KS parting a 1972 gmc C20 - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 01-18-2015, 08:57 PM

Its all parted, I just have to take bed, cab and motor out then cut front disc brake setup off, check exhaust hangers out. Here are pics of parts I took off that are for sale

teeitup · 01-18-2015, 08:59 PM

11

teeitup · 01-18-2015, 09:00 PM

22

teeitup · 01-18-2015, 09:35 PM

Danny69, I'll look Mon evening on harness, ran out of time tonight, I have the upper 4 core holders

teeitup · 01-18-2015, 09:38 PM

low&slow, the bracket is plastic, it was riveted so I had to cut it off, little damage on top side of bracket, won't be seen when mounted. Water temp line was cut already

teeitup · 01-18-2015, 09:39 PM

Justintime67, you interested in booster? Thanks Randy

*low&slow* · 01-19-2015, 03:40 PM

Quote:

Originally Posted by teeitup

low&slow, the bracket is plastic, it was riveted so I had to cut it off, little damage on top side of bracket, won't be seen when mounted. Water temp line was cut already

That's fine. Just mainly wanting oil pressure gauge, but I will take it all if you can hold onto them till like Thursday or so. Got a guy coming over either Tuesday or Wednesday to buy almost all my parts for these trucks.

teeitup · 01-19-2015, 09:15 AM

Thanks Danny

Zach, tan or light brown

Bob, its sold already sorry. If your wanting a 1 1/4 sway bar your going to have to go to 73 up 1 ton

Eric, these are not stock valve covers for our years, sorry

Thanks Randy

72lady · 09-22-2015, 07:37 PM

Do you still have the power steering pump and bracket? Shipped to 29360.

Jake1971 · 09-27-2015, 12:44 AM

Quote:

Originally Posted by 72lady

Do you still have the power steering pump and bracket? Shipped to 29360.

You should read this thread.

http://67-72chevytrucks.com/vboard/s...d.php?t=679700

teeitup · 01-18-2015, 09:42 PM

Jake1971, Paul, one of the badges was broke, see pic

**wcstory** · 09-27-2015, 10:17 AM

Is the gas pedal and cable available? 02649 Should fit in USPS flat rate

Never mind you have more important things to take care of

danny69 · 01-18-2015, 09:43 PM

Randy
Thanks, no big rush just hang on to the rad. holders and see what you can come with on the engine wire harness. Danny

BigRed76 · 01-19-2015, 10:00 AM

Ok if they're tan I just need the left one, does that happen to be the good one?

teeitup · 01-19-2015, 10:22 PM

Big Red76, Zach, its the drivers side, its a brown I think

teeitup · 01-19-2015, 10:23 PM

Justin, just let me know

low&slow, that will work

Thanks Randy

BigRed76 · 01-19-2015, 10:38 PM

Quote:

Originally Posted by teeitup

Big Red76, Zach, its the drivers side, its a brown I think

Ok I'll take it. Shipping will be to 80537, so just let me know a total when you get a chance. Thanks, Zach

serge · 01-20-2015, 12:27 PM

Hello Randy,
Hope this is not redundant, but do you have a workable radio speaker and bracket?

teeitup · 01-20-2015, 07:40 PM

Zach, I will get it out this week

serge, I have speaker brackets but no good speakers

Roger, sorry this one did not have one on it

Thanks Randy

serge · 01-21-2015, 08:40 AM

Randy,
How much for speaker bracket to 44041?
Serge

teeitup · 01-21-2015, 08:58 AM

I have the bracket that mounts on cab, the speaker bracket and the L bracket that mounts to radio $16 shipped. Thanks

serge · 01-21-2015, 09:32 AM

Quote:

Originally Posted by teeitup

I have the bracket that mounts on cab, the speaker bracket and the L bracket that mounts to radio $16 shipped. Thanks

HMMM! only need the speaker bracket. Will think about it.

teeitup · 01-21-2015, 01:44 PM

Serge, just the speaker bracket $8 shipped

Tdrcreyn4, its a sticker, it will tear if I try to take it off, sorry

Thanks Randy

serge · 01-22-2015, 10:15 AM

Quote:

Originally Posted by teeitup

Serge, just the speaker bracket $8 shipped

Tdrcreyn4, its a sticker, it will tear if I try to take it off, sorry

Thanks Randy

Randy,
Hoping too find speaker with bracket. If no luck will get back to you.
Thanks

serge · 01-26-2015, 09:16 AM

Quote:

Originally Posted by serge

Randy,
Hoping too find speaker with bracket. If no luck will get back to you.
Thanks

Hello Randy,
Would like to buy a speaker bracket. Let me know how you want paid.
Serge
P.S. Do you have wiring adapter that plugs into the back of radio?

01-18-2015, 08:57 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 1972 gmc C20 Its all parted, I just have to take bed, cab and motor out then cut front disc brake setup off, check exhaust hangers out. Here are pics of parts I took off that are for sale Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-18-2015, 08:59 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 1972 gmc C20 11 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-18-2015, 09:00 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 1972 gmc C20 22 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-18-2015, 09:35 PM	#4
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 1972 gmc C20 Danny69, I'll look Mon evening on harness, ran out of time tonight, I have the upper 4 core holders __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-18-2015, 09:38 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 1972 gmc C20 low&slow, the bracket is plastic, it was riveted so I had to cut it off, little damage on top side of bracket, won't be seen when mounted. Water temp line was cut already __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-18-2015, 09:39 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 1972 gmc C20 Justintime67, you interested in booster? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-19-2015, 09:15 AM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 1972 gmc C20 Thanks Danny Zach, tan or light brown Bob, its sold already sorry. If your wanting a 1 1/4 sway bar your going to have to go to 73 up 1 ton Eric, these are not stock valve covers for our years, sorry Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-22-2015, 07:37 PM	#9
72lady Registered User Join Date: Aug 2014 Location: SC Posts: 33	Re: parting a 1972 gmc C20 Do you still have the power steering pump and bracket? Shipped to 29360.

01-18-2015, 09:42 PM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 1972 gmc C20 Jake1971, Paul, one of the badges was broke, see pic __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-27-2015, 10:17 AM	#12
wcstory Registered User Join Date: Jun 2006 Location: Cape Cod, Ma. Posts: 236	Re: parting a 1972 gmc C20 Is the gas pedal and cable available? 02649 Should fit in USPS flat rate Never mind you have more important things to take care of __________________ 1966 GMC 1 Ton 305 V6 SM420 4 speed - retired Fire Dept Support Truck from Little Falls, NJ My GMC Photos

01-18-2015, 09:43 PM	#13
danny69 Registered User Join Date: Nov 2014 Location: Shawnee, OK Posts: 155	Re: parting a 1972 gmc C20 Randy Thanks, no big rush just hang on to the rad. holders and see what you can come with on the engine wire harness. Danny

01-19-2015, 10:00 AM	#14
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: parting a 1972 gmc C20 Ok if they're tan I just need the left one, does that happen to be the good one? __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

01-19-2015, 10:22 PM	#15
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 1972 gmc C20 Big Red76, Zach, its the drivers side, its a brown I think Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-19-2015, 10:23 PM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 1972 gmc C20 Justin, just let me know low&slow, that will work Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-20-2015, 12:27 PM	#18
serge Registered User Join Date: Oct 2012 Location: Geneva, Ohio Posts: 201	Re: parting a 1972 gmc C20 Hello Randy, Hope this is not redundant, but do you have a workable radio speaker and bracket? __________________ General Contrucktor



Register or Log In To remove these advertisements.

01-20-2015, 07:40 PM	#19
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 1972 gmc C20 Zach, I will get it out this week serge, I have speaker brackets but no good speakers Roger, sorry this one did not have one on it Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-21-2015, 08:40 AM	#20
serge Registered User Join Date: Oct 2012 Location: Geneva, Ohio Posts: 201	Re: parting a 1972 gmc C20 Randy, How much for speaker bracket to 44041? Serge __________________ General Contrucktor

01-21-2015, 08:58 AM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 1972 gmc C20 I have the bracket that mounts on cab, the speaker bracket and the L bracket that mounts to radio $16 shipped. Thanks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-21-2015, 01:44 PM	#23
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 1972 gmc C20 Serge, just the speaker bracket $8 shipped Tdrcreyn4, its a sticker, it will tear if I try to take it off, sorry Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.