Nik's 62 build - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TJ's Chevy · 10-11-2015, 07:14 PM

Liking the knob.

62stepside longbox · 10-11-2015, 08:03 PM

Quote:

Originally Posted by TJ's Chevy

Liking the knob.

thanks tj, i might also make a ashtray handle out of maple

62stepside longbox · 10-11-2015, 09:12 PM

Got lots done today
Got my seat and gas tank out to find out the mice did get to the truck

The gas spill did a number to my driveway

62stepside longbox · 10-11-2015, 09:16 PM

Made myself an inner rocker

62stepside longbox · 10-11-2015, 09:18 PM

Got the monster dent out of the corner of the cab

RANDY COX · 10-12-2015, 09:07 AM

Looking good, I see the Infamous green paint under that orange, they must have painted over half of these trucks built that green..

62stepside longbox · 10-12-2015, 09:16 PM

Welded in the inner fender that I made and did some other body work. Once I get my rocker in and grind down some of the welds, it will look like new

. I also have plans to soon make some custom door sill plates.

65sub · 10-12-2015, 09:40 PM

Good job on the inner rocker. Made it yourself and saved some money.

62stepside longbox · 10-12-2015, 10:08 PM

Quote:

Originally Posted by 65sub

Good job on the inner rocker. Made it yourself and saved some money.

Thanks man, Looks like your suburbans twisted sister is coming along well

62stepside longbox · 10-12-2015, 10:12 PM

Quote:

Originally Posted by RANDY COX

Looking good, I see the Infamous green paint under that orange, they must have painted over half of these trucks built that green..

Tell me about it. I was on a road trip and pulled over to take a look at a truck I spotted, a stepside longbox that was orange with the same turquoise underneath. It wasn't a 62, but pretty darn close.

62stepside longbox · 10-17-2015, 02:13 AM

Got my engine back together and now I'm having starter problems. Pulled the starter out today and will bench test it tomorrow

TJ's Chevy · 10-17-2015, 10:52 AM

Great job working the metal.

62stepside longbox · 10-17-2015, 03:32 PM

Quote:

Originally Posted by TJ's Chevy

Great job working the metal.

Thanks tj, still have rust repair to do on every panel but the hood

62stepside longbox · 10-19-2015, 02:08 AM

Cut the rib off of the bondo covered fender and welded it on to the red gmc fender that I got. Also welded on the bottom corner patch panel. The picture looks bad but it is all squared up and has the right curve to it. A little grinding smooth and it will look like new. Looks like I have a new Franken fender

62stepside longbox · 10-19-2015, 08:46 PM

Got my radio polished up and painted and stained and cleared the knobs that I made from maple.

TJ's Chevy · 10-19-2015, 09:15 PM

Good job on the radio! Looks good.

62stepside longbox · 10-20-2015, 11:05 AM

Thanks tj, thought I would finish this to take a break from the rust

62stepside longbox · 10-26-2015, 09:08 PM

Cleaned all of my terminals and now the starter works beautifully

TJ's Chevy · 10-26-2015, 10:46 PM

WHAT!?!?!? No video?

lol

62stepside longbox · 10-27-2015, 01:50 AM

Quote:

Originally Posted by TJ's Chevy

WHAT!?!?!? No video?

lol

Don't worry tj

i just need to rig up a temporary gas tank and I will make a video

62stepside longbox · 10-27-2015, 09:12 PM

Decided to try some simulated wood grain for the first time on the ash tray handle to match the radio knobs. Turned out pretty nice and I may do it on other pieces.

TJ's Chevy · 10-27-2015, 09:27 PM

Looks good.

62stepside longbox · 10-27-2015, 10:30 PM

Quote:

Originally Posted by TJ's Chevy

Looks good.

Thanks

62stepside longbox · 11-01-2015, 10:30 PM

Made a patch panel for the drivers step and welded it in place

TJ's Chevy · 11-01-2015, 10:39 PM

Nice job.

10-11-2015, 07:14 PM	#51
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: A 15 year old's project. Rusty 62 stepside Liking the knob. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

10-11-2015, 09:12 PM	#53
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside Got lots done today Got my seat and gas tank out to find out the mice did get to the truck The gas spill did a number to my driveway Attached Images __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

10-11-2015, 09:16 PM	#54
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside Made myself an inner rocker Attached Images __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

10-11-2015, 09:18 PM	#55
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside Got the monster dent out of the corner of the cab Attached Images __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

10-12-2015, 09:07 AM	#56
RANDY COX Registered User Join Date: Mar 2001 Location: RADFORD, VA Posts: 2,651	Re: A 15 year old's project. Rusty 62 stepside Looking good, I see the Infamous green paint under that orange, they must have painted over half of these trucks built that green.. __________________ 1964 BBC 402 4x4

10-12-2015, 09:16 PM	#57
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside Welded in the inner fender that I made and did some other body work. Once I get my rocker in and grind down some of the welds, it will look like new. I also have plans to soon make some custom door sill plates. Attached Images __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

10-12-2015, 09:40 PM	#58
65sub Registered User Join Date: Jun 2014 Location: dresden , ontario Posts: 628	Re: A 15 year old's project. Rusty 62 stepside Good job on the inner rocker. Made it yourself and saved some money. __________________ Dale ---------------- My suburban's Twisted Little Sister http://67-72chevytrucks.com/vboard/s...d.php?t=655167

10-17-2015, 02:13 AM	#61
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside Got my engine back together and now I'm having starter problems. Pulled the starter out today and will bench test it tomorrow __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

10-17-2015, 10:52 AM	#62
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: A 15 year old's project. Rusty 62 stepside Great job working the metal. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

10-19-2015, 02:08 AM	#64
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside Cut the rib off of the bondo covered fender and welded it on to the red gmc fender that I got. Also welded on the bottom corner patch panel. The picture looks bad but it is all squared up and has the right curve to it. A little grinding smooth and it will look like new. Looks like I have a new Franken fender Attached Images __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

10-19-2015, 08:46 PM	#65
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside Got my radio polished up and painted and stained and cleared the knobs that I made from maple. Attached Images __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

10-19-2015, 09:15 PM	#66
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: A 15 year old's project. Rusty 62 stepside Good job on the radio! Looks good. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

10-20-2015, 11:05 AM	#67
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside Thanks tj, thought I would finish this to take a break from the rust __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

10-26-2015, 09:08 PM	#68
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside Cleaned all of my terminals and now the starter works beautifully __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

10-26-2015, 10:46 PM	#69
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: A 15 year old's project. Rusty 62 stepside WHAT!?!?!? No video? lol __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw



Register or Log In To remove these advertisements.

10-27-2015, 09:12 PM	#71
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside Decided to try some simulated wood grain for the first time on the ash tray handle to match the radio knobs. Turned out pretty nice and I may do it on other pieces. Attached Images __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

10-27-2015, 09:27 PM	#72
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: A 15 year old's project. Rusty 62 stepside Looks good. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

11-01-2015, 10:30 PM	#74
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside Made a patch panel for the drivers step and welded it in place Attached Images __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

11-01-2015, 10:39 PM	#75
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: A 15 year old's project. Rusty 62 stepside Nice job. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

Register or Log In To remove these advertisements.