“Castro” my new 72 build - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**GSFMECH** · 04-29-2021, 11:53 AM

Inner fenders are installed and most under hood details done.

**GSFMECH** · 04-29-2021, 11:55 AM

Interior is complete. I had to buy a new cushion grip steering wheel because I bent the one in the blue truck in the wreck. Floor mats are factory style from Classic industries. I had the same style in the blue truck. When you first get them, they have a powdery look and after a few washings they come good. Fawn was the closest color that matched, wish they were a bit darker but running them anyway. I defer to the 30-day rule. If it bothers you now, wait 30 days and if it still bothers you do something about it. The 30-day rule kicked in so I’m leaving them alone.

**GSFMECH** · 04-29-2021, 11:57 AM

A new set of undercover innovations panels on the core support, AC charged, windshield wiper washers primed and working. The Detroit speed wiper system uses a universal style washer pump which I hid up inside the fender behind the washer bottle. Wipers have 3 intermittent speeds and low and high and are a tremendous improvement over stock, they are strong and wipe really fast. They are pricey but worth it. I was sold on them on HRPT. I was following my buddy Kevin’s 68 a few times during drizzling rain and he has this system. He had his set on intermittent and I had to keep reaching and turning my stock wipers on and off every 30-45 seconds. I was watching him and grumbling about mine the whole time. Best part is it’s all hidden.

**GSFMECH** · 04-29-2021, 11:59 AM

Away to the alignment shop

**Ol Blue K20** · 04-30-2021, 08:01 AM

Nice, a very good write up. Thanks for sharing it with us.

**regan wilson** · 04-30-2021, 09:13 AM

That is one sweet little truck. I stopped in your home town for fuel on the way back from Belle Rose in February.

**GSFMECH** · 04-30-2021, 11:55 AM

Quote:

Originally Posted by Ol Blue K20

Nice, a very good write up. Thanks for sharing it with us.

Thanks, I appreciate that.

Quote:

Originally Posted by regan wilson

That is one sweet little truck. I stopped in your home town for fuel on the way back from Belle Rose in February.

Thanks, I only live a mile and a half from the interstate where you probably gassed up. I'm overseas right now but next time give me a shout and stop by.

**GSFMECH** · 04-30-2021, 12:01 PM

The first thing that happened after driving it down the road after alignment was the used hydro boost failed so I had to buy a rebuilt unit. I made this contraption to remove the push rod from the new hydro boost, so I could swap in the pushrod I had previously fabricated. The push rods are crimped into the hydro boost shaft. I opened up the hole for the pushrod in the new booster with a 3/8” drill bit and was able to swap it into the new one. Man, this thing will stop!!

**GSFMECH** · 04-30-2021, 12:03 PM

The tailgate had been replaced at some point in the past and was originally blue, it looked like they poured paint through a fan to splatter it on there, it was rough, plus it was splitting apart at the spot welds. The one that came with the SWB bed was even worse with holes rusted through and was a GMC tailgate. I decided to repaint the gate off the blue truck which is perfect, I’ll keep an eye out for a good used original paint ochre one. Nobody even seems to notice it or even care so I’ll probably leave it as is. Refer to the 30 day rule.

**GSFMECH** · 04-30-2021, 12:05 PM

My Buddy James (fishingjred73) did some pin stripping on the glove box door, I love this. He did an awesome job.

61_FL_Apache · 05-04-2021, 01:00 PM

Vintage! Oh yeah!!

burnie6bt · 05-04-2021, 01:15 PM

Not on here a bunch but just read through your build, great work. I love the methodical upgrades and the interior. Looks almost stock but many modern touches! Look forward to seeing more of this truck!

**dec010974** · 05-04-2021, 01:44 PM

awesome.

**Kronald_70GMC** · 05-04-2021, 06:36 PM

What a cool truck. Too bad about the blue one but at least you were able to re use some of it. Looks like a ton of fun!

**GSFMECH** · 05-05-2021, 11:29 AM

Quote:

Originally Posted by 61_FL_Apache

Vintage! Oh yeah!!

Thanks Steve, yeah love those vintage valve covers

Quote:

Originally Posted by burnie6bt

Not on here a bunch but just read through your build, great work. I love the methodical upgrades and the interior. Looks almost stock but many modern touches! Look forward to seeing more of this truck!

Many Thanks,that was exactly what I was trying to do. I need to get it outside and get some better photos

Quote:

Originally Posted by dec010974

awesome.

Thanks bro

Quote:

Originally Posted by Kronald_70GMC

What a cool truck. Too bad about the blue one but at least you were able to re use some of it. Looks like a ton of fun!

Kyle, many thanks. I have been following your adventures as well and it's looking great, yes this was a fun build because I didn't have to paint the whole truck and if it doesn't bother me that the paints not perfect. I was real picky on the blue truck and didn't want to go through that again.

**GSFMECH** · 05-27-2021, 04:46 PM

Finally home from overseas and took her out and got bugs on it!

65StreetCruiser · 05-27-2021, 09:12 PM

Looking good, Mike. Nothing like getting out and driving these old trucks!

**GSFMECH** · 05-29-2021, 05:17 PM

Made a little road trip to Steven's (Smbrouss70) this morning to do a little tuning on his GTO and to check out progress on gringoloco's truck. Visited with Kevin (65streetcruiser) and Steven for awhile.

**Palf70Step** · 05-29-2021, 06:06 PM

Glad you are back Mike. Good to see Castro getting some work. Can't wait to see it in person, Hopefully soon.

**GSFMECH** · 05-29-2021, 06:26 PM

Quote:

Originally Posted by Palf70Step

Glad you are back Mike. Good to see Castro getting some work. Can't wait to see it in person, Hopefully soon.

Me too Bill it's been too long since I've seen you, hate I missed you at the meet. I am gonna follow your lead and retire soon, missing too much truck stuff. Hey I don't worry about the bugs on this one like I did on the blue truck lol.

**GSFMECH** · 06-06-2021, 06:51 PM

After running this thing awhile the AC is not doing so good. When you get it charged with the right amount of 134A the pressure falls to zero when the clutch engages after about 10 seconds. Acts like something is plugged. I called up vintage air and they gave me a couple of possibilities. The one thing they thought on top of the list was a plugged expansion valve from the "crumbs" made when you cut the hose. So i pulled it all apart and changed the expansion valve. We'll see what happens when I'm done.

**Kronald_70GMC** · 06-06-2021, 06:54 PM

That's unfortunate. Hopefully that solves your problem and your back on the road asap.

**GSFMECH** · 06-13-2021, 07:38 AM

Quote:

Originally Posted by Kronald_70GMC

That's unfortunate. Hopefully that solves your problem and your back on the road asap.

Thanks Kyle. I still haven't got it cooling right. I am in Waxahachie Tx for the Classic truck nationals and Vintage air was there. They gave me a few more things to check and i will be speaking to their tech guys tomorrow on how to troubleshoot the controls. They are great folks to deal with. I also ran into our old buddy Mike Losh yesterday, he does the slosh tubz and I got to check out his reproduction buddy buckets in person. Man they are nice. If someone needs a set he is the man, he also has them for square bodies. I wish I would have taken photos but my phone was dead.

aggie91 · 08-10-2021, 01:07 PM

just read through this thread. Nice work and such a good way to use good parts off the blue truck to build this one up. Hopefully, I can check it out at C10's in the Park next month. I must have missed it at the Classic Truck Nationals.

**GSFMECH** · 08-12-2021, 01:27 PM

Quote:

Originally Posted by aggie91

just read through this thread. Nice work and such a good way to use good parts off the blue truck to build this one up. Hopefully, I can check it out at C10's in the Park next month. I must have missed it at the Classic Truck Nationals.

Thanks Karl. If nothing happens I'll be there.

04-29-2021, 11:53 AM	#1
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: “Castro” my new 72 build Inner fenders are installed and most under hood details done. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-29-2021, 11:55 AM	#2
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: “Castro” my new 72 build Interior is complete. I had to buy a new cushion grip steering wheel because I bent the one in the blue truck in the wreck. Floor mats are factory style from Classic industries. I had the same style in the blue truck. When you first get them, they have a powdery look and after a few washings they come good. Fawn was the closest color that matched, wish they were a bit darker but running them anyway. I defer to the 30-day rule. If it bothers you now, wait 30 days and if it still bothers you do something about it. The 30-day rule kicked in so I’m leaving them alone. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-29-2021, 11:57 AM	#3
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: “Castro” my new 72 build A new set of undercover innovations panels on the core support, AC charged, windshield wiper washers primed and working. The Detroit speed wiper system uses a universal style washer pump which I hid up inside the fender behind the washer bottle. Wipers have 3 intermittent speeds and low and high and are a tremendous improvement over stock, they are strong and wipe really fast. They are pricey but worth it. I was sold on them on HRPT. I was following my buddy Kevin’s 68 a few times during drizzling rain and he has this system. He had his set on intermittent and I had to keep reaching and turning my stock wipers on and off every 30-45 seconds. I was watching him and grumbling about mine the whole time. Best part is it’s all hidden. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com Last edited by GSFMECH; 04-29-2021 at 12:08 PM.

04-29-2021, 11:59 AM	#4
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: “Castro” my new 72 build Away to the alignment shop Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-30-2021, 08:01 AM	#5
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,243	Re: “Castro” my new 72 build Nice, a very good write up. Thanks for sharing it with us. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

04-30-2021, 09:13 AM	#6
regan wilson Senior Member Join Date: Mar 2008 Location: tyler texas Posts: 1,537	Re: “Castro” my new 72 build That is one sweet little truck. I stopped in your home town for fuel on the way back from Belle Rose in February. __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

04-30-2021, 12:01 PM	#8
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: “Castro” my new 72 build The first thing that happened after driving it down the road after alignment was the used hydro boost failed so I had to buy a rebuilt unit. I made this contraption to remove the push rod from the new hydro boost, so I could swap in the pushrod I had previously fabricated. The push rods are crimped into the hydro boost shaft. I opened up the hole for the pushrod in the new booster with a 3/8” drill bit and was able to swap it into the new one. Man, this thing will stop!! Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-30-2021, 12:03 PM	#9
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: “Castro” my new 72 build The tailgate had been replaced at some point in the past and was originally blue, it looked like they poured paint through a fan to splatter it on there, it was rough, plus it was splitting apart at the spot welds. The one that came with the SWB bed was even worse with holes rusted through and was a GMC tailgate. I decided to repaint the gate off the blue truck which is perfect, I’ll keep an eye out for a good used original paint ochre one. Nobody even seems to notice it or even care so I’ll probably leave it as is. Refer to the 30 day rule. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

04-30-2021, 12:05 PM	#10
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: “Castro” my new 72 build My Buddy James (fishingjred73) did some pin stripping on the glove box door, I love this. He did an awesome job. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

05-04-2021, 01:00 PM	#11
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: “Castro” my new 72 build Vintage! Oh yeah!! __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

05-04-2021, 01:15 PM	#12
burnie6bt Registered User Join Date: Feb 2012 Location: Fruitport, MI Posts: 38	Re: “Castro” my new 72 build Not on here a bunch but just read through your build, great work. I love the methodical upgrades and the interior. Looks almost stock but many modern touches! Look forward to seeing more of this truck!

05-04-2021, 01:44 PM	#13
dec010974 Senior Member Join Date: Oct 2012 Location: Miami, Florida Posts: 932	Re: “Castro” my new 72 build awesome.

05-04-2021, 06:36 PM	#14
Kronald_70GMC Senior Member Join Date: Sep 2015 Location: Martensville, Saskatchewan Posts: 966	Re: “Castro” my new 72 build What a cool truck. Too bad about the blue one but at least you were able to re use some of it. Looks like a ton of fun! __________________ Kyle 1970 GMC "Project Splice" 2017 Silverado LTZ (Daily Driver) IG: kyle_ronald

05-27-2021, 04:46 PM	#16
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: “Castro” my new 72 build Finally home from overseas and took her out and got bugs on it! Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

05-27-2021, 09:12 PM	#17
65StreetCruiser It Is What It Is Join Date: Mar 2004 Location: Natchitoches, La. Posts: 155	Re: “Castro” my new 72 build Looking good, Mike. Nothing like getting out and driving these old trucks! __________________ Kevin 65 Chevy SWB Fleetside Custom Cab (sold, so long old friend it was a fun ride) 68 Chevy SWB Fleetside Custom Cab 68 Camaro convertible www.louisianaclassictruckclub.com



Register or Log In To remove these advertisements.

05-29-2021, 05:17 PM	#18
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: “Castro” my new 72 build Made a little road trip to Steven's (Smbrouss70) this morning to do a little tuning on his GTO and to check out progress on gringoloco's truck. Visited with Kevin (65streetcruiser) and Steven for awhile. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

05-29-2021, 06:06 PM	#19
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,086	Re: “Castro” my new 72 build Glad you are back Mike. Good to see Castro getting some work. Can't wait to see it in person, Hopefully soon. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

06-06-2021, 06:51 PM	#21
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: “Castro” my new 72 build After running this thing awhile the AC is not doing so good. When you get it charged with the right amount of 134A the pressure falls to zero when the clutch engages after about 10 seconds. Acts like something is plugged. I called up vintage air and they gave me a couple of possibilities. The one thing they thought on top of the list was a plugged expansion valve from the "crumbs" made when you cut the hose. So i pulled it all apart and changed the expansion valve. We'll see what happens when I'm done. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

06-06-2021, 06:54 PM	#22
Kronald_70GMC Senior Member Join Date: Sep 2015 Location: Martensville, Saskatchewan Posts: 966	Re: “Castro” my new 72 build That's unfortunate. Hopefully that solves your problem and your back on the road asap. __________________ Kyle 1970 GMC "Project Splice" 2017 Silverado LTZ (Daily Driver) IG: kyle_ronald

08-10-2021, 01:07 PM	#24
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: “Castro” my new 72 build just read through this thread. Nice work and such a good way to use good parts off the blue truck to build this one up. Hopefully, I can check it out at C10's in the Park next month. I must have missed it at the Classic Truck Nationals. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

Register or Log In To remove these advertisements.