OMG Honda door weatherstripping fits perfect no cutting required !!

[brian1971]

Jfnar they are way to short.

[dgheinen]

Originally Posted by Grumpy old man

You may as well drop a honda 4 cyl in too while your at it , and some back up cameras ,a bunch of led's and maybe drop it on bags mounted to a rusty frame and take it to the ground and hey why not hack out the dash and install a chinese stereo and amps with some boom speakers ? so you can't hear that fart can exhaust ? and hey some cheap aftermarket race seats would fit right in ?

I'll never understand the instant gratification generation ...

Wow! Somehow, someone finding a great solution to a common problem in a cost effective and efficient way is a bad thing.

[jfnar]

Ok, thanks. The U Pull it near me doesn't have any 2 dr hondas and only one 4 dr. I may get the ones from the 4 dr and splice them.

[907debow1234]

Thanks for this helpful hint.. I plan to snag new gaskets off a scraped civic tomorrow. .

[brian1971]

Found another set of the Honda door seals today at the Fort Lauderdale LKQ U-Pullit.They are the Graphite color and are in good shape.I took them off they are inside this car.

[67ChevyRedneck]

Originally Posted by crakarjax

Found it, ex 72310-SVA-A01 - $50 each

Are they the same R to L?

[brian1971]

They are different.Same side will work but join mark will be in different location.

[Greasey Harley]

Originally Posted by '70_402

With this ideology you should still be using an points ignition... are you? Cause why fix something that's not broken, innovation and an open mind are useless right?

My truck still has points.
Electronic ignitions are pointless.

[Hvychvy970]

Originally Posted by mrlobster

Put a set of Honda door seals on my 72 GMC tonight- fit was near perfect, just had to cut it and trim about 1.5" from its total length. The doors shut with just the right amount of effort- no slamming necessary!
I had a set of Precision push-on seals prior and the doors were near impossible to shut. They are a quality product, just didn't fit right for me.

I just ordered some new seals. They don’t seem to have a lip to slide over the door seal channel. Is this what yours look like?

[brian1971]

Those look like the wrong year or model,what year did you order.

[Hvychvy970]

Originally Posted by brian1971

Those look like the wrong year or model,what year did you order.

I ordered for a 2008 2 door.
Here is the link... https://www.hondapartsnow.com/genuin...0-sva-305.html

[brian1971]

The part number is right but they sent you earlier model or there for an Accord.
Been awhile since I was at junkyard looking at them.

[brian1971]

See how the ones you have are cut on the bottom for sill panel.The civic ones don't have those cutouts.

[panhead59]

That hondaparts now link shows part # ending in 305. A01 WAS STATED AS BEING CORRECT #. ????????

[panhead59]

305 replaced A01. MIGHT have something to do with them being wrong.

[TKCR]

Originally Posted by volksworld

went to grab a set off a 2008 at LKQ today...the seal has an extra inner lip about 3/4 of an inch wide that covers the edge of the upholstery on the honda...not sure if it will touch the metal around the door frame ....looks like it may have 1/4 inch of standoff when installed....unfortunately the car i found had a light grey interior so this lip was grey 3/4 of the way around and black where it went under the rocker trim panel....so i guess these will only work if you find one with a black interior...at least it wasnt the only thing i went there for...

Originally Posted by Hvychvy970

I just ordered some new seals. They don’t seem to have a lip to slide over the door seal channel. Is this what yours look like?

What you got and ordered, was the door weatherstrip. It actually goes on the door. What everyone is using, is the open seal. It goes around the opening of the car itself. That's why it's called an Open Seal.

[TKCR]

https://www.hondapartsnow.com/Page_P...ds=Open%20seal

These are the open seals

[OregonNed]

I could yank them out of my '06 coupe that I hardly drive!

[Hvychvy970]

Originally Posted by TKCR

https://www.hondapartsnow.com/Page_P...ds=Open%20seal

These are the open seals

Ok. So these are the correct ones? Is gray the only color they make?

[TKCR]

Originally Posted by Hvychvy970

Ok. So these are the correct ones? Is gray the only color they make?

Here's the black. They actually come in grey, black & ivory
https://www.hondacarpartsdirect.com/...SABEgLbr_D_BwE
https://www.hondacarpartsdirect.com/...1ob25kYQ%3D%3D

[elorenzof]

Originally Posted by Precision Parts

Just an FYI, we make the push on style specifically for the 60-66 and the 67-72 which have the correct radius molded corner. You can see our install video here:

https://youtu.be/Ka5nMS05WIk


- Derek

Hello, what is the part number specifically used in the video?

[tdangle]

Might have to give these a try. I have tried the glue on ones, had to slam the doors. Bought a set of Precision push on ones that were suppose to be the best and still have to slam the door. To me it seems as if the push on part holds the rubber too far out. Getting tired of buying the same thing over and over. Either that or not run seals, then the door shuts so nice.

[panhead59]

Why won't precision address the fitment issue ? They make good stuff but are really hurting their reputation with these door seals. IMO

[NC_John]

Originally Posted by panhead59

Why won't precision address the fitment issue ? They make good stuff but are really hurting their reputation with these door seals. IMO

I've had my precision push-on door seals installed for years now. Still not "broken in." I doubt they ever will so I give up and am doing something else too. I am so freaking sick of slamming the doors over and over.

[GASoline71]

Originally Posted by panhead59

Why won't precision address the fitment issue ? They make good stuff but are really hurting their reputation with these door seals. IMO

The push on seals from Precision I have installed in my 1972 GMC fit flawlessly and they have never needed a "break in" period. They seal great and the doors open and close like they did when the truck rolled off the assembly line. These seals are a great product.

Gary