''Project '64 SYT Super Yenko Truck" - Page 29 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jgh64pkup · 11-24-2009, 12:04 AM

well i worked on the chevy trying to get rid of my mufflers so i can get some different ones
these are the ones i wanthttp://cgi.ebay.com/ebaymotors/FlowS...item5631e9dd9e

and i built a tranny crossmember out of 3/8 flat bar and im going to gusset it tomorrow
i think it looks pretty good if i had welded it prettier
ill post up some pics tomorrow
my brand new energy suspension tranny mount already broke (cheap made crap!!!!)

jgh64pkup · 11-24-2009, 12:06 AM

has anyone cut holes out of there trailing arm crossmember and welded pipe in it for the exhaust to go through
im planning on doing this soon
just wanted to know the best way to do it

**ChiefRocka** · 11-24-2009, 12:11 AM

That would be the way to do it...the way I would do it...although, some people just cut and go...

I think Frizzle has some pics.

jgh64pkup · 11-24-2009, 12:14 AM

i have some 1/4 wall 4 inch I.D. pipe that im going to use should fit perfect
would it be easier to do if i cut out the rivets and pulled the crossmember out and did it on the bench

Alan's Classic · 11-24-2009, 12:53 AM

Check out Tommy's BUILD

Strodder · 11-24-2009, 01:35 PM

I subscribed. Now I have to catch up on it. Looks like a nice build.
Glade to see your more active again Allan.

daverod · 11-24-2009, 03:05 PM

Quote:

Originally Posted by jgh64pkup

has anyone cut holes out of there trailing arm crossmember and welded pipe in it for the exhaust to go through
im planning on doing this soon
just wanted to know the best way to do it

4" bimetal holesaw Go to the metel store and have them slice you 2 1" pieces of 4 tube weld in done. I've got pics on my thread

Alan's Classic · 11-24-2009, 03:44 PM

Quote:

Originally Posted by Strodder

Glade to see your more active again Allan.

It's kind of hit and miss right now.

jgh64pkup · 11-24-2009, 05:40 PM

Quote:

Originally Posted by daverod

4" bimetal holesaw Go to the metel store and have them slice you 2 1" pieces of 4 tube weld in done. I've got pics on my thread

the pipe is 4 1/2 in outside diameter
i might have a hloe saw ill have to look

thanks alan for posting up that link

198plus · 11-24-2009, 06:17 PM

No video yet ????????????

jgh64pkup · 11-24-2009, 07:16 PM

i know but ive got the exhaust off right now and my dad gets pissed off when i start it
but i will have some pics later

shortbed70 · 11-24-2009, 07:23 PM

Cut a hole in a piece of plywood you can clamp to the area your wanting to cut to keep the saw centered. and from wondering.

jgh64pkup · 11-24-2009, 07:26 PM

thats a good idea

jgh64pkup · 11-24-2009, 10:49 PM

well i didnt get the pics i got busy cleaning up the mufflers
the guy should be here tomorrow to pick them up

jgh64pkup · 11-25-2009, 10:47 PM

the guy backed out on the mufflers and my dad made me get my truck out of the shop
so no pics or no new mufflers

*highperf4x4* · 11-26-2009, 03:40 AM

bummer

joe231 · 11-26-2009, 12:57 PM

yeah that sucks.....

jgh64pkup · 11-26-2009, 08:48 PM

yep i tacked them back on today just to keep the noise down

jgh64pkup · 11-30-2009, 09:32 PM

well i got the holes cut but im out of argon so ill have to wait to put the pipe in
still tryin to sell my mufflers with no luck
dont ever try to cut the hole with a hole saw in between th framerails and trailing arms that sucks when you destroy your hand

dammitmitchell · 11-30-2009, 11:23 PM

that how you learn

*highperf4x4* · 11-30-2009, 11:39 PM

I'm strong enough to do it one-handed young grasshopper..............

I'm just sayin...............

jgh64pkup · 11-30-2009, 11:43 PM

yeah and how big are your arms
like i said i wouldnt want to piss you off or want to see somebody that pissed you off

tiggamonsta · 11-30-2009, 11:47 PM

It is all about how much pressure you put on the drill.

You never know what is enough, until you know what is more than enough. ~William Blake, Proverbs of Hell

jgh64pkup · 11-30-2009, 11:52 PM

so true it also helps when the hole saw is sharp but after the first hole was cutting the second one was a *****
maybe i was using a wood holesaw
i cant tell the difference

*highperf4x4* · 12-01-2009, 12:07 AM

Quote:

Originally Posted by tiggamonsta

It is all about how much pressure you put on the drill.

You never know what is enough, until you know what is more than enough. ~William Blake, Proverbs of Hell

Quote:

Originally Posted by jgh64pkup

yeah and how big are your arms
like i said i wouldnt want to piss you off or want to see somebody that pissed you off

11-24-2009, 12:04 AM	#701
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: ''Project '64 SYT Super Yenko Truck" well i worked on the chevy trying to get rid of my mufflers so i can get some different ones these are the ones i wanthttp://cgi.ebay.com/ebaymotors/FlowS...item5631e9dd9e and i built a tranny crossmember out of 3/8 flat bar and im going to gusset it tomorrow i think it looks pretty good if i had welded it prettier ill post up some pics tomorrow my brand new energy suspension tranny mount already broke (cheap made crap!!!!) __________________ Gage 1967 C10 Shortbed Stepside

11-24-2009, 12:06 AM	#702
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: ''Project '64 SYT Super Yenko Truck" has anyone cut holes out of there trailing arm crossmember and welded pipe in it for the exhaust to go through im planning on doing this soon just wanted to know the best way to do it __________________ Gage 1967 C10 Shortbed Stepside

11-24-2009, 12:11 AM	#703
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: ''Project '64 SYT Super Yenko Truck" That would be the way to do it...the way I would do it...although, some people just cut and go... I think Frizzle has some pics. __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

11-24-2009, 12:14 AM	#704
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: ''Project '64 SYT Super Yenko Truck" i have some 1/4 wall 4 inch I.D. pipe that im going to use should fit perfect would it be easier to do if i cut out the rivets and pulled the crossmember out and did it on the bench __________________ Gage 1967 C10 Shortbed Stepside

11-24-2009, 12:53 AM	#705
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: ''Project '64 SYT Super Yenko Truck" Check out Tommy's BUILD __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

11-24-2009, 01:35 PM	#706
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: ''Project '64 SYT Super Yenko Truck" I subscribed. Now I have to catch up on it. Looks like a nice build. Glade to see your more active again Allan. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

11-24-2009, 06:17 PM	#710
198plus Registered User Join Date: May 2009 Location: Loganville, Ga. Posts: 1,408	Re: ''Project '64 SYT Super Yenko Truck" No video yet ???????????? Last edited by 198plus; 12-03-2009 at 10:37 PM.

11-24-2009, 07:16 PM	#711
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: ''Project '64 SYT Super Yenko Truck" i know but ive got the exhaust off right now and my dad gets pissed off when i start it but i will have some pics later __________________ Gage 1967 C10 Shortbed Stepside

11-24-2009, 07:23 PM	#712
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: ''Project '64 SYT Super Yenko Truck" Cut a hole in a piece of plywood you can clamp to the area your wanting to cut to keep the saw centered. and from wondering. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

11-24-2009, 07:26 PM	#713
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: ''Project '64 SYT Super Yenko Truck" thats a good idea __________________ Gage 1967 C10 Shortbed Stepside

11-24-2009, 10:49 PM	#714
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: ''Project '64 SYT Super Yenko Truck" well i didnt get the pics i got busy cleaning up the mufflers the guy should be here tomorrow to pick them up __________________ Gage 1967 C10 Shortbed Stepside

11-25-2009, 10:47 PM	#715
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: ''Project '64 SYT Super Yenko Truck" the guy backed out on the mufflers and my dad made me get my truck out of the shop so no pics or no new mufflers __________________ Gage 1967 C10 Shortbed Stepside Last edited by jgh64pkup; 11-25-2009 at 10:48 PM.

11-26-2009, 03:40 AM	#716
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: ''Project '64 SYT Super Yenko Truck" bummer

11-26-2009, 12:57 PM	#717
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: ''Project '64 SYT Super Yenko Truck" yeah that sucks..... __________________ *CHEVY ONLY*

11-26-2009, 08:48 PM	#718
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: ''Project '64 SYT Super Yenko Truck" yep i tacked them back on today just to keep the noise down __________________ Gage 1967 C10 Shortbed Stepside



Register or Log In To remove these advertisements.

11-30-2009, 09:32 PM	#719
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: ''Project '64 SYT Super Yenko Truck" well i got the holes cut but im out of argon so ill have to wait to put the pipe in still tryin to sell my mufflers with no luck dont ever try to cut the hole with a hole saw in between th framerails and trailing arms that sucks when you destroy your hand __________________ Gage 1967 C10 Shortbed Stepside

11-30-2009, 11:23 PM	#720
dammitmitchell the pollock Join Date: May 2008 Location: abilene, texas Posts: 4,423	Re: ''Project '64 SYT Super Yenko Truck" that how you learn __________________ Jack of ALL trades, Master of none.. (but one... procrastination) Army vet 02-08 RIP El Jay! Miss you brother! http://67-72chevytrucks.com/vboard/s...d.php?t=343538 http://67-72chevytrucks.com/vboard/s...d.php?t=386042

11-30-2009, 11:39 PM	#721
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: ''Project '64 SYT Super Yenko Truck" I'm strong enough to do it one-handed young grasshopper.............. I'm just sayin...............

11-30-2009, 11:43 PM	#722
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: ''Project '64 SYT Super Yenko Truck" yeah and how big are your arms like i said i wouldnt want to piss you off or want to see somebody that pissed you off __________________ Gage 1967 C10 Shortbed Stepside

11-30-2009, 11:47 PM	#723
tiggamonsta Registered User Join Date: Aug 2008 Location: Cedar Creek, TX Posts: 167	Re: ''Project '64 SYT Super Yenko Truck" It is all about how much pressure you put on the drill. You never know what is enough, until you know what is more than enough. ~William Blake, Proverbs of Hell

11-30-2009, 11:52 PM	#724
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: ''Project '64 SYT Super Yenko Truck" so true it also helps when the hole saw is sharp but after the first hole was cutting the second one was a ***** maybe i was using a wood holesaw i cant tell the difference __________________ Gage 1967 C10 Shortbed Stepside Last edited by jgh64pkup; 11-30-2009 at 11:53 PM.

Register or Log In To remove these advertisements.