1972 Chevy p/u NewType Build

[NewType72]

I think I may just match you at this point

[Ol Blue K20]

Originally Posted by NewType72

The anxiety is killing me too much cash and not enough progress
Posted via Mobile Device

Best to relax or someone will help relieve ya of the cash, take your time and shop wisely

[NewType72]

My shopping is pretty close to done two motors are picked two trans options are picked headers are pretty much dead set. I just want all the stuff bought and installed. I'm usually patient but I'm so ready to get rid of this motor
Posted via Mobile Device

[Hardesty454]

I may have missed it but what's wrong with your motor?
Posted via Mobile Device

[NewType72]

In short term it's just tired an I don't trust it anymore with the issue last year on the broken balancer and it broke a rocker arm about a month an a half ago
Posted via Mobile Device

[Hardesty454]

Is it bored over? Size block? I'll take that block off your hands if ya don't want it!
Posted via Mobile Device

[NewType72]

Bored .60 over and it's a sbc 350 I've been running it since 2010 I'm just looking to upgrade now but it drives daily
Posted via Mobile Device

[NewType72]

No updates just collecting paychecks really. I did however swap out my old PCV valve and valve cover breather from brand new ones of the same style in hopes that they were just worn out and needed replacing as from what I can tell my only leak being out of the breather from the original PCV valve float not working correctly?? Which would cause blow-by and seepage onto my passenger side valve cover and spark plug wire holder. We shall see how the new ones function this week.
Posted via Mobile Device

[Ol Blue K20]

Originally Posted by NewType72

No updates just collecting paychecks really. I did however swap out my old PCV valve and valve cover breather from brand new ones of the same style in hopes that they were just worn out and needed replacing as from what I can tell my only leak being out of the breather from the original PCV valve float not working correctly?? Which would cause blow-by and seepage onto my passenger side valve cover and spark plug wire holder. We shall see how the new ones function this week.
Posted via Mobile Device

You can always send them my way, no need to collect em

[NewType72]

You want the three year old reject stud in my trash?
Posted via Mobile Device

[NewType72]

Another week gone by thinking I'll just wait it out more and get the 700r4 built strong enough to hold up to whatever HP I have in front of it. going with the mechanical one because there no difference internally aside from how it knows how to apply what and where for shifting. I'll do electronic upgrades on another build I enjoy mine being easy to work on

[NewType72]

Man had it really been half a month since I last posted? That's wild for me

Haven't really done much just driving an enjoying the truck other then the loud clatter noises in the motor which have been that way forever just makes me more sure of a crate motor.

It hasn't been leaking but I found a couple tiny spots recently but i checked my brand new breather and PCV valve and they aren't seeping anymore like the old ones were so I'm going to wash of the block and trans and see how quickly the spots come back. It might just be old oil that finally got down the block so it shouldn't be too much of an issue there.

Steering wheel has been showing a couple cracks from the major repairs so I'm going to pull it some weekend and sand it down and repair and re-prime it as well as look into a new finish texture. The paint is getting sticky in the warm weather so that'll be a no no.

Turlock Sunday swap meet this weekend but I won't be in town I believe could go super early but not sure I wanna wake up
Posted via Mobile Device

[shawno72]

Glad to see your still around Dylan. I too have been just cruising the truck and enjoying the nice weather.

[Ol Blue K20]

glad to hear from ya again, thought ya might be hiding
Posted via Mobile Device
Posted via Mobile Device

[NewType72]

I'm not so sure it's much about hiding and more about working. Either one is boring and repetitive at this point stupid job.

Getting closer negotiations on the crate motor in mind are still going on. Trying not to wear the guy out but he knows I want it.

Think I may try and install a headliner for my truck just to set the interior that much further into looking good I have the trim just need a good headliner to buy anyone know of the better material ones?
Posted via Mobile Device

[NewType72]

Well yesterday morning was umm different to say the least I'll let the pictures explain for themselves





















So it's a 71 Chevy Cheyenne 1/2 ton crate 350/th350 leaf spring longbed. nearly no rust other then a tiny bit of surface rust in the passenger fender cup. runs fairly well a bit of white smoke from an older crate motor. interior is pretty trashed but all gauges work along with lights. all outside markers and turn signals work ( dome and cargo light aren't yet ) you can push the doors closed literally that easy. shes a bit quiet but dang it she a stock survival new tires and now she runs down the road like a caddy. No plans yet but we may stuff some vintage air in her for the summer since it's an A/C cab and get someone excited about it.

[longbed67]

Nice find! but seriously we just went from making the final decision on a crate motor to just getting another truck! lol What did you end up going with on the motor!!!!!! Oh the suspense and drama

[NewType72]

Oh man I shouldn't even tell you about the forward cab peterbuilt in my driveway then!


Posted via Mobile Device
Posted via Mobile Device

[longbed67]

At least tell me you plan on slamming it, giving it a trick paint job and putting a sweet truck hauler behind it....

[Hardesty454]

Oh that things killer. Sounds like you need my big block for it.
Posted via Mobile Device

[NewType72]

Lmao you two. No to both the forward cab is a customer that wanted his trucking business stickers out on it. And the 71 was bought by my father was a great deal and couldn't pass it up at the moment so we plan on flipping it with some goodies as a summer driver for anyone that gets excited about it.
Posted via Mobile Device

[NewType72]

Doing a much needed upgrade tonight so hopefully all goes well on the 72

[SCHRUMGMC]

Pretty awesome truck

[NewType72]

Thanks Caleb she's being a PITA right now though
Posted via Mobile Device

[502ms]

What's happening, Dylan? ^^
Posted via Mobile Device