67-72 cab corner 6x9 speaker brackets

[bigblock73]

Originally Posted by mkmc69

Just ordered a set from your page. Thank you.

Thank you, brackets are en route!

[mkmc69]

Originally Posted by bigblock73

Thank you, brackets are en route!

Got em today! Thanks for quick shipment!

[bill shanks]

Hi
please send a set which holes ,and cost to ship to Ont Canada
Thanks Bill

[RedRider]

Installed my brackets this week, and I couldn't be happier with how they turned out. As mentioned previously, I had to modify the lower passenger bracket to account for the jack divot, not a big deal. The instructions that Jeff provides are very insightful. I would highly recommend this product.

[Jcfcamaro]

How is the top held in on the 67-72 ?

[bigblock73]

Originally Posted by Jcfcamaro

How is the top held in on the 67-72 ?

screwed in from the back side of the bracket into the cab. Its a hidden mounting point.

[Putzer]

PM'd

[Jcfcamaro]

I'll take a set for my 72 with the speaker holes like the picture on this page.

[gringoloco]

Pulled mine out to re-insulate and re-upholster the cab. Reinstalled without issue, still going strong some 9 years later

[bigblock73]

Originally Posted by gringoloco

Pulled mine out to re-insulate and re-upholster the cab. Reinstalled without issue, still going strong some 9 years later

That makes me incredibly happy to hear, thanks for the update and feedback!

[68shortfleet]

Jeff, are these brackets still available?

[Toxic Orange]

Originally Posted by 68shortfleet

Jeff, are these brackets still available?

Looks like you can order them right on his website:
http://www.73-87.com/Parts/6772Speak...20Brackets.htm

I've been wanting to get these for a while. May be time to get it done.

[68shortfleet]

Originally Posted by Toxic Orange

Looks like you can order them right on his website:
http://www.73-87.com/Parts/6772Speak...20Brackets.htm.

Thank you. I had tried the link in Jeff's post, but the link was dead.

[bigblock73]

Originally Posted by 68shortfleet

Jeff, are these brackets still available?

Sorry for missing this. I am still making them, have them in stock and ready to go. Let me know if you have any questions.

[bigblock73]

Originally Posted by Toxic Orange

Looks like you can order them right on his website:
http://www.73-87.com/Parts/6772Speak...20Brackets.htm

I've been wanting to get these for a while. May be time to get it done.

Thanks for posting the link. Order whenever you are ready, they are in stock and ready to go.

Jeff

[GMC72BB]

Jeff, ordered a pair off your website today,, thanks-Greg

[bigblock73]

Ttt

[thehata1]

Got a package today from Coon Creek! Man, these things are nice. I'm glad I found this post before I spent money with the big guys. Thank you for the parts and prompt shipping!

[bigblock73]

Originally Posted by thehata1

Got a package today from Coon Creek! Man, these things are nice. I'm glad I found this post before I spent money with the big guys. Thank you for the parts and prompt shipping!

Thanks for the nice post, appreciate the feedback! Good luck on your install, post some pics here or send them to me at
Thanks again!

[hdixon]

Originally Posted by bigblock73

I was asked by several to make some 67-72 6x9 speaker brackets, much like the ones I make for the 73-87 line. Well, here they are.

Made of heavy 16 ga steel, laser cut and bent, there brackets fit perfectly into the cab corner and allow you to run some larger, better sounding speakers. These will only work on trucks with relocated gas tanks and jack assemblies. Mounting is easy, with only six holes total to drill. If your truck is currently under construction, you can weld in the bottom mounting brackets, thus requiring two holes only while still allowing easy removal of the brackets if desired. Kit consist of L & R speaker brackets, L & R floor mounting brackets, mounting hardware, and detailed instructions. These come bare steel, and will need typical metal prep and paint prior to installation.

Pictures below are of the prototype test bracket, installed in a junk cab I picked up in order to create these. I just submitted an order for 25 pairs (including three sets with NO holes, for those who want to run component speakers), and should have them in 5-10 business days. I will be able to start shipping them out the following day or two. I am only guaranteeing 25 sets at this time, may do more depending on how these do.

If you would like to pre-order, information is as follows.

Price is $75 shipped to your door anywhere in the lower 48 states, extra anywhere else. I prefer PAYPAL for payment, but I will accept money orders, or cash if picked up in person (will be cheaper as there is no shipping). This is $10 more than the 73-87 brackets, due to the larger size of these, increased packaging and shipping, and additional mounting hardware.

PLEASE reply here AND PM me if you are interested, as I am not on the 67-72 side of the board very much.

15 of sets with holes

9 of sets with NO holes

I have sold over 200 73-87 sets, zero complaints. I am confident you will be pleased with these as well.

Do you still have speaker bracket for sale? I am very interested in a set

[LockDoc]

-
ttt

LockDoc

[bigblock73]

Originally Posted by hdixon

Do you still have speaker bracket for sale? I am very interested in a set

Sure do, here is a direct link to order

http://73-87.com/Parts/6772SpeakerBr...20Brackets.htm

[bigblock73]

Ttt

[hdixon]

Originally Posted by bigblock73

I was asked by several to make some 67-72 6x9 speaker brackets, much like the ones I make for the 73-87 line. Well, here they are.

Made of heavy 16 ga steel, laser cut and bent, there brackets fit perfectly into the cab corner and allow you to run some larger, better sounding speakers. These will only work on trucks with relocated gas tanks and jack assemblies. Mounting is easy, with only six holes total to drill. If your truck is currently under construction, you can weld in the bottom mounting brackets, thus requiring two holes only while still allowing easy removal of the brackets if desired. Kit consist of L & R speaker brackets, L & R floor mounting brackets, mounting hardware, and detailed instructions. These come bare steel, and will need typical metal prep and paint prior to installation.

Pictures below are of the prototype test bracket, installed in a junk cab I picked up in order to create these. I just submitted an order for 25 pairs (including three sets with NO holes, for those who want to run component speakers), and should have them in 5-10 business days. I will be able to start shipping them out the following day or two. I am only guaranteeing 25 sets at this time, may do more depending on how these do.

If you would like to pre-order, information is as follows.

Price is $75 shipped to your door anywhere in the lower 48 states, extra anywhere else. I prefer PAYPAL for payment, but I will accept money orders, or cash if picked up in person (will be cheaper as there is no shipping). This is $10 more than the 73-87 brackets, due to the larger size of these, increased packaging and shipping, and additional mounting hardware.

PLEASE reply here AND PM me if you are interested, as I am not on the 67-72 side of the board very much.

15 of sets with holes

9 of sets with NO holes

I have sold over 200 73-87 sets, zero complaints. I am confident you will be pleased with these as well.

do you still have speaker brackets for a 69 c10?

[bigblock73]

Originally Posted by hdixon

do you still have speaker brackets for a 69 c10?

Sure do.

http://www.73-87.com/Parts/6772Speak...20Brackets.htm