What did you do to your truck today? Chapter II - Page 290 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ol Blue K20** · 09-08-2018, 08:25 PM

Quote:

Originally Posted by 84yotamann

Well for my first post ever I thought I’d share, long story short I traded a buddy work for doing a cab swap for a 67 LWB 2wd 4spd. It has a 6lug on front end which I would assume is factory and a full float Dana 60 8lug in the rear with leafs. I left work a little to happy on a Friday and grenaded the rear end. So I got a full rolling 74 chassis with SBC th350 2wd lwb. My plan is to swap the 12bilt into the 67 along with all the front suspension components to make it 5lug all around. Also I will put the th350 in it once I pull it and rebuild it.

So i finally got around to pulling the rear end and pressure washed it. Pressure washed the th350 in the chassis and it will get pulled next. Started measuring leaf spring lenghts and found I can not swap leaf spring due to length and spring width 😟. And I need a new driveling because the 60 had a 1350 ujoint and 12 bolt is 1310 I believe.

And if anyone could help me identify which trans this is would be very helpful.

I can't identify the trans without a pic of the pan. But, it's definitely a long tail shaft!!!

racenhogs · 09-08-2018, 09:55 PM

Just did some bearing work and hoping someone sees that I'm in need of a HO52 rear carrier with a 4.10 gear set...

84yotamann · 09-09-2018, 02:42 AM

3757chevy, the second half of the driveline is short do too the yoke to axle centerline being longer than the 12bolt,but yes I have herd of those.

Ol bluek20, the trans is a 4spd manual doesn't have a pan. I thought it might be an sm420 or sm465 but doesn't look like any identifing features match with one of those

**68SWB4x4** · 09-09-2018, 12:20 PM

Quote:

Originally Posted by racenhogs

Just did some bearing work and hoping someone sees that I'm in need of a HO52 rear carrier with a 4.10 gear set...

There is one here on Craigslist https://slo.craigslist.org/pts/d/eat...678463992.html

**3757chevy** · 09-09-2018, 05:48 PM

Quote:

Originally Posted by 84yotamann

3757chevy, the second half of the driveline is short do too the yoke to axle centerline being longer than the 12bolt,but yes I have herd of those.

...I see...

orangek5 · 09-09-2018, 07:11 PM

Put on new finned diff cover

Name: thumbnail (2).jpg
Views: 534
Size: 66.1 KB

Metaldoc · 09-09-2018, 07:24 PM

Now the trucks running I could catch up on needed repairs on the Woodshed. Burning all the repair scrap wood. I did have it out to local show on Fri. and to do a full detailing on it. All the glass and the dash.

oneperfectrun · 09-09-2018, 08:24 PM

Added digital gauges to my truck a couple weeks ago.

oneperfectrun · 09-09-2018, 08:29 PM

Finally got time to recover my seat and get it back in the truck this weekend. It sure is a lot more comfortable to drive with the seat recovered.

ZEKE68 · 09-09-2018, 08:36 PM

Trouble shooting the fact that I have zero rear braking with a new master cylinder and proportioning valve. Have a hard petal even with the left rear bleeder cracked open, and no flow. Think I must have a bad proportioning valve. Got another one ordered, and that doesn't fix it I will look at the rear rubber hose next. The valve trip rod is in the middle and the light is not on, and I have verified that the brake light works. Going to charge the ac tomorrow while I wait on brake parts.

ZEKE68 · 09-09-2018, 08:43 PM

Trouble shooting the fact that I have zero rear braking with a new master cylinder and proportioning valve. Have a hard petal even with the left rear bleeder cracked open, and no flow. Think I must have a bad proportioning valve. Got another one ordered, and that doesn't fix it I will look at the rear rubber hose next. The valve trip rod is in the middle and the light is not on, and I have verified that the brake light works. Going to charge the ac tomorrow while I wait on brake parts.

**68SWB4x4** · 09-09-2018, 08:46 PM

Quote:

Originally Posted by ZEKE68

Trouble shooting the fact that I have zero rear braking with a new master cylinder and proportioning valve. Have a hard petal even with the left rear bleeder cracked open, and no flow. Think I must have a bad proportioning valve. Got another one ordered, and that doesn't fix it I will look at the rear rubber hose next. The valve trip rod is in the middle and the light is not on, and I have verified that the brake light works. Going to charge the ac tomorrow while I wait on brake parts.

Sounds like the prop valve pin needs to be reset

Zeroman · 09-09-2018, 09:29 PM

Leroy got some new wheels and tires.....

**Ol Blue K20** · 09-09-2018, 09:39 PM

Quote:

Originally Posted by Zeroman

Leroy got some new wheels and tires.....

Leroy was my grandpa's name. I love it........

**nlped** · 09-09-2018, 09:49 PM

Got some work done to the chassis going under Walter...

ZEKE68 · 09-11-2018, 09:00 AM

Was a bad proportioning valve. Changed it out.

71gmcC15 · 09-11-2018, 12:28 PM

Painted my front hubs today. I know I need new rotors but this will at least makes it look good till I can get some

In The Ten Ring · 09-11-2018, 04:20 PM

Quote:

Originally Posted by 71gmcC15

Painted my front hubs today. I know I need new rotors but this will at least makes it look good till I can get some

I am with you there! I recently painted my daily driver's drums and those look so much better. *I very nearly painted the hubs also but figured I needed high temp paint. I did paint the center of the rotors, just to allow the alloy wheels to not have "dissimilar metal corrosion" as much.

**1971Stepside** · 09-11-2018, 04:33 PM

Painted my engine today.

**dflarsen77** · 09-12-2018, 01:16 AM

Haven't posted progress in awhile because I've just been slowly taking it apart. But I'm planning to finally get the frame fixed and the body media blasted tomorrow, so I got the bed onto a dolly this past weekend, and tonight I got the doors disassembled and taken off, and the windshield and rear window off. I tried to do Lockdoc's old method where you stuff the garden hose under to kind of hold the seal out, but my seal is rock hard so it wasn't happening. Had to cut it. But I got it all out! Now it's ready for blasting and then I'll be painting for a week or so!

tdangle · 09-12-2018, 10:28 AM

I can see the gauges now. Upgraded to led lights

**3757chevy** · 09-12-2018, 01:05 PM

Quote:

Originally Posted by tdangle

I can see the gauges now. Upgraded to led lights

WOW looks good.

stevenfromtexas · 09-12-2018, 02:03 PM

been driving my pickup around as much as possible. turned over 500 miles today

so-far-so-good nothing has come flying through the hood yet....that's a good thing. peeled-out at a stop light today too....hahahahah i can only imagine my little 250 saying, "WTF was that for???"

stevenfromtexas · 09-12-2018, 02:06 PM

Quote:

Originally Posted by tdangle

I can see the gauges now. Upgraded to led lights

looks very nice!!

**3757chevy** · 09-12-2018, 04:04 PM

Quote:

Originally Posted by stevenfromtexas

...peeled-out at a stop light today too....hahahahah i can only imagine my little 250 saying, "WTF was that for???"

....CAUSE IT COULD

09-08-2018, 09:55 PM	#7227
racenhogs Registered User Join Date: Sep 2018 Location: Yuma, AZ Posts: 9	Re: What did you do to your truck today? Chapter II Just did some bearing work and hoping someone sees that I'm in need of a HO52 rear carrier with a 4.10 gear set... Attached Images

09-09-2018, 02:42 AM	#7228
84yotamann Registered User Join Date: Aug 2017 Location: Folsom, CA Posts: 5	Re: What did you do to your truck today? Chapter II 3757chevy, the second half of the driveline is short do too the yoke to axle centerline being longer than the 12bolt,but yes I have herd of those. Ol bluek20, the trans is a 4spd manual doesn't have a pan. I thought it might be an sm420 or sm465 but doesn't look like any identifing features match with one of those __________________ 2008 GMC 2500HD 6.6l Duramax Diesel 67 GMC long bed 2wd my "main squeeze" 85 Toyota project, SBC, TH350, D60 front, D70 Rear, 3 linked Front, 4 link Rear. 43 Willys, family heirloom

09-09-2018, 07:11 PM	#7231
orangek5 Registered User Join Date: Nov 2008 Location: Rose Hill Ks Posts: 290	Re: What did you do to your truck today? Chapter II Put on new finned diff cover __________________ 1970 Jimmy 4x4 IL6 1971 Jimmy 4x4 350ci v8 1971 SWB 327ci v8 1972 Short Stepside 305ci v8 1972 Blazer 2WD CST LS9 350ci 4sp 1999 4 Door LB 1 Ton Old Body Style 5.7 v8

09-09-2018, 07:24 PM	#7232
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: What did you do to your truck today? Chapter II Now the trucks running I could catch up on needed repairs on the Woodshed. Burning all the repair scrap wood. I did have it out to local show on Fri. and to do a full detailing on it. All the glass and the dash. Attached Images __________________ Do it, Do it right, Do it right the first time

09-09-2018, 08:24 PM	#7233
oneperfectrun Registered User Join Date: Aug 2011 Location: Fulton, MS Posts: 87	Re: What did you do to your truck today? Chapter II Added digital gauges to my truck a couple weeks ago. Attached Images __________________ __________________ Jeff

09-09-2018, 08:29 PM	#7234
oneperfectrun Registered User Join Date: Aug 2011 Location: Fulton, MS Posts: 87	Re: What did you do to your truck today? Chapter II Finally got time to recover my seat and get it back in the truck this weekend. It sure is a lot more comfortable to drive with the seat recovered. Attached Images __________________ __________________ Jeff

09-09-2018, 08:36 PM	#7235
ZEKE68 Registered User Join Date: Jul 2012 Location: Space Coast, Florida Posts: 403	Re: What did you do to your truck today? Chapter II Trouble shooting the fact that I have zero rear braking with a new master cylinder and proportioning valve. Have a hard petal even with the left rear bleeder cracked open, and no flow. Think I must have a bad proportioning valve. Got another one ordered, and that doesn't fix it I will look at the rear rubber hose next. The valve trip rod is in the middle and the light is not on, and I have verified that the brake light works. Going to charge the ac tomorrow while I wait on brake parts. __________________ 1968 SWB Step Side, Big Block, 4L80E , Running!

09-09-2018, 08:43 PM	#7236
ZEKE68 Registered User Join Date: Jul 2012 Location: Space Coast, Florida Posts: 403	Re: What did you do to your truck today? Chapter II Trouble shooting the fact that I have zero rear braking with a new master cylinder and proportioning valve. Have a hard petal even with the left rear bleeder cracked open, and no flow. Think I must have a bad proportioning valve. Got another one ordered, and that doesn't fix it I will look at the rear rubber hose next. The valve trip rod is in the middle and the light is not on, and I have verified that the brake light works. Going to charge the ac tomorrow while I wait on brake parts. __________________ 1968 SWB Step Side, Big Block, 4L80E , Running!

09-09-2018, 09:29 PM	#7238
Zeroman Registered User Join Date: Mar 2013 Location: Houston, TX Posts: 348	Re: What did you do to your truck today? Chapter II Leroy got some new wheels and tires..... Attached Images

09-09-2018, 09:49 PM	#7240
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: What did you do to your truck today? Chapter II Got some work done to the chassis going under Walter... Attached Images __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

09-11-2018, 09:00 AM	#7241
ZEKE68 Registered User Join Date: Jul 2012 Location: Space Coast, Florida Posts: 403	Re: What did you do to your truck today? Chapter II Was a bad proportioning valve. Changed it out. __________________ 1968 SWB Step Side, Big Block, 4L80E , Running!

09-11-2018, 12:28 PM	#7242
71gmcC15 Registered User Join Date: Feb 2018 Location: Doland SD Posts: 836	Re: What did you do to your truck today? Chapter II Painted my front hubs today. I know I need new rotors but this will at least makes it look good till I can get some Attached Images __________________ ( second times the charm) 71 gmc c15 307 sbc 373 rear gears positrac sm 465 trans. ( not listed on spid but is original ) 94 chevy k1500 350 tbi 373 rear gears 4l60e one wheel peel. Gutless 07 gmc sierra classic rcsb 4.3 lt 5 speed w/t 04 chevy Silverado 1500 ext cab 5.3 4l60e. 81 chevy Scottsdale k10 muncie sm465 Np208 10 bolt 8.2 ( Old Green)

09-11-2018, 04:33 PM	#7244
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Re: What did you do to your truck today? Chapter II Painted my engine today. Attached Images __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

09-12-2018, 01:16 AM	#7245
dflarsen77 Active Member Join Date: Jun 2016 Location: Salida, CA Posts: 177	Re: What did you do to your truck today? Chapter II Haven't posted progress in awhile because I've just been slowly taking it apart. But I'm planning to finally get the frame fixed and the body media blasted tomorrow, so I got the bed onto a dolly this past weekend, and tonight I got the doors disassembled and taken off, and the windshield and rear window off. I tried to do Lockdoc's old method where you stuff the garden hose under to kind of hold the seal out, but my seal is rock hard so it wasn't happening. Had to cut it. But I got it all out! Now it's ready for blasting and then I'll be painting for a week or so! Attached Images __________________ David Larsen 1970 Chevrolet C-10

09-12-2018, 10:28 AM	#7246
tdangle Registered User Join Date: Mar 2005 Location: Jurupa Valley, Ca Posts: 1,210	Re: What did you do to your truck today? Chapter II I can see the gauges now. Upgraded to led lights Attached Images __________________ Terry 1970 Custom Camper/C20 , GM Crate 350/7004R, Dana 60, factory AC



Register or Log In To remove these advertisements.

09-12-2018, 02:03 PM	#7248
stevenfromtexas Registered User Join Date: Mar 2013 Location: Hewitt, Texas Posts: 444	Re: What did you do to your truck today? Chapter II been driving my pickup around as much as possible. turned over 500 miles today so-far-so-good nothing has come flying through the hood yet....that's a good thing. peeled-out at a stop light today too....hahahahah i can only imagine my little 250 saying, "WTF was that for???" __________________ Steven '67 SWB, 250ci, 3OTT.......this is my first build...... I wonder if my grand kids will say, "I would give anything to have my grand dads 2005 Chevrolet Z71"

Register or Log In To remove these advertisements.