What did you do to your truck today? Chapter II - Page 280 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NoStopN · 07-15-2018, 11:36 AM

Quote:

Originally Posted by weq92f

There's one oddity in there that is worth a closer look...

Appears somebody dressed up a late model, single cab chevy truck in 67/68 sheet metal...

That's what they did. He posted the truck a few days ago on FB to a closed group & said he would be going.

Metaldoc · 07-15-2018, 03:28 PM

So it's a nice 21C in the shop, outside is 32C and 40 with humidity. Gotta love A/C. A good day to get the block honed for the new rings and I honed the lifter holes because of scrapes from the bad lifters.

KevinR · 07-15-2018, 06:59 PM

Putzed around a bit. Greased the clutch linkage...it was getting pretty bad. Then put in new plugs and wires.

jojo-munson · 07-15-2018, 09:15 PM

Fixed my exhaust leak! Replacement exhaust manifold didn't quite match up with the pipe, so I had to get aggressive with it. But now I can drive without fear of passing out at the wheel!

Metaldoc · 07-16-2018, 06:08 AM

Upgrading the factory breather from 2bbl 380cfm to 4bbl 600cfm+ but still looks good.

bill3rail · 07-16-2018, 08:18 AM

Very nice!

I have been looking for a horn for my offset air cleaner, but cannot find one.

Bill

bill3rail · 07-16-2018, 08:19 AM

Very nice!

I have been looking for a horn for my offset air cleaner, but cannot find one.

Bill

Metaldoc · 07-16-2018, 11:53 AM

Quote:

Originally Posted by bill3rail

Very nice!

I have been looking for a horn for my offset air cleaner, but cannot find one.

Bill

Thanks it is hard to find them, I was lucky enough to have a good friend out in Edmonton, AB. Cunuckvetter and he took one off an old factory 2bbl. It keeps my look.

weq92f · 07-16-2018, 12:29 PM

That should make it go faster.

-klb

toolboxchev · 07-16-2018, 12:39 PM

Quote:

Originally Posted by weq92f

That should make it go faster.

-klb

If chrome wont get ya home, I have not a doubt that it will fly! Love it!

Jim Boy · 07-16-2018, 03:53 PM

Quote:

Originally Posted by Metaldoc

Thanks it is hard to find them, I was lucky enough to have a good friend out in Sask. and he took one off an old factory 2bbl. It keeps my look.

Enough already with the truck stuff. Get back on the BBQ eh. Have a good one.

Metaldoc · 07-16-2018, 06:51 PM

I took my smoker to the cottage so I have no distractions. I gotta get the truck running. I did get all the frost plugs in, all the pistons cleaned and re-ringed. One good final block cleaning tomorrow and fill it with parts.

72c20customcamper · 07-16-2018, 07:22 PM

Quote:

Originally Posted by Jim Boy

Enough already with the truck stuff. Get back on the BBQ eh. Have a good one.

Did this today . But did someone say bbq? I build towable smokers and home brew equipment . I brew about 90 gallons a month .three barrel or so a month . Plan to go pro soon . Already have the name . Brew and q .

Mikes68C10 · 07-16-2018, 08:26 PM

Quote:

Originally Posted by 72c20customcamper

Did this today . But did someone say bbq? I build towable smokers and home brew equipment . I brew about 90 gallons a month . One barrel or so a month . Plan to go pro soon . Already have the name . Brew and q .

...Brew-B-Que

Jim Boy · 07-16-2018, 10:07 PM

Quote:

Originally Posted by 72c20customcamper

Did this today . But did someone say bbq? I build towable smokers and home brew equipment . I brew about 90 gallons a month .three barrel or so a month . Plan to go pro soon . Already have the name . Brew and q .

Need wheels on those brewing kegs.

72c20customcamper · 07-19-2018, 11:53 AM

My knob on the column shift was missing so I made a new one . Grabbed a piece of black walnut from the wood pile . Cut a hunk out and shaped it up.

Metaldoc · 07-19-2018, 12:14 PM

Quote:

Originally Posted by 72c20customcamper

My knob on the column shift was missing so I made a new one . Grabbed a piece of black walnut from the wood pile . Cut a hunk out and shaped it up.

Looks great but now you're going to have to add walnut accents to the whole interior.

**Ol Blue K20** · 07-19-2018, 01:15 PM

That looks awesome!

Jim Boy · 07-19-2018, 01:24 PM

There might be a market for custom wood knobs? When I did my 38 I didn't like the little knob that came with the car (floor shift) so I wound up using the clear plastic knob off of the shower I took out. Of course I used the cold knob with the C for Chevy. Have a good one.

**robs71** · 07-19-2018, 05:10 PM

did some odds and ends to the daily driver..changed out bent rusted gate,cracked inner grill and had a new exhaust system installed.

stevenfromtexas · 07-21-2018, 10:05 AM

got my A/C lines crimped and installed. called around and found a small shop up the road to charge my system monday.

KQQL IT · 07-21-2018, 10:47 PM

Gained some visibility.

KQQL IT · 07-21-2018, 10:48 PM

No idea why the pictures are sideways

**Steeveedee** · 07-21-2018, 11:22 PM

Took six boxes of guck to the household hazardous waste roundup this morning. Just about rid of all the old paint and such from my FiL's garage. We had to clean it out when we rented the place. Paint marked "10-04"; my, what a fine can of crud. About 4 gallons of quart cans, and a whole bunch of spray paint cans that don't spray. Also finally got rid of the last three gallons of "syrup" from the saddle tanks on my truck. Been putting it off; it's just been sitting there in the can for about 2 years. It was crap when I drained it!

Just got busy...

**3757chevy** · 07-22-2018, 01:54 AM

Drove it to work.

07-15-2018, 03:28 PM	#6977
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: What did you do to your truck today? Chapter II So it's a nice 21C in the shop, outside is 32C and 40 with humidity. Gotta love A/C. A good day to get the block honed for the new rings and I honed the lifter holes because of scrapes from the bad lifters. Attached Images

07-15-2018, 06:59 PM	#6978
KevinR Registered User Join Date: Apr 2011 Location: IN Posts: 55	Re: What did you do to your truck today? Chapter II Putzed around a bit. Greased the clutch linkage...it was getting pretty bad. Then put in new plugs and wires.

07-15-2018, 09:15 PM	#6979
jojo-munson Registered User Join Date: Mar 2018 Location: Madison, WI Posts: 62	Re: What did you do to your truck today? Chapter II Fixed my exhaust leak! Replacement exhaust manifold didn't quite match up with the pipe, so I had to get aggressive with it. But now I can drive without fear of passing out at the wheel!

07-16-2018, 06:08 AM	#6980
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: What did you do to your truck today? Chapter II Upgrading the factory breather from 2bbl 380cfm to 4bbl 600cfm+ but still looks good. Attached Images

07-16-2018, 08:18 AM	#6981
bill3rail Registered User Join Date: Jul 2013 Location: LI, NY 11801 Posts: 1,140	Re: What did you do to your truck today? Chapter II Very nice! I have been looking for a horn for my offset air cleaner, but cannot find one. Bill __________________ 1970 C10 8' Fleetside, L6 250, 3 on the Tree. The most basic of pickup trucks!

07-16-2018, 08:19 AM	#6982
bill3rail Registered User Join Date: Jul 2013 Location: LI, NY 11801 Posts: 1,140	Re: What did you do to your truck today? Chapter II Very nice! I have been looking for a horn for my offset air cleaner, but cannot find one. Bill __________________ 1970 C10 8' Fleetside, L6 250, 3 on the Tree. The most basic of pickup trucks!

07-16-2018, 12:29 PM	#6984
weq92f Registered User Join Date: Oct 2016 Location: Dallas Texas Posts: 3,226	Re: What did you do to your truck today? Chapter II That should make it go faster. -klb __________________ 67 C10 fleet fuel injected '70 402, 700r4, 3.73 posi 07 335 sport turbo 6sp 94 Trans Am GT LT1 6sp posi -- sold after 22yrs 99 540 sport V8 6sp -- sold 73 240z L24 4sp -- given to friend 68 C10 step 350/350 3.73 open -- sold

07-16-2018, 06:51 PM	#6987
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: What did you do to your truck today? Chapter II I took my smoker to the cottage so I have no distractions. I gotta get the truck running. I did get all the frost plugs in, all the pistons cleaned and re-ringed. One good final block cleaning tomorrow and fill it with parts. Attached Images

07-19-2018, 11:53 AM	#6991
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,728	Re: What did you do to your truck today? Chapter II My knob on the column shift was missing so I made a new one . Grabbed a piece of black walnut from the wood pile . Cut a hunk out and shaped it up. Attached Images

07-19-2018, 01:15 PM	#6993
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: What did you do to your truck today? Chapter II That looks awesome! __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

07-19-2018, 01:24 PM	#6994
Jim Boy Registered User Join Date: Nov 2017 Location: Wasaga Beach Ontario Canada Posts: 208	Re: What did you do to your truck today? Chapter II There might be a market for custom wood knobs? When I did my 38 I didn't like the little knob that came with the car (floor shift) so I wound up using the clear plastic knob off of the shower I took out. Of course I used the cold knob with the C for Chevy. Have a good one.

07-19-2018, 05:10 PM	#6995
robs71 Senior Member Join Date: Dec 2011 Location: Reading,Pa. Posts: 440	Re: What did you do to your truck today? Chapter II did some odds and ends to the daily driver..changed out bent rusted gate,cracked inner grill and had a new exhaust system installed. Attached Images __________________

07-21-2018, 10:05 AM	#6996
stevenfromtexas Registered User Join Date: Mar 2013 Location: Hewitt, Texas Posts: 444	Re: What did you do to your truck today? Chapter II got my A/C lines crimped and installed. called around and found a small shop up the road to charge my system monday. __________________ Steven '67 SWB, 250ci, 3OTT.......this is my first build...... I wonder if my grand kids will say, "I would give anything to have my grand dads 2005 Chevrolet Z71"

07-21-2018, 10:47 PM	#6997
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,259	Re: What did you do to your truck today? Chapter II Gained some visibility. Attached Images __________________ " That didnt make it any newer " " Dont antique the equipment "

07-21-2018, 10:48 PM	#6998
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,259	Re: What did you do to your truck today? Chapter II No idea why the pictures are sideways __________________ " That didnt make it any newer " " Dont antique the equipment "



Register or Log In To remove these advertisements.

07-21-2018, 11:22 PM	#6999
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,708	Re: What did you do to your truck today? Chapter II Took six boxes of guck to the household hazardous waste roundup this morning. Just about rid of all the old paint and such from my FiL's garage. We had to clean it out when we rented the place. Paint marked "10-04"; my, what a fine can of crud. About 4 gallons of quart cans, and a whole bunch of spray paint cans that don't spray. Also finally got rid of the last three gallons of "syrup" from the saddle tanks on my truck. Been putting it off; it's just been sitting there in the can for about 2 years. It was crap when I drained it! Just got busy... __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

07-22-2018, 01:54 AM	#7000
3757chevy Senior Member Join Date: Mar 2016 Location: Near Canon City ,Colorado Posts: 4,070	Re: What did you do to your truck today? Chapter II Drove it to work. Attached Images __________________ '35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013) '67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010) My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056 "Another Blue Chevy"(1935) http://67-72chevytrucks.com/vboard/s...d.php?t=799203 '68 Burb...https://67-72chevytrucks.com/vboard/...d.php?t=822994 MIKE

Register or Log In To remove these advertisements.