What did you do to your truck today? Chapter II - Page 282 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72c20customcamper · 07-26-2018, 06:55 PM

Packed the rotor bearings. Fixed the tailgate rattle a few days ago. Cost a wapping 4$ have enough to do probably 100 gates. I used white grease on the trunion works great

PepperTreeGarage · 07-26-2018, 06:56 PM

Quote:

Originally Posted by NoStopN

Oh boy, you just got my attention. I have some questions. First, what brand of brake rotors did you use? Second, what brand of tie rod adjusters are on your truck? And last but not least, what are your plans for the stock parts you took off? If you would like to part with those stock spindles, let me know.

Rotors are Stop Tech~~Tie rod adjusters are Western Chassis~~Moog and Mevotech for the rest of it~~Keeping all the take offs for the time being~~~~~

**dflarsen77** · 07-26-2018, 07:06 PM

Quote:

Originally Posted by 72c20customcamper

Packed the rotor bearings. Fixed the tailgate rattle a few days ago. Cost a wapping 4$ have enough to do probably 100 gates. I used white grease on the trunion works great

So you just stretched a bike tire slice to fit around? It still fits in the hole? And it doesn't scrunch up when you move it?

72c20customcamper · 07-26-2018, 07:11 PM

Quote:

Originally Posted by dflarsen77

So you just stretched a bike tire slice to fit around? It still fits in the hole? And it doesn't scrunch up when you move it?

Yup just a little donut of the tube.
Works like a charm . White grease it well .

NoStopN · 07-26-2018, 07:21 PM

Quote:

Originally Posted by PepperTreeGarage

Rotors are Stop Tech~~Tie rod adjusters are Western Chassis~~Moog and Mevotech for the rest of it~~Keeping all the take offs for the time being~~~~~

That's cool. At least I got some good product photos for the rotors & tie rod adjusters. Thanks for the info.

mygmctruck1 · 07-26-2018, 08:14 PM

Got the power steering box and linkage installed.

OregonNed · 07-27-2018, 10:59 AM

Getting a handle on my latest project

mosel70 · 07-27-2018, 12:58 PM

‘70 stepside, wet sanding clear and getting ready to paint cab. I hope ... it’s hot in Las Vegas. But super fun after 8 months of prep.
Posted via Mobile Device

66clow · 07-27-2018, 01:45 PM

Ordered these, pretty excited!

**Canuckvetter** · 07-27-2018, 04:55 PM

Whitened the smile on the "Redheaded Stepchild"

http://67-72chevytrucks.com/vboard/a...1&d=1532724792

Metaldoc · 07-27-2018, 06:10 PM

[QUOTE=Canuckvetter;8310129]Whitened the smile on the "Redheaded Stepc

http://67-72chevytrucks.com/vboard/a...1&d=1532724792[/QUOTE

They look much more gooder

stevenfromtexas · 07-27-2018, 09:26 PM

Quote:

Originally Posted by Canuckvetter

Whitened the smile on the "Redheaded Stepchild"

http://67-72chevytrucks.com/vboard/a...1&d=1532724792

her a55 looks good too

stevenfromtexas · 07-27-2018, 09:29 PM

finally got my horn.... horning

next up, inspection!!!!!!

VWNate1 · 07-27-2018, 10:19 PM

@ 102* F in the shade it was too hot to work on it so I worked on old Motocycles next to it in the shade instead.....

**Boog** · 07-27-2018, 10:40 PM

Nate I hope you had a big round fan blowing on you while in that heat. I am proud to have a home shop, as hot as it is, but I do remember many a years working up under the big trees out back. We had a bunch of big old pecan trees back then and seems like there was usually a bit of a breeze there.

Metaldoc · 07-28-2018, 12:49 AM

A/C window shaker in the shop and it stays 21.5C or around 70F all year long winter or summer 70F.

'69C-10 · 07-28-2018, 01:15 PM

Didn't all happen in one day, but finally finished.

stevenfromtexas · 07-28-2018, 04:22 PM

partly legal now!! still need tags we are inspected though.....

Metaldoc · 07-28-2018, 05:46 PM

Quote:

Originally Posted by stevenfromtexas

partly legal now!! still need tags we are inspected though.....

Soon the hard work pays off

VWNate1 · 07-28-2018, 07:00 PM

No ;

I don't have a fan out side, I should get one but then I'd have to run a cord out side, etc, etc. ~ the last time I forgot the put the cord away one of the dogs ate it, I'm lucky it wasn't electrocuted .

The heat is miserable so this morning I and an old Friend rode bikes up into the mountains for breakfast, it was hot up there too .

I'm trying to add a photo but it's been downloading for over 15 minutes now.....

72c20customcamper · 07-28-2018, 07:14 PM

Quote:

Originally Posted by '69C-10

Didn't all happen in one day, but finally finished.

Nice. Wish mine was wood .

66clow · 07-28-2018, 07:26 PM

Decided not to spend money on a new gate🤣

72c20customcamper · 07-28-2018, 07:27 PM

Replace the flex fan and found my crank pulley is out of alignment to the water pump ,alt and ps pump. Ps Pump I shimed it out but the alt there is no real way to shim it. Once I get the alt to lime up o the crank I can shim the water pump pulley out.

Econman · 07-28-2018, 07:46 PM

Built up my dolly to get the cab higher off the floor for my painter.

stevenfromtexas · 07-28-2018, 08:46 PM

Quote:

Originally Posted by Metaldoc

Soon the hard work pays off

yes sir!!!

07-26-2018, 06:55 PM	#7026
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,713	Re: What did you do to your truck today? Chapter II Packed the rotor bearings. Fixed the tailgate rattle a few days ago. Cost a wapping 4$ have enough to do probably 100 gates. I used white grease on the trunion works great Attached Images

07-26-2018, 08:14 PM	#7031
mygmctruck1 Registered User Join Date: Jun 2018 Location: Munising,Mi Posts: 360	Re: What did you do to your truck today? Chapter II Got the power steering box and linkage installed.

07-27-2018, 10:59 AM	#7032
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today? Chapter II Getting a handle on my latest project Attached Images __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

07-27-2018, 12:58 PM	#7033
mosel70 Registered User Join Date: Jul 2016 Location: Las Vegas, NV Posts: 116	‘70 stepside, wet sanding clear and getting ready to paint cab. I hope ... it’s hot in Las Vegas. But super fun after 8 months of prep. Posted via Mobile Device Attached Images

07-27-2018, 01:45 PM	#7034
66clow Registered User Join Date: Jun 2012 Location: Clearwater Beach Florida Posts: 872	Re: What did you do to your truck today? Chapter II Ordered these, pretty excited! Attached Images

07-27-2018, 04:55 PM	#7035
Canuckvetter How did I get this OLD! Join Date: Dec 2014 Location: Lamont County, AB, CANADA Posts: 1,047	Re: What did you do to your truck today? Chapter II Whitened the smile on the "Redheaded Stepchild" http://67-72chevytrucks.com/vboard/a...1&d=1532724792 Attached Images __________________ 1967 Oshawa built LWB Fleetside. 327,3 OTT, 515 Vermilion, CST, PS, PB, Shoulder Harness, Tach,Vac, Speed Warning, Choke Delete, Manual Throttle, Fawn interior. Dealer installed A/C 04/2015, N34 Rosewood Wheel 06/2023 Members who I have met personally. Metaldoc, chevnkevin, 62 Longbed, 72LHorn, 72MARIO, YBNORML, TBONE1964, Classic Bowties, Chevemall, Dagnabbitt.

07-27-2018, 06:10 PM	#7036
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: What did you do to your truck today? Chapter II [QUOTE=Canuckvetter;8310129]Whitened the smile on the "Redheaded Stepc http://67-72chevytrucks.com/vboard/a...1&d=1532724792[/QUOTE They look much more gooder __________________ Do it, Do it right, Do it right the first time

07-27-2018, 09:29 PM	#7038
stevenfromtexas Registered User Join Date: Mar 2013 Location: Hewitt, Texas Posts: 444	Re: What did you do to your truck today? Chapter II finally got my horn.... horning next up, inspection!!!!!! __________________ Steven '67 SWB, 250ci, 3OTT.......this is my first build...... I wonder if my grand kids will say, "I would give anything to have my grand dads 2005 Chevrolet Z71"

07-27-2018, 10:19 PM	#7039
VWNate1 Registered User Join Date: Feb 2012 Location: So. Cali. Posts: 2,664	What I did next to my truck today @ 102* F in the shade it was too hot to work on it so I worked on old Motocycles next to it in the shade instead..... __________________ -Nate Geezer '49 3100 235 W/ Muncie SM420 SOLD '69 C/10 shortbed sidemount survivor 250 L6 W/ 350TH

07-27-2018, 10:40 PM	#7040
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,513	Re: What did you do to your truck today? Chapter II Nate I hope you had a big round fan blowing on you while in that heat. I am proud to have a home shop, as hot as it is, but I do remember many a years working up under the big trees out back. We had a bunch of big old pecan trees back then and seems like there was usually a bit of a breeze there. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

07-28-2018, 12:49 AM	#7041
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: What did you do to your truck today? Chapter II A/C window shaker in the shop and it stays 21.5C or around 70F all year long winter or summer 70F. Attached Images __________________ Do it, Do it right, Do it right the first time

07-28-2018, 01:15 PM	#7042
'69C-10 Registered User Join Date: Nov 2012 Location: Freeport, IL Posts: 73	Re: What did you do to your truck today? Chapter II Didn't all happen in one day, but finally finished. __________________ '67 C-10 SWB '18 Sierra Denali '18 Volvo XC90

07-28-2018, 04:22 PM	#7043
stevenfromtexas Registered User Join Date: Mar 2013 Location: Hewitt, Texas Posts: 444	Re: What did you do to your truck today? Chapter II partly legal now!! still need tags we are inspected though..... __________________ Steven '67 SWB, 250ci, 3OTT.......this is my first build...... I wonder if my grand kids will say, "I would give anything to have my grand dads 2005 Chevrolet Z71"

07-28-2018, 07:00 PM	#7045
VWNate1 Registered User Join Date: Feb 2012 Location: So. Cali. Posts: 2,664	STILL Too Hot ! No ; I don't have a fan out side, I should get one but then I'd have to run a cord out side, etc, etc. ~ the last time I forgot the put the cord away one of the dogs ate it, I'm lucky it wasn't electrocuted . The heat is miserable so this morning I and an old Friend rode bikes up into the mountains for breakfast, it was hot up there too . I'm trying to add a photo but it's been downloading for over 15 minutes now..... __________________ -Nate Geezer '49 3100 235 W/ Muncie SM420 SOLD '69 C/10 shortbed sidemount survivor 250 L6 W/ 350TH

07-28-2018, 07:26 PM	#7047
66clow Registered User Join Date: Jun 2012 Location: Clearwater Beach Florida Posts: 872	Re: What did you do to your truck today? Chapter II Decided not to spend money on a new gate🤣 Attached Images



Register or Log In To remove these advertisements.

07-28-2018, 07:27 PM	#7048
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,713	Re: What did you do to your truck today? Chapter II Replace the flex fan and found my crank pulley is out of alignment to the water pump ,alt and ps pump. Ps Pump I shimed it out but the alt there is no real way to shim it. Once I get the alt to lime up o the crank I can shim the water pump pulley out. Attached Images

07-28-2018, 07:46 PM	#7049
Econman Registered User Join Date: Feb 2011 Location: Knoxville, TN Posts: 362	Re: What did you do to your truck today? Chapter II Built up my dolly to get the cab higher off the floor for my painter. Attached Images

Register or Log In To remove these advertisements.