Pro Street Trucks/Cars pics!!! im in love with the fatty tires!!

[phattired84]

Here ya go

[1Bad62Pro/Street]

Double Stacked!!!!!!

YouTube- Monster Engine - Big Block

YouTube- RON SMITH INSANE 1956 CHEVY Two 671...

Man I love this Truck!!!!!!!
"ROAST'EM SLAP OFF!"

ONCE YOU GO PRO........
YOU NEVER GO SLOW.......

[atopper]

Originally Posted by phattired84

Here ya go

Who makes that hood ? me likey

[bigguy69]

what kind of blower is on that camaro?

[1Bad62Pro/Street]

They said it came of a Freight Train.

YouTube - Camaro Wheelstander with HUGE Blower!!!

[midevil1]

I need to start a build thread but this truck has been torn down and changed too much, so I'll just post pics where I can.

[red rumbler]

Originally Posted by 1Bad62Pro/Street

They said it came of a Freight Train.
YouTube - Camaro Wheelstander with HUGE Blower!!!

that is nucking futs!!!!!!!!!!!!

[1Bad62Pro/Street]

http://www.danchuk.com/Danchuk1.aspx...5-27eab8ec6043

70 Double Blown GTO - YouTube

1970 Pontiac GTO double blower - Blown Pro Street...

[drewdude92]

whats the widest wheel and tire you can fit under a stock 72 c10 half ton. Well of course lowered bout 4 to 5 inches. Backspacing specs and all on the wheels

[Hottrucks]

I'm having 5" of backspaceing added to a stock rally wheel ..My plan is to just tub it and relocate the E brake cable...one thing I did do is relocate my panard bar from stock to from the back of the trailing arm to the oposite side outside frame ( 42" ) I have amost no side travel with 1" blocks and bags in the stock spring location and a C notch...my wheels "should" be here at teh end of the week

[1Bad62Pro/Street]

1966 chevy pro street truck - YouTube

[djracer]

What did it cost and who is doing the wheels?

[68 C-10 KID]

hottrucks who's bar did you go with? Would it clear a aftermarket Diff cover? I need to go with a long bar to help the launch.

[rockvette]

I went with Stockton Wheels and had them build me a 6 hole 17x12 with a 9" backspace on a stock rearend look at my site

[Hottrucks]

Originally Posted by djracer

What did it cost and who is doing the wheels?

Cheap.....I was quoated $60 a wheel..the compnay is out of NY he's making up the jig to make any width you want I'll let you know and post a pic when they get here

Originally Posted by 68 C-10 KID

hottrucks who's bar did you go with? Would it clear a aftermarket Diff cover? I need to go with a long bar to help the launch.

I built my bar and hanger I'm running cup car trailing arms they had a hanger for an adjustable bar but it was on the driversside so I fabbed up the bar and hanger ( on te outside of the frame to add a couple more inchs ....at full dump ( my axle U bolts just clear the sides of frame) when at ride height I'm about 1/4" off..the angle of the hanger on the truck arm is aimed so it clears my stock cover pretty well and since I was fabbing the hanger I kinda put it where I wanted???

heres a pic sorry its not all shiny and painted yet te second pic is the issue with a C notch and the U bolt clearance if you need one of the hanger on the frame I can get it but its nothing but aHanger that goes from the frame down about an 1" below the frame with a hole in it??

[ProStreet71]

Hoosier Prostreet Radials 31x18.5x15. 14 in. Weld wheels with 7.5in backspacing. Stock suspension except for coilovers. Rearend is narrowed total of 6in

[68 C-10 KID]

Hottrucks, thanks that's way cool. Cup arms look much stronger than factory ones.

[Hottrucks]

Originally Posted by 68 C-10 KID

Hottrucks, thanks that's way cool. Cup arms look much stronger than factory ones.

not sure if there any stonger but they are MUCH CHEAPER ($100 at my door) they have ball mounts for the X mamber and the P bar bracket is on it...
along with a place to mount a sway bar

I would do it agin in a heartbeat

[djracer]

Are the cup arms as heavy as the truck arms?

[Hottrucks]

Originally Posted by djracer

Are the cup arms as heavy as the truck arms?

I did a side by side feel test and the Cup arms felt a bit lighter..I dont think they are quite as wide...that being said they do have the hanger for an adjustable P bar on the DS and a place to mount a sway bar....I flipped my shock mounts and added a 1" block

I havn't gotten to the sway bar add yet but is going to be an easy add...you can see the hanger with 3 threaded mounting holes on the back of the bar...I may have to relocate my air tank but havn't really thought about doing it yet??

[samwise68]

Where did you order your cup arms from? They look awesome!

-Sam.

[Hottrucks]

if your asking me I built mine...2 3/4" of 8" pipe and some flat stock..took about 2 hours but I did borrow my buddies plasma cutter to cut out the old spring pocket

[samwise68]

My apologies Hottruck - I was refering to your trailing arms. I thought they were refered to as "Cup arms" because of the Spring Cup racing. They look after market. I was just wondering where you ordered them from, because new ones would sure be nice some days.

Thanks!

-Sam.

[bigguy69]

Originally Posted by samwise68

My apologies Hottruck - I was refering to your trailing arms. I thought they were refered to as "Cup arms" because of the Spring Cup racing. They look after market. I was just wondering where you ordered them from, because new ones would sure be nice some days.

Thanks!

-Sam.

i thought the same thing? so are they cup trailing arms?

[Hottrucks]

yes they are..I'm looking for the link they where $100 shipped to my door..if you look back you can see that its a bolt in fit..comes with some free be's too look at the adjustable P bar mount and there are 3 bolt holes on the back to mount a sway bar

http://cgi.ebay.com/ebaymotors/ws/eB...CA:MOTORS:1123