![]() |
![]() |
#701 |
Registered User
Join Date: Aug 2015
Location: Kelowna, B.C, Canada
Posts: 1,747
|
Re: A 15 year old's project. Rusty 62 stepside
Here is some progress from the weekend. I decided to build a short throw shifter for the t5. First thing I did was drive the pin out of the hole and drilled a new hole exactly 1" above to move the pivot point up 1". Here's a pic with the pin in the newly drilled hole
|
![]() |
![]() |
![]() |
#702 |
Registered User
Join Date: Aug 2015
Location: Kelowna, B.C, Canada
Posts: 1,747
|
Re: A 15 year old's project. Rusty 62 stepside
Then I built a spacer plate out of some 3/16 plate I had laying around. It is exactly 1" thick to offset the amount I moved the pivot point by. This was very time consuming to cut, use the hole saw slowly and weld the two together. It would have been much faster to use aluminum but this is what I had and I made it work. Now all I need are some bolts that are 1" longer and it'll be done
__________________
Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution |
![]() |
![]() |
![]() |
#703 |
Registered User
Join Date: Aug 2015
Location: Kelowna, B.C, Canada
Posts: 1,747
|
Re: A 15 year old's project. Rusty 62 stepside
Progress has been slow lately due to the heat, but this evening I got all the bodywork on the rear drivers side of the cab all wrapped and sprayed it with some old paint to keep the surface rust off and so I could see my results.
|
![]() |
![]() |
![]() |
#704 |
Registered User
Join Date: Aug 2015
Location: Kelowna, B.C, Canada
Posts: 1,747
|
Re: A 15 year old's project. Rusty 62 stepside
I'm pretty satisfied with the metalwork and bodywork that I have done on this corner, this is what it looked like when I bought it. It had a very large dent/crease and the door was sticking out past the rest of the cab by at least a 1/4"
|
![]() |
![]() |
![]() |
#705 |
Registered User
Join Date: Aug 2015
Location: Kelowna, B.C, Canada
Posts: 1,747
|
Re: A 15 year old's project. Rusty 62 stepside
And this is how perfectly flush the door is now, closes with the push of a finger as well
__________________
Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution |
![]() |
![]() |
![]() |
#706 |
Registered User
Join Date: Dec 2015
Location: tarboro nc.
Posts: 400
|
Re: A 15 year old's project. Rusty 62 stepside
your doing some nice work there .
I want to work on my 65 C-10 but I'm still building my friends 65 C-10 for him , I'm doing the cab for his now. it's on a cart on it's back I am getting ready to prime the roof this week , it's all clean bare metal with all the bodywork done . |
![]() |
![]() |
![]() |
#707 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,529
|
Re: A 15 year old's project. Rusty 62 stepside
This is certainly a Rock n Roll build, you just keep on progressing.
Good job on the cab side.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#708 |
State of Confusion!
![]() ![]() Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,862
|
Re: A 15 year old's project. Rusty 62 stepside
You done good son!
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
![]() |
![]() |
![]() |
#709 | ||
Registered User
Join Date: Aug 2015
Location: Kelowna, B.C, Canada
Posts: 1,747
|
Re: A 15 year old's project. Rusty 62 stepside
Quote:
![]() Quote:
Thanks bill. Good to hear from you, it's been awhile.
__________________
Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution |
||
![]() |
![]() |
![]() |
#710 |
Registered User
Join Date: Mar 2014
Location: Cambridge, Ontario
Posts: 507
|
Re: A 15 year old's project. Rusty 62 stepside
I think you'll like the shorter shifter throw... and nice job fixing that big dent.
__________________
* My 63 C10 SWB Fleetside (converted to BBW): http://67-72chevytrucks.com/vboard/s...58#post6851558 @johnny_lamebridge on Instagram ![]() |
![]() |
![]() |
![]() |
#711 |
Post Whore
![]() Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: A 15 year old's project. Rusty 62 stepside
Looks great! Nice job!
![]()
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
![]() |
![]() |
![]() |
#712 | |
Registered User
Join Date: Aug 2015
Location: Kelowna, B.C, Canada
Posts: 1,747
|
Re: A 15 year old's project. Rusty 62 stepside
Quote:
Thanks bud
__________________
Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution |
|
![]() |
![]() |
![]() |
#713 |
State of Confusion!
![]() ![]() Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,862
|
Re: A 15 year old's project. Rusty 62 stepside
Yeah....Kitchen renovation and working at the same time tend to take up your spare moments.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
![]() |
![]() |
![]() |
#714 | |
Registered User
Join Date: Aug 2015
Location: Kelowna, B.C, Canada
Posts: 1,747
|
Re: A 15 year old's project. Rusty 62 stepside
Quote:
![]() I started to begin tackling the passenger cab corner today, I cut the skin off and here is what I'm going to be dealing with. It's a tad bit worse than the drivers side, I'll start work on it tomorrow
__________________
Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution |
|
![]() |
![]() |
![]() |
#715 |
Registered User
Join Date: Mar 2001
Location: RADFORD, VA
Posts: 2,651
|
Re: A 15 year old's project. Rusty 62 stepside
Nice work on the cab corner.. Looking good I know what your saying about the heat the humidity is up here making it feel hotter.. Keep up the good work...
__________________
1964 BBC 402 4x4 ![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#716 | |
Registered User
Join Date: Aug 2015
Location: Kelowna, B.C, Canada
Posts: 1,747
|
Re: A 15 year old's project. Rusty 62 stepside
Quote:
![]()
__________________
Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution |
|
![]() |
![]() |
![]() |
#717 |
Registered User
Join Date: Apr 2015
Location: Port McNeill, B.C.
Posts: 464
|
Re: A 15 year old's project. Rusty 62 stepside
Great job on the body work Nik! Your really getting a eye and a hand for it. Can't wait to see what you do next
![]() |
![]() |
![]() |
![]() |
#718 |
Registered User
Join Date: Aug 2015
Location: Kelowna, B.C, Canada
Posts: 1,747
|
Re: A 15 year old's project. Rusty 62 stepside
Thanks Anthony, in the next couple days I should be starting be axle swap, so first thing on the list will be pulling the old axle out and welding the mounting pads to the new one.
__________________
Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution |
![]() |
![]() |
![]() |
#719 |
Registered User
Join Date: Aug 2015
Location: Kelowna, B.C, Canada
Posts: 1,747
|
Re: A 15 year old's project. Rusty 62 stepside
Hey guys progress will be slow for the next two weeks since I have lots of exams to study for but I brought my rotors in to school today and turned them. They're nice and smooth and look like new, they still have lots of life left on them since the 78 gmc only had about 60,000 miles on it. Here's a before
|
![]() |
![]() |
![]() |
#720 |
Registered User
Join Date: Aug 2015
Location: Kelowna, B.C, Canada
Posts: 1,747
|
Re: A 15 year old's project. Rusty 62 stepside
And here they are all finished up
![]()
__________________
Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution |
![]() |
![]() |
![]() |
#721 |
Registered User
Join Date: Aug 2015
Location: Kelowna, B.C, Canada
Posts: 1,747
|
Re: A 15 year old's project. Rusty 62 stepside
Just cleaned up the hub and painted it
__________________
Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution |
![]() |
![]() |
![]() |
#722 |
Post Whore
![]() Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: A 15 year old's project. Rusty 62 stepside
Nice!!
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
![]() |
![]() |
![]() |
#723 |
Registered User
Join Date: Aug 2015
Location: Kelowna, B.C, Canada
Posts: 1,747
|
Re: A 15 year old's project. Rusty 62 stepside
Thanks tj, all my suspension rebuild parts should be coming soon so I can finally button up the crossmember and get it under my truck
![]()
__________________
Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution |
![]() |
![]() |
![]() |
#724 |
Registered User
Join Date: Aug 2015
Location: Kelowna, B.C, Canada
Posts: 1,747
|
Re: A 15 year old's project. Rusty 62 stepside
Just picked up these brand new replica 39 Ford taillights with blue dots from the local classifieds for $40
![]()
__________________
Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution |
![]() |
![]() |
![]() |
#725 |
State of Confusion!
![]() ![]() Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,862
|
Re: A 15 year old's project. Rusty 62 stepside
Those should look real good!! Nice score.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
![]() |
![]() |
![]() |
Bookmarks |
|
|