quote:

Originally Posted by ChuckLee

Thank you for the well-documented and inspiring build! Time for me to get to work. I have a 69 longbed c10 with a 355 and a manual Mid 80's Iroc tranny. I'm going to LS swap it and REALLY want a t56 over an auto. Need all the inspiration I can get, especially with keeping a manual.

05-15-2016, 11:29 PM	#5
siggyfreud Registered User Join Date: Jun 2012 Location: Portland Posts: 1,330	Re: Mesquite 1966 C10 - LS3 W/Air Ride Looking awesome! So much attention to detail in this build. Really liking how clean the wiring turned out. If I can get mine half as clean I'll be happy. __________________ Current Build - Project "Ghost of Poseidon" 72 C10 Pro-touring build Previous Build - 66 GMC Pro-touring build. Sold.

05-16-2016, 12:12 AM	#7
siggyfreud Registered User Join Date: Jun 2012 Location: Portland Posts: 1,330	Re: Mesquite 1966 C10 - LS3 W/Air Ride I think that's the kit I'm using too. How did you mount it in the cab? Seems like the wires stick out the back too much to mount flush. Almost like there was supposed to be a backside to it or something. __________________ Current Build - Project "Ghost of Poseidon" 72 C10 Pro-touring build Previous Build - 66 GMC Pro-touring build. Sold.

05-16-2016, 09:32 AM	#9
66-PMD-GMC The 60-66 GMC/Pontiac guy.... Join Date: Oct 2010 Location: Apache Junction, Arizona Posts: 1,306	Re: Mesquite 1966 C10 - LS3 W/Air Ride Head liner?? __________________ Building Genuine Pontiac Firepowered cars and trucks for several decades. Why Pontiac?? That's just me daring to be different. Projects.. 63 C10 Short Wheel Base fleetside (The Pro-Street) currently under reconstruction. 440CID 2X4 Pontiac

05-16-2016, 10:48 PM	#12
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: Mesquite 1966 C10 - LS3 W/Air Ride Ok she fired right up but had to cut things short because of a 2 power steering issues, a small leak and the power steering lines were jumping around and pump made a funny noise. Reservoir may have been pulled dry once lines filled up but not sure that was it. Can I get a plumbing check? Power steering pump has a #6 and #10 fitting: From pump #6 to passenger side of hydro boost, exit drivers side of hydro boost to passenger side of power steering gear box, exit power steering box on drivers side and tee into return from hydro boost to #6 side of reservoir, #10 of reservoir to #10 on power steering pump. Thanks for the help! __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

05-17-2016, 11:57 AM	#13
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: Mesquite 1966 C10 - LS3 W/Air Ride Answered my own plumbing question, I have the hydroboost inlet and outlet backwards __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

05-19-2016, 12:37 PM	#14
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: Mesquite 1966 C10 - LS3 W/Air Ride Seat is in and headliner is in, hard to get a good picture of the headliner indoors: __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

05-19-2016, 01:43 PM	#15
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: Mesquite 1966 C10 - LS3 W/Air Ride Very nice work. __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

05-19-2016, 08:45 PM	#16
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,017	Re: Mesquite 1966 C10 - LS3 W/Air Ride Looks good, sounds good, awesome work! __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

05-21-2016, 12:23 AM	#18
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: Mesquite 1966 C10 - LS3 W/Air Ride Playing with some tuning, just injector data so far. Haven't actually uploaded it yet, trying to get approval from those who know what they are doing first Was going to attached tune files but uploader says invalid file type? __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

05-21-2016, 07:41 AM	#19
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: Mesquite 1966 C10 - LS3 W/Air Ride man it just gets better an better, interior looks good too __________________ my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163

05-21-2016, 11:59 AM	#20
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: Mesquite 1966 C10 - LS3 W/Air Ride Thanks Chad __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

05-21-2016, 06:24 PM	#21
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: Mesquite 1966 C10 - LS3 W/Air Ride Talked to Magnuson and the person actually looked up my order instead of guessing, Injectors are Deatsch Werks 16U-00-0065-8 65lbs, they have data on their site. Anyone know why the forum won't let me upload .hpt files? __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

05-21-2016, 11:35 PM	#23
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: Mesquite 1966 C10 - LS3 W/Air Ride Bummer __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

05-23-2016, 12:11 AM	#24
ChuckLee Registered User Join Date: May 2016 Location: richmond va Posts: 265	Re: Mesquite 1966 C10 - LS3 W/Air Ride Thank you for the well-documented and inspiring build! Time for me to get to work. I have a 69 longbed c10 with a 355 and a manual Mid 80's Iroc tranny. I'm going to LS swap it and REALLY want a t56 over an auto. Need all the inspiration I can get, especially with keeping a manual.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.