And so it begins................ - Page 29 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

'72customdeluxe · 04-23-2010, 01:20 AM

Aren't you supposed to run hypoid gear oil?

*TheSebring* · 04-23-2010, 01:55 AM

And I like that orange syphon pump you got there. Have to get me one of those

.

*highperf4x4* · 04-23-2010, 02:03 AM

Quote:

Originally Posted by '72customdeluxe

Aren't you supposed to run hypoid gear oil?

I was just kidding. That jug has 80w90 in it.

**scotts62** · 04-23-2010, 07:50 AM

heck yeah just throw the Mobile in it it will be fine

JohnC · 04-23-2010, 09:56 AM

Hope that was your noise, and this corrects it.

**scotts62** · 04-23-2010, 06:11 PM

Doubt it

sourkraut · 04-23-2010, 06:18 PM

looking good travis. any metal floating around in there?

*highperf4x4* · 04-24-2010, 01:52 AM

Quote:

Originally Posted by sourkraut

looking good travis. any metal floating around in there?

You know, I didn't see much metal at all and it didn't seem to have as much slack in it as my '90 10bolt but then I didn't have it up on a lift like Scott did with my other truck so it's hard to say. Maybe it had been flushed before but I did notice that the old lube seemed to be extremely thick. It was a little low too. Should have been more in it than what I got out but I didn't see any big leaks.

*highperf4x4* · 04-24-2010, 02:33 AM

Out with the old..............

And in with the new.................well, kinda.

JohnC · 04-24-2010, 08:56 AM

Cool. Did you notice any improvement in driving it with the HEI?

*TheSebring* · 04-24-2010, 10:40 AM

He sure did. We lined up the Cheyenne against it on a back road over here and the first time he sorta bogged down because he'd tried to hold the gas and the brake. The second go round, he dropped his arm and just let off the brake and stepped on the gas and that friggin' truck LAUNCHED. By 45 he had a truck length and a little change on me.

*highperf4x4* · 04-24-2010, 01:55 PM

Yessir, it's right as rain and "all there". Blown engine support group here I come!!!!

*highperf4x4* · 04-24-2010, 03:10 PM

Quote:

Originally Posted by JohnC

Cool. Did you notice any improvement in driving it with the HEI?

I mean for pete's sake, I've already sucked one of the headlights out of Neil's new hotrod!!!!
http://67-72chevytrucks.com/vboard/s...373329&page=18

*highperf4x4* · 04-24-2010, 05:24 PM

I stress tested it this afternoon.

Drove it to the car wash and blasted everything under the hood then jumped in fired it up and drove it home. Ran like a champ!!

JohnC · 04-24-2010, 06:58 PM

Quote:

Originally Posted by highperf4x4

I mean for pete's sake, I've already sucked one of the headlights out of Neil's new hotrod!!!!
http://67-72chevytrucks.com/vboard/s...373329&page=18

Quote:

Originally Posted by highperf4x4

I stress tested it this afternoon.

Drove it to the car wash and blasted everything under the hood then jumped in fired it up and drove it home. Ran like a champ!!

Sweet!

*highperf4x4* · 04-24-2010, 07:22 PM

Quote:

Originally Posted by JohnC

Sweet!

Just wait. He's going to get me back.

He'll probably make me race him at the truck meet!!

*highperf4x4* · 04-24-2010, 10:25 PM

Ok, so I cleaned up as much as I could under the hood and now I'll have to pull what I can and break out the paint. Since I can't really get the engine block and heads as clean as they should be then I'll leave them until I pull the engine. I'll probaby do the valve covers, fender wells, maybe the bottom of the hood, breather, etc.

I also got the clips and stickies ground off the passenger's side and got all the emblems removed.

I'm not sure if I'm going to reuse the Sierra Grande emblems or sell them and get some new ones.

I also found that the right front fender has been repaired at some time and has some bondo on it that's cracking. I'll go ahead and sand what I can and shoot some sealer on it for now but I'll probably replace it before the final go around. I didn't get a pic of it though. Maybe tomorrow. I'm gonna go soak my weary bones in the hot tub!!

*beechd18* · 04-24-2010, 10:38 PM

You better start putting some performance parts on that BIG block before the meet so I don't leave it to far behind!!!

*highperf4x4* · 04-24-2010, 10:49 PM

Quote:

Originally Posted by beechd18

You better start putting some performance parts on that BIG block before the meet so I don't leave it to far behind!!!

How many seconds head start do I get???????

*beechd18* · 04-24-2010, 10:51 PM

Quote:

Originally Posted by highperf4x4

How many seconds head start do I get???????

UMMMMM NONE you said were running for pinks right..

*highperf4x4* · 04-24-2010, 10:52 PM

Quote:

Originally Posted by beechd18

UMMMMM NONE you said were running for pinks right..

If that's the case then I'm going to help you work on your engine next Saturday.

*beechd18* · 04-24-2010, 11:00 PM

Quote:

Originally Posted by highperf4x4

If that's the case then I'm going to help you work on your engine next Saturday.

That OK I have that under control!!! You just worry about sanding big boy!!!

**scotts62** · 04-24-2010, 11:10 PM

*highperf4x4* · 04-24-2010, 11:35 PM

Quote:

Originally Posted by beechd18

That OK I have that under control!!! You just worry about sanding big boy!!!

I'm working on it.

'72customdeluxe · 04-24-2010, 11:38 PM

Quote:

Originally Posted by scotts62

heck yeah just throw the Mobile in it it will be fine

I figured he knew better but wasn't sure

That thin stuff might make your truck feel quicker for a few miles. I'm sure my axle fluid desperately needs changing (noisy as heck) but someone rounded out the frakking fill bolt... I could drill the cover to use as a filll at school but don't care enough to do it

04-23-2010, 01:20 AM	#701
'72customdeluxe Registered User Join Date: Jan 2008 Location: Tejas Posts: 691	Re: And so it begins................ Aren't you supposed to run hypoid gear oil? __________________ '72 cheyenne super step, '05 long bed gmc

04-23-2010, 01:55 AM	#702
TheSebring Account Suspended Join Date: May 2009 Location: Noble,Ok Posts: 576	Re: And so it begins................ And I like that orange syphon pump you got there. Have to get me one of those .

04-23-2010, 07:50 AM	#704
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: And so it begins................ heck yeah just throw the Mobile in it it will be fine __________________ Scott 93 crew cab build Project 62

04-23-2010, 09:56 AM	#705
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: And so it begins................ Hope that was your noise, and this corrects it.

04-23-2010, 06:11 PM	#706
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: And so it begins................ Doubt it __________________ Scott 93 crew cab build Project 62

04-23-2010, 06:18 PM	#707
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: And so it begins................ looking good travis. any metal floating around in there? __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

04-24-2010, 02:33 AM	#709
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ Out with the old.............. And in with the new.................well, kinda. Last edited by highperf4x4; 04-24-2010 at 02:34 AM.

04-24-2010, 08:56 AM	#710
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: And so it begins................ Cool. Did you notice any improvement in driving it with the HEI?

04-24-2010, 10:40 AM	#711
TheSebring Account Suspended Join Date: May 2009 Location: Noble,Ok Posts: 576	Re: And so it begins................ He sure did. We lined up the Cheyenne against it on a back road over here and the first time he sorta bogged down because he'd tried to hold the gas and the brake. The second go round, he dropped his arm and just let off the brake and stepped on the gas and that friggin' truck LAUNCHED. By 45 he had a truck length and a little change on me.

04-24-2010, 01:55 PM	#712
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ Yessir, it's right as rain and "all there". Blown engine support group here I come!!!!

04-24-2010, 05:24 PM	#714
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ I stress tested it this afternoon. Drove it to the car wash and blasted everything under the hood then jumped in fired it up and drove it home. Ran like a champ!!

04-24-2010, 10:25 PM	#717
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ Ok, so I cleaned up as much as I could under the hood and now I'll have to pull what I can and break out the paint. Since I can't really get the engine block and heads as clean as they should be then I'll leave them until I pull the engine. I'll probaby do the valve covers, fender wells, maybe the bottom of the hood, breather, etc. I also got the clips and stickies ground off the passenger's side and got all the emblems removed. I'm not sure if I'm going to reuse the Sierra Grande emblems or sell them and get some new ones. I also found that the right front fender has been repaired at some time and has some bondo on it that's cracking. I'll go ahead and sand what I can and shoot some sealer on it for now but I'll probably replace it before the final go around. I didn't get a pic of it though. Maybe tomorrow. I'm gonna go soak my weary bones in the hot tub!!

04-24-2010, 10:38 PM	#718
beechd18 Account Suspended Join Date: Nov 2009 Location: Ninnekah,OK Posts: 376	Re: And so it begins................ You better start putting some performance parts on that BIG block before the meet so I don't leave it to far behind!!!

04-24-2010, 11:10 PM	#723
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: And so it begins................ __________________ Scott 93 crew cab build Project 62



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.