![]() |
|
![]() |
#1 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,128
|
Re: 1964 GMC 3/4 ton build :D
Found another interesting ls mod on another forum quite by accident today
![]() Sean below is the link to the forum where they did this Cheers! http://www.maliburacing.com/forum/vi...p?f=34&t=79059
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Nov 2010
Location: Venus Texas
Posts: 217
|
Re: 1964 GMC 3/4 ton build :D
That's a cool trick. So tbi 4.3, cut, shim-brace, ac lines, metering orfice, accumelater,and oil replace the o'rings? Neat.
|
![]() |
![]() |
![]() |
#3 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,128
|
Re: 1964 GMC 3/4 ton build :D
Yeah Friday going to get an older truck water pump on order and see what I can do with it and the electronic throttle body. Hoping it will work just need to turn the neck a slight bit and get it aimed right.
Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: Nov 2010
Location: Venus Texas
Posts: 217
|
Re: 1964 GMC 3/4 ton build :D
Be carefull heating that aluminum up, once it melts it floods. Alternate top to bottem on both sides of the tube while useing the cheater pipe. Maybe put a wet rag on the motor?
|
![]() |
![]() |
![]() |
#5 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,128
|
Re: 1964 GMC 3/4 ton build :D
naaah will let my radiator expert do that one he does some neat stuff the pump will be off the engine when that happens
![]() Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#6 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,128
|
Re: 1964 GMC 3/4 ton build :D
WOOHOOOO@!!!!!!!!!!!!!!!!!!!! Scored an 08 gmc truck engine harness 6.2 HO engine new in box from a junkyard in IL for 170 with shipping!!!!!!!! Will be in next week and will be getting lotsa pictures of it while I do the strip down and convert to standalone!!!! Harness will be in tommorrow afternoon so will have pics coming up soon of the teardown and rebuild to make it standalone.
Sean I am attaching a pdf scan of one of the wiring schematicsI have aquired for those that are looking to do their own harnesses. This one is from a 2007 escalade 6.2 engine. I also have one for the 2008 chevy silverado and 2009 escalade if you want a copy emailed to you.
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() Last edited by sdwolff98; 03-23-2011 at 07:44 PM. Reason: new info |
![]() |
![]() |
![]() |
#7 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,128
|
Re: 1964 GMC 3/4 ton build :D
Ok been spending a little time on the ac bracket idea and here are some more pics of what I have so far. Trying to get a used ac compressor and alternator together to get them in place so I figure out how long a belt I am going to need for this setup. I got 2 of the 3 braces done and will include some pics of them and the bracket together.
Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#8 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,128
|
Re: 1964 GMC 3/4 ton build :D
Ok Gang,
Have the harness stripped and ready to take out the chaff have everything labled so I know what is what in this mass of wires lol. Here are some shots of this mess in my computer room. Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#9 |
Registered User
![]() Join Date: Nov 2010
Location: Venus Texas
Posts: 217
|
Re: 1964 GMC 3/4 ton build :D
|
![]() |
![]() |
![]() |
#10 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,128
|
Re: 1964 GMC 3/4 ton build :D
Be the best kinda spaghetti when finished and the motor will run. Gonna be adding a few circuits into the firewall plug for the mil and data link cisrcuits and also the throttle pedal wiring. Definielty got a busy few weeks ahead of me. I am currently waiting on the harness tools to come in to me at oreillys so I can de pin what I dont need and canabilize it into the harness mods.
Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#11 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,128
|
Re: 1964 GMC 3/4 ton build :D
well got the harness torn down just waiting on tools now to start taking out the connections I do not need and figuring out what the heck some of these wires go to in the scheme of things.
Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#12 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,128
|
Re: 1964 GMC 3/4 ton build :D
will have pics up tommorrow night the engine is in the truck and with the way it is mounted the transmission brackets just about slid into place on the frame mounting locations. Little bit tight on the radiator but will know more in the next few weeks when I throw the core support back and and check things out. I am definitely going to need headers the factory exahust does not clear the frame or mounts.
Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#13 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,128
|
Re: 1964 GMC 3/4 ton build :D
nearly finished with the fuel injection wiring section of the harness just waiting on a few parts to come in for it at the moment. Working on the mounting plate next for the injection harness. Will be throwing up some pics here pretty soon.
sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#14 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,128
|
Re: 1964 GMC 3/4 ton build :D
got the engine dropped in place couple of days ago and am working on where I need adjustments and such. Here are some pics of the work so far!
Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#15 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,128
|
Re: 1964 GMC 3/4 ton build :D
here are some pics of the issues i am having with the exhaust manifolds from the engine
![]() Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#16 |
1965 Chevy C10, 2005 4.8L/4l60
![]() Join Date: Aug 2004
Location: DFW Texas
Posts: 8,543
|
Re: 1964 GMC 3/4 ton build :D
SDWolf,
Should your temp sender be before the thermostat? wouldnt it kind of defeat the purpose having it after the thermostat? Im just asking.
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 ![]() ![]() ![]() support our troops! |
![]() |
![]() |
![]() |
#17 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,128
|
Re: 1964 GMC 3/4 ton build :D
Hey Clyde,
My mechanic friend said it would be fine there. So will see what happens with it I can always move it to the head ifn needs be, Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#18 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,128
|
Re: 1964 GMC 3/4 ton build :D
Got some more work done on the engine wiring in the last couple of days. I am waiting on some grommets to come in at the moment to start getting this setup in the cab and check the wiring lengths that I am going to be seeing on the engine. Here are some pics of what I have got done so far. Cheers!!
![]() Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#19 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,128
|
Re: 1964 GMC 3/4 ton build :D
Ok got the hole in the firewall cut for the harness to pass through. I cut it below the engine/frame harness in the firewall. I will prevail on my machinist to make a stainless steel filler panel to go between the two assemblies which will allow the grommet to seal all the way around the 1 3/4inch hole I cut in the firewall.
Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#20 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: 1964 GMC 3/4 ton build :D
You're doing some nice wiring work.....looks like you've done it a time or two before.
If I may ask, where are you purchasing your electrical components and supplies?
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#21 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,128
|
Re: 1964 GMC 3/4 ton build :D
Hey Captain,
After getting some stuff from del city they got great prices but the relay mounts and the fuseboxes they sent me were mehhhh quality wise. So I went to O reillys and started catalog surfing lol. the fuseboxes they have on the floor there and the bosch relay mounts I found in the catalog and orderd they were a little pricey 16 a piece but much much better than the other set I have. I am going back friday night and pick up a 3rd fusblock and rewire the injector and coil power wires in my harness.. Lol actually this is my first time doing a injection harness so we will see. After i finish up friday night will putting power to it and see where I stand with it. Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() Last edited by sdwolff98; 04-14-2011 at 10:11 AM. |
![]() |
![]() |
![]() |
#22 | |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: 1964 GMC 3/4 ton build :D
Hey Sean, thanks for the info. I'll have to check out my local O'Reilly's and see what they have. Yeah those relay mounts are a little pricey. I like the ones of that style, where the mount is secured to the body and the relay just plugs in. I have bought the Painless relay mounts from Summit before. They are that same design and are less $$ although those that you are using look to be heavier duty.
http://www.summitracing.com/search/P...yword=Painless Quote:
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
![]() |
![]() |
![]() |
#23 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,128
|
Re: 1964 GMC 3/4 ton build :D
been busy last couple of days. Bracket system is just about finished up waiting on powersteering pump to come in at the moment. Belt length is 108 and 3/4 inch outer diameter and fits nice and snug and the tensioner is right in the wear marking where it is supposed to be at. The z06 exhaust manifolds are coming along as well. I got the passenger side one in at the moment it fit without too many issues just had to remove the tin cover plate and it dropped right in place. the driver side on the other hand I am having to clearance the mount. I will be working on that tommorrow night when I get the mount pulled out of the truck and on my vise for further work. So far the exhaust touches slightly on the outer edge of the exhaust pipe mount at the end of the manifold.
Will be finishing up all this tommorrow night and dropping it in. Should have my gaskets tommorrow night also. Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#24 |
Turning Wrenches Daily
Join Date: Sep 2003
Location: Gladewater Texas
Posts: 1,128
|
Re: 1964 GMC 3/4 ton build :D
well got the driver side in as well. tapped the engine mount with a hammer and it slid forward enough to clear the manifold. Now the fun part will be for the exhaust shop. The collector is really close to the suspension caps on both passenger and driver side so they will need to setup the collectors with a couple of extra bends for clearance issues.
Sean
__________________
Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project ![]() |
![]() |
![]() |
![]() |
#25 |
Registered User
![]() Join Date: Nov 2010
Location: Venus Texas
Posts: 217
|
Re: 1964 GMC 3/4 ton build :D
Maybe it will be a good thing to go with headers, might help keep the engine cooler under loads, pulling rice burners or whatever you need to pull. I'm installing the headers on mine, only because they are what I have. I got the right side on, and to tell you the truth, they do look cooler. Those manifolds look like headers. Do they turn a 90 degree at the bottem?
Last edited by trevrolet65; 04-26-2011 at 12:31 AM. Reason: left out a question. |
![]() |
![]() |
![]() |
Bookmarks |
|
|